On Tue, 2014-10-07 at 21:28 +0200, Grozdan wrote: > Hi, > > Basically, my problem is this: > > I'm doing a lot of audio/video encoding on an AMD FX8350. The encoder > process always runs at nice 10. Even so, my whole system feels very > sluggish. Switching between different app windows and/or virtual > desktops takes up usually 3-5 seconds giving the impression that there > is not enough processing power. Browsing the web is also severely > impacted. > > I had to tune CFS in order to be (much) more responsive during an > encoding session. This has worked out pretty well thus far, but it is > my opinion that the user should *not* need to fiddle with buttons to > make his system respond fluently even under high load. The below is > what I had to do in order to get a snappy system during such load
You shouldn't have to do any CFS twiddling. I kinda doubt it's the CPU scheduler, would be more inclined to suspect mm/IO. You could try the BFQ IO scheduler, that showed some promise on my little box when doing hefty IO to my single speck of spinning rust. If you want to try it, and can't find it, I can send you a quilt tarball to plug into 3.16.4. > kernel.sched_nr_migrate = 64 > kernel.sched_latency_ns = 65000000 > kernel.sched_wakeup_granularity_ns = 100000 100us... that's a bad idea. > kernel.sched_min_granularity_ns = 100000 As is that, you'll likely be better off un-twiddling knobs. > kernel.sched_migration_cost_ns = 7000000 > > I have tried 3 different kernels, including one compiled myself, but > the results are the same > Kernels I tried were: 3.11.10, 3.12 and 3.16.4 (self-compiled) > > My system specs are as follows > > CPU: AMD FX-8350 @ 4GHz > RAM: 16GB DDR1333 > GPU: NVIDIA GTX 560 with NV blob driver Not that I think NV is to blame, but you should probably try reproducing the interactivity problem without that binary blob. It's suspect just for being a proprietary black hole, the perfect target to blame for all your open source kernel woes ;-) What are you encoding with what tools? What does vmstat 1 look like while box is working hard? (With stock scheduler knobs I mean, and just a few seconds) Posting something easily reproducible (do this with that tool) may help too. -Mike -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
