ChangeSet 1.2181.16.8, 2005/03/17 13:50:00-08:00, [EMAIL PROTECTED]
[PATCH] PCI: trivial DBG tidy-up
Tidy-up a bunch of PCI DBG output to use pci_name() when possible,
add domain when appropriate, remove redundancy, settle on one
style (DBG vs DBGC), etc.
Signed-off-by: Bjorn Helgaas <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
drivers/pci/hotplug.c | 10 ++++------
drivers/pci/probe.c | 13 +++++++------
drivers/pci/setup-bus.c | 25 ++++++++++++-------------
drivers/pci/setup-irq.c | 8 ++++----
drivers/pci/setup-res.c | 14 +++++++-------
5 files changed, 34 insertions(+), 36 deletions(-)
diff -Nru a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
--- a/drivers/pci/hotplug.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/hotplug.c 2005-04-01 15:37:39 -08:00
@@ -71,7 +71,8 @@
struct pci_dev_wrapped wrapped_dev;
int result = 0;
- DBG("scanning bus %02x\n", wrapped_bus->bus->number);
+ DBG("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(wrapped_bus->bus),
+ wrapped_bus->bus->number);
if (fn->pre_visit_pci_bus) {
result = fn->pre_visit_pci_bus(wrapped_bus, wrapped_parent);
@@ -106,8 +107,7 @@
struct pci_bus_wrapped wrapped_bus;
int result = 0;
- DBG("scanning bridge %02x, %02x\n", PCI_SLOT(wrapped_dev->dev->devfn),
- PCI_FUNC(wrapped_dev->dev->devfn));
+ DBG("PCI: Scanning bridge %s\n", pci_name(wrapped_dev->dev));
if (fn->visit_pci_dev) {
result = fn->visit_pci_dev(wrapped_dev, wrapped_parent);
@@ -153,8 +153,7 @@
return result;
break;
default:
- DBG("scanning device %02x, %02x\n",
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ DBG("PCI: Scanning device %s\n", pci_name(dev));
if (fn->visit_pci_dev) {
result = fn->visit_pci_dev (wrapped_dev,
wrapped_parent);
@@ -169,4 +168,3 @@
return result;
}
EXPORT_SYMBOL(pci_visit_dev);
-
diff -Nru a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/probe.c 2005-04-01 15:37:39 -08:00
@@ -422,7 +422,7 @@
pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
- DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n",
+ DBG("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
pci_name(dev), buses & 0xffffff, pass);
/* Disable MasterAbortMode during probing to avoid reporting
@@ -559,8 +559,8 @@
dev->class = class;
class >>= 8;
- DBG("Found %02x:%02x [%04x/%04x] %06x %02x\n", dev->bus->number,
- dev->devfn, dev->vendor, dev->device, class, dev->hdr_type);
+ DBG("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
+ dev->vendor, dev->device, class, dev->hdr_type);
/* "Unknown power state" */
dev->current_state = 4;
@@ -815,7 +815,7 @@
unsigned int devfn, pass, max = bus->secondary;
struct pci_dev *dev;
- DBG("Scanning bus %02x\n", bus->number);
+ DBG("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
/* Go find them, Rover! */
for (devfn = 0; devfn < 0x100; devfn += 8)
@@ -825,7 +825,7 @@
* After performing arch-dependent fixup of the bus, look behind
* all PCI-to-PCI bridges on this bus.
*/
- DBG("Fixups for bus %02x\n", bus->number);
+ DBG("PCI: Fixups for bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
pcibios_fixup_bus(bus);
for (pass=0; pass < 2; pass++)
list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -841,7 +841,8 @@
*
* Return how far we've got finding sub-buses.
*/
- DBG("Bus scan for %02x returning with max=%02x\n", bus->number, max);
+ DBG("PCI: Bus scan for %04x:%02x returning with max=%02x\n",
+ pci_domain_nr(bus), bus->number, max);
return max;
}
diff -Nru a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
--- a/drivers/pci/setup-bus.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/setup-bus.c 2005-04-01 15:37:39 -08:00
@@ -29,9 +29,9 @@
#define DEBUG_CONFIG 1
#if DEBUG_CONFIG
-# define DBGC(args) printk args
+#define DBG(x...) printk(x)
#else
-# define DBGC(args)
+#define DBG(x...)
