SA-11x0 platform used the same IP block as was used on PXA. Consequently it makes sense to have only one driver. Enable pxa_timer clocksource for StrongARM platform.
Signed-off-by: Dmitry Eremin-Solenikov <[email protected]> --- drivers/clocksource/Kconfig | 6 ++++++ drivers/clocksource/Makefile | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index cfd6519..fd99b08 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -216,4 +216,10 @@ config CLKSRC_VERSATILE ARM Versatile, RealView and Versatile Express reference platforms. +config CLKSRC_PXA + def_bool y if ARCH_PXA || ARCH_SA1100 + help + This enables OST0 support available on PXA and SA-11x0 + platforms. + endmenu diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 7fd9fd1..6d9822e 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clps711x-timer.o obj-$(CONFIG_ARCH_MARCO) += timer-marco.o obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o obj-$(CONFIG_ARCH_MXS) += mxs_timer.o -obj-$(CONFIG_ARCH_PXA) += pxa_timer.o +obj-$(CONFIG_CLKSRC_PXA) += pxa_timer.o obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o obj-$(CONFIG_ARCH_U300) += timer-u300.o obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
