On 22/09/2014 at 11:10:54 +0200, Boris Brezillon wrote :
> The GPBR registers are not part of the RTT block and thus should not be
> defined in the reg property of the rtt node.
> 
> Use syscon to provide a proper DT representation and reference the GPBR
> syscon device in a new "atmel,time-reg" property which store both the
> syscon device phandle and the register offset within the GPBR block.
> 
> When using non DT boards, we won't be able to retrieve the syscon regmap,
> hence we need to create our own regmap using the memory region defined
> in the 2nd memory resource assigned to the RTT platform device.
> 
> Signed-off-by: Boris BREZILLON <boris.brezil...@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>

> ---
>  drivers/rtc/Kconfig        |  1 +
>  drivers/rtc/rtc-at91sam9.c | 64 
> +++++++++++++++++++++++++++++++++++++++-------
>  2 files changed, 56 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index a168e96..7d76da8 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1081,6 +1081,7 @@ config RTC_DRV_AT91RM9200
>  config RTC_DRV_AT91SAM9
>       tristate "AT91SAM9x/AT91CAP9 RTT as RTC"
>       depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
> +     select MFD_SYSCON
>       help
>         RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
>         (Real Time Timer). These timers are powered by the backup power
> diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
> index d72c34d..902cd01 100644
> --- a/drivers/rtc/rtc-at91sam9.c
> +++ b/drivers/rtc/rtc-at91sam9.c
> @@ -21,6 +21,8 @@
>  #include <linux/slab.h>
>  #include <linux/platform_data/atmel.h>
>  #include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
>  
>  /*
>   * This driver uses two configurable hardware resources that live in the
> @@ -72,7 +74,8 @@ struct sam9_rtc {
>       void __iomem            *rtt;
>       struct rtc_device       *rtcdev;
>       u32                     imr;
> -     void __iomem            *gpbr;
> +     struct regmap           *gpbr;
> +     unsigned int            gpbr_offset;
>       int                     irq;
>  };
>  
> @@ -81,10 +84,19 @@ struct sam9_rtc {
>  #define rtt_writel(rtc, field, val) \
>       writel((val), (rtc)->rtt + AT91_RTT_ ## field)
>  
> -#define gpbr_readl(rtc) \
> -     readl((rtc)->gpbr)
> -#define gpbr_writel(rtc, val) \
> -     writel((val), (rtc)->gpbr)
> +static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
> +{
> +     unsigned int val;
> +
> +     regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
> +
> +     return val;
> +}
> +
> +static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
> +{
> +     regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
> +}
>  
>  /*
>   * Read current time and date in RTC
> @@ -301,6 +313,12 @@ static const struct rtc_class_ops at91_rtc_ops = {
>       .alarm_irq_enable = at91_rtc_alarm_irq_enable,
>  };
>  
> +static struct regmap_config gpbr_regmap_config = {
> +     .reg_bits = 32,
> +     .val_bits = 32,
> +     .reg_stride = 4,
> +};
> +
>  /*
>   * Initialize and install RTC driver
>   */
> @@ -334,10 +352,38 @@ static int at91_rtc_probe(struct platform_device *pdev)
>       if (IS_ERR(rtc->rtt))
>               return PTR_ERR(rtc->rtt);
>  
> -     r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> -     rtc->gpbr = devm_ioremap_resource(&pdev->dev, r);
> -     if (IS_ERR(rtc->gpbr))
> -             return PTR_ERR(rtc->rtt);
> +     if (!pdev->dev.of_node) {
> +             /*
> +              * TODO: Remove this code chunk when when removing non DT
> +              * board support. Remember to remove the gpbr_regmap_config
> +              * variable too.
> +              */
> +             void __iomem *gpbr;
> +
> +             r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +             gpbr = devm_ioremap_resource(&pdev->dev, r);
> +             if (IS_ERR(gpbr))
> +                     return PTR_ERR(gpbr);
> +
> +             rtc->gpbr = regmap_init_mmio(NULL, gpbr,
> +                                          &gpbr_regmap_config);
> +     } else {
> +             struct of_phandle_args args;
> +
> +             ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
> +                                             "atmel,rtt-rtc-time-reg", 1, 0,
> +                                             &args);
> +             if (ret)
> +                     return ret;
> +
> +             rtc->gpbr = syscon_node_to_regmap(args.np);
> +             rtc->gpbr_offset = args.args[0];
> +     }
> +
> +     if (IS_ERR(rtc->gpbr)) {
> +             dev_err(&pdev->dev, "failed to retrieve gpbr regmap, 
> aborting.\n");
> +             return -ENOMEM;
> +     }
>  
>       mr = rtt_readl(rtc, MR);
>  
> -- 
> 1.9.1
> 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to