Signed-off-by: Jia He <hejia...@gmail.com>
This fixes all coding style error problems at rtl8188eu which
makes checkpatch.pl unhappy
---
drivers/staging/rtl8188eu/hal/bb_cfg.c | 4 ++--
drivers/staging/rtl8188eu/hal/fw.c | 4 ++--
drivers/staging/rtl8188eu/hal/phy.c | 2 +-
drivers/staging/rtl8188eu/hal/rf.c | 4 ++--
drivers/staging/rtl8188eu/hal/rf_cfg.c | 4 ++--
5 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/bb_cfg.c
b/drivers/staging/rtl8188eu/hal/bb_cfg.c
index 80e8cc9..3743a72 100644
--- a/drivers/staging/rtl8188eu/hal/bb_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/bb_cfg.c
@@ -173,7 +173,7 @@ static bool set_baseband_agc_config(struct adapter *adapt)
u32 v1 = array[i];
u32 v2 = array[i+1];
- if (v1 < 0xCDCDCDCD){
+ if (v1 < 0xCDCDCDCD) {
phy_set_bb_reg(adapt, v1, bMaskDWord, v2);
udelay(1);
}
@@ -552,7 +552,7 @@ static void store_pwrindex_offset(struct adapter *Adapter,
u32 regaddr, u32 bitm
}
}
-static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask ,u32
data)
+static void rtl_addr_delay(struct adapter *adapt, u32 addr, u32 bit_mask , u32
data)
{
if (addr == 0xfe) {
msleep(50);
diff --git a/drivers/staging/rtl8188eu/hal/fw.c
b/drivers/staging/rtl8188eu/hal/fw.c
index 17b7f37..d6efd54 100644
--- a/drivers/staging/rtl8188eu/hal/fw.c
+++ b/drivers/staging/rtl8188eu/hal/fw.c
@@ -193,13 +193,13 @@ int rtl88eu_download_fw(struct adapter *adapt)
u32 fwsize;
int err;
- if (request_firmware(&fw, fw_name, device)){
+ if (request_firmware(&fw, fw_name, device)) {
dev_err(device, "Firmware %s not available\n", fw_name);
return -ENOENT;
}
if (fw->size > FW_8188E_SIZE) {
- dev_err(device,"Firmware size exceed 0x%X. Check it.\n",
+ dev_err(device, "Firmware size exceed 0x%X. Check it.\n",
FW_8188E_SIZE);
return -1;
}
diff --git a/drivers/staging/rtl8188eu/hal/phy.c
b/drivers/staging/rtl8188eu/hal/phy.c
index c4f7f35..3f663fe 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -478,7 +478,7 @@ void
rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
/* 2.4G, decrease power */
{0, 0, 2, 3, 4, 4, 5, 6, 7, 7, 8, 9, 10, 10, 11},
/* 2.4G, increase power */
- {0, 0, -1, -2, -3, -4,-4, -4, -4, -5, -7, -8,-9, -9, -10},
+ {0, 0, -1, -2, -3, -4, -4, -4, -4, -5, -7, -8, -9, -9, -10},
};
u8 thermal_mapping[2][index_mapping_NUM_88E] = {
/* 2.4G, decrease power */
diff --git a/drivers/staging/rtl8188eu/hal/rf.c
b/drivers/staging/rtl8188eu/hal/rf.c
index c2fac34..8e7a0b1 100644
--- a/drivers/staging/rtl8188eu/hal/rf.c
+++ b/drivers/staging/rtl8188eu/hal/rf.c
@@ -102,7 +102,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter
*adapt, u8 *powerlevel)
}
}
rtl88eu_dm_txpower_track_adjust(&hal_data->odmpriv, 1, &direction,
- &pwrtrac_value);
+ &pwrtrac_value);
if (direction == 1) {
/* Increase TX power */
@@ -131,7 +131,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter
*adapt, u8 *powerlevel)
/* powerbase1 for HT MCS rates */
static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
u8 *pwr_level_bw20, u8 *pwr_level_bw40,
- u8 channel,u32 *ofdmbase, u32 *mcs_base)
+ u8 channel, u32 *ofdmbase, u32 *mcs_base)
{
struct hal_data_8188e *hal_data = GET_HAL_DATA(adapt);
u32 powerbase0, powerbase1;
diff --git a/drivers/staging/rtl8188eu/hal/rf_cfg.c
b/drivers/staging/rtl8188eu/hal/rf_cfg.c
index ddc2f55..5dc11ca 100644
--- a/drivers/staging/rtl8188eu/hal/rf_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/rf_cfg.c
@@ -164,7 +164,7 @@ do {
\
#define B3WIREDATALENGTH 0x800
#define BRFSI_RFENV 0x10
-static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path
rfpath,u32 addr, u32 mask, u32 data)
+static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath,
u32 addr, u32 mask, u32 data)
{
if (addr == 0xfe) {
mdelay(50);
@@ -190,7 +190,7 @@ static void rtl8188e_config_rf_reg(struct adapter *adapt,
u32 content = 0x1000; /*RF Content: radio_a_txt*/
u32 maskforphyset = (u32)(content & 0xE000);
- rtl_rfreg_delay(adapt, RF90_PATH_A, addr| maskforphyset,
+ rtl_rfreg_delay(adapt, RF90_PATH_A, addr | maskforphyset,
RFREG_OFFSET_MASK,
data);
}
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
