Hi Ivan,

On Thursday 18 September 2014 06:45 PM, Ivan T. Ivanov wrote:
> The current ADC is peripheral of Qualcomm SPMI PMIC chips. It has
> 16 bits resolution and register space inside PMIC accessible across
> SPMI bus.
> 
> The driver registers itself through IIO interface.
> 
> Signed-off-by: Ivan T. Ivanov <iiva...@mm-sol.com>
> ---
>  .../devicetree/bindings/iio/adc/qcom,spmi-iadc.txt |  61 ++

<snip>

> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 11b048a..77274e4 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -279,4 +279,15 @@ config XILINX_XADC
>         The driver can also be build as a module. If so, the module will be 
> called
>         xilinx-xadc.
>  
> +config QCOM_SPMI_IADC
> +     tristate "Qualcomm SPMI PMIC current ADC"
> +     select REGMAP_SPMI
> +     depends on IIO

May be you need to add "SPMI" in depends on because without enabling that it 
breaks.

> +     help
> +       This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip.
> +
> +       The driver supports single mode operation to read from upto seven 
> channel
> +       configuration that include reading the external/internal Rsense, 
> CSP_EX,
> +       CSN_EX pair along with the gain and offset calibration.
> +
>  endmenu

<snip>

> +
> +     return iadc_write(iadc, IADC_EN_CTL1, data);
> +}
> +
> +static void iadc_status_show(struct iadc_chip *iadc)
> +{
> +     u8 mode, sta1, chan, dig, en, req;

During compilation, getting a waring as below for all variables,

rivers/iio/adc/qcom-spmi-iadc.c: In function ‘iadc_poll_wait_eoc’:
drivers/iio/adc/qcom-spmi-iadc.c:227:10: warning: ‘en’ may be used 
uninitialized in this function [-Wmaybe-uninitialized]
  dev_warn(iadc->dev,
          ^

> +     int ret;
> +
> +     ret = iadc_read(iadc, IADC_MODE_CTL, &mode);
> +     if (ret < 0)
> +             return;
> +
> +     ret = iadc_read(iadc, IADC_DIG_PARAM, &dig);

Thanks,
--Kiran

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to