If the hw is in ALDPS mode, the hw may have no response for accessing
the most registers. Therefore, the ALDPS should be disabled before
accessing the hw in rtl_ops.init(), rtl_ops.disable(), rtl_ops.up(),
and rtl_ops.down(). Regardless of rtl_ops.enable(), because the hw
wouldn't enter ALDPS mode when linking on. The hw would enter the
ALDPS mode after several seconds when link down occurs and the ALDPS
is enabled.
Signed-off-by: Hayes Wang <hayesw...@realtek.com>
---
drivers/net/usb/r8152.c | 62 +++++++++++++++++++++++++++++++++++--------------
1 file changed, 45 insertions(+), 17 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 87f7104..74760e8 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2019,7 +2019,7 @@ static int rtl8153_enable(struct r8152 *tp)
return rtl_enable(tp);
}
-static void rtl8152_disable(struct r8152 *tp)
+static void rtl_disable(struct r8152 *tp)
{
u32 ocp_data;
int i;
@@ -2232,6 +2232,13 @@ static inline void r8152b_enable_aldps(struct r8152 *tp)
LINKENA | DIS_SDSAVE);
}
+static void rtl8152_disable(struct r8152 *tp)
+{
+ r8152b_disable_aldps(tp);
+ rtl_disable(tp);
+ r8152b_enable_aldps(tp);
+}
+
static void r8152b_hw_phy_cfg(struct r8152 *tp)
{
u16 data;
@@ -2242,11 +2249,8 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp)
r8152_mdio_write(tp, MII_BMCR, data);
}
- r8152b_disable_aldps(tp);
-
rtl_clear_bp(tp);
- r8152b_enable_aldps(tp);
set_bit(PHY_RESET, &tp->flags);
}
@@ -2255,9 +2259,6 @@ static void r8152b_exit_oob(struct r8152 *tp)
u32 ocp_data;
int i;
- if (test_bit(RTL8152_UNPLUG, &tp->flags))
- return;
-
ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
ocp_data &= ~RCR_ACPT_ALL;
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
@@ -2347,7 +2348,7 @@ static void r8152b_enter_oob(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
- rtl8152_disable(tp);
+ rtl_disable(tp);
for (i = 0; i < 1000; i++) {
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
@@ -2485,9 +2486,6 @@ static void r8153_first_init(struct r8152 *tp)
u32 ocp_data;
int i;
- if (test_bit(RTL8152_UNPLUG, &tp->flags))
- return;
-
rxdy_gated_en(tp, true);
r8153_teredo_off(tp);
@@ -2560,7 +2558,7 @@ static void r8153_enter_oob(struct r8152 *tp)
ocp_data &= ~NOW_IS_OOB;
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
- rtl8152_disable(tp);
+ rtl_disable(tp);
for (i = 0; i < 1000; i++) {
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
@@ -2624,6 +2622,13 @@ static void r8153_enable_aldps(struct r8152 *tp)
ocp_reg_write(tp, OCP_POWER_CFG, data);
}
+static void rtl8153_disable(struct r8152 *tp)
+{
+ r8153_disable_aldps(tp);
+ rtl_disable(tp);
+ r8153_enable_aldps(tp);
+}
+
static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8
duplex)
{
u16 bmcr, anar, gbcr;
@@ -2714,6 +2719,16 @@ out:
return ret;
}
+static void rtl8152_up(struct r8152 *tp)
+{
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return;
+
+ r8152b_disable_aldps(tp);
+ r8152b_exit_oob(tp);
+ r8152b_enable_aldps(tp);
+}
+
static void rtl8152_down(struct r8152 *tp)
{
if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
@@ -2727,6 +2742,16 @@ static void rtl8152_down(struct r8152 *tp)
r8152b_enable_aldps(tp);
}
+static void rtl8153_up(struct r8152 *tp)
+{
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return;
+
+ r8153_disable_aldps(tp);
+ r8153_first_init(tp);
+ r8153_enable_aldps(tp);
+}
+
static void rtl8153_down(struct r8152 *tp)
{
if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
@@ -2946,6 +2971,8 @@ static void r8152b_init(struct r8152 *tp)
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return;
+ r8152b_disable_aldps(tp);
+
if (tp->version == RTL_VER_01) {
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
ocp_data &= ~LED_MODE_MASK;
@@ -2984,6 +3011,7 @@ static void r8153_init(struct r8152 *tp)
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return;
+ r8153_disable_aldps(tp);
r8153_u1u2en(tp, false);
for (i = 0; i < 500; i++) {
@@ -3392,7 +3420,7 @@ static int rtl_ops_init(struct r8152 *tp, const struct
usb_device_id *id)
ops->init = r8152b_init;
ops->enable = rtl8152_enable;
ops->disable = rtl8152_disable;
- ops->up = r8152b_exit_oob;
+ ops->up = rtl8152_up;
ops->down = rtl8152_down;
ops->unload = rtl8152_unload;
ret = 0;
@@ -3400,8 +3428,8 @@ static int rtl_ops_init(struct r8152 *tp, const struct
usb_device_id *id)
case PRODUCT_ID_RTL8153:
ops->init = r8153_init;
ops->enable = rtl8153_enable;
- ops->disable = rtl8152_disable;
- ops->up = r8153_first_init;
+ ops->disable = rtl8153_disable;
+ ops->up = rtl8153_up;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
ret = 0;
@@ -3416,8 +3444,8 @@ static int rtl_ops_init(struct r8152 *tp, const struct
usb_device_id *id)
case PRODUCT_ID_SAMSUNG:
ops->init = r8153_init;
ops->enable = rtl8153_enable;
- ops->disable = rtl8152_disable;
- ops->up = r8153_first_init;
+ ops->disable = rtl8153_disable;
+ ops->up = rtl8153_up;
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
ret = 0;
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