#endif
#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
@@ -151,8 +151,7 @@
struct pci_bus_region region;
u32 l, io_upper16;
- DBGC((KERN_INFO "PCI: Bus %d, bridge: %s\n",
- bus->number, pci_name(bridge)));
+ DBG(KERN_INFO "PCI: Bridge: %s\n", pci_name(bridge));
/* Set up the top and bottom of the PCI I/O segment for this bus. */
pcibios_resource_to_bus(bridge, ®ion, bus->resource[0]);
@@ -163,14 +162,14 @@
l |= region.end & 0xf000;
/* Set up upper 16 bits of I/O base/limit. */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
- DBGC((KERN_INFO " IO window: %04lx-%04lx\n",
- region.start, region.end));
+ DBG(KERN_INFO " IO window: %04lx-%04lx\n",
+ region.start, region.end);
}
else {
/* Clear upper 16 bits of I/O base/limit. */
io_upper16 = 0;
l = 0x00f0;
- DBGC((KERN_INFO " IO window: disabled.\n"));
+ DBG(KERN_INFO " IO window: disabled.\n");
}
/* Temporarily disable the I/O range before updating PCI_IO_BASE. */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
@@ -185,12 +184,12 @@
if (bus->resource[1]->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
- DBGC((KERN_INFO " MEM window: %08lx-%08lx\n",
- region.start, region.end));
+ DBG(KERN_INFO " MEM window: %08lx-%08lx\n",
+ region.start, region.end);
}
else {
l = 0x0000fff0;
- DBGC((KERN_INFO " MEM window: disabled.\n"));
+ DBG(KERN_INFO " MEM window: disabled.\n");
}
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
@@ -204,12 +203,12 @@
if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
- DBGC((KERN_INFO " PREFETCH window: %08lx-%08lx\n",
- region.start, region.end));
+ DBG(KERN_INFO " PREFETCH window: %08lx-%08lx\n",
+ region.start, region.end);
}
else {
l = 0x0000fff0;
- DBGC((KERN_INFO " PREFETCH window: disabled.\n"));
+ DBG(KERN_INFO " PREFETCH window: disabled.\n");
}
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
diff -Nru a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c
--- a/drivers/pci/setup-irq.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/setup-irq.c 2005-04-01 15:37:39 -08:00
@@ -20,9 +20,9 @@
#define DEBUG_CONFIG 0
#if DEBUG_CONFIG
-# define DBGC(args) printk args
+#define DBG(x...) printk(x)
#else
-# define DBGC(args)
+#define DBG(x...)
#endif
@@ -53,8 +53,8 @@
irq = 0;
dev->irq = irq;
- DBGC((KERN_ERR "PCI fixup irq: (%s) got %d\n",
- dev->dev.kobj.name, dev->irq));
+ DBG(KERN_ERR "PCI: fixup irq: (%s) got %d\n",
+ dev->dev.kobj.name, dev->irq);
/* Always tell the device, so the driver knows what is
the real IRQ to use; the device does not use it. */
diff -Nru a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
--- a/drivers/pci/setup-res.c 2005-04-01 15:37:39 -08:00
+++ b/drivers/pci/setup-res.c 2005-04-01 15:37:39 -08:00
@@ -27,9 +27,9 @@
#define DEBUG_CONFIG 0
#if DEBUG_CONFIG
-# define DBGC(args) printk args
+#define DBG(x...) printk(x)
#else
-# define DBGC(args)
+#define DBG(x...)
#endif
@@ -42,10 +42,10 @@
pcibios_resource_to_bus(dev, ®ion, res);
- DBGC((KERN_ERR " got res [%lx:%lx] bus [%lx:%lx] flags %lx for "
+ DBG(KERN_ERR " got res [%lx:%lx] bus [%lx:%lx] flags %lx for "
"BAR %d of %s\n", res->start, res->end,
region.start, region.end, res->flags,
- resno, pci_name(dev)));
+ resno, pci_name(dev));
new = region.start | (res->flags & PCI_REGION_FLAG_MASK);
if (res->flags & IORESOURCE_IO)
@@ -60,7 +60,7 @@
reg = dev->rom_base_reg;
} else {
/* Hmm, non-standard resource. */
- BUG();
+
return; /* kill uninitialised var warning */
}
@@ -85,9 +85,9 @@
}
}
res->flags &= ~IORESOURCE_UNSET;
- DBGC((KERN_INFO "PCI: moved device %s resource %d (%lx) to %x\n",
+ DBG(KERN_INFO "PCI: moved device %s resource %d (%lx) to %x\n",
pci_name(dev), resno, res->flags,
- new & ~PCI_REGION_FLAG_MASK));
+ new & ~PCI_REGION_FLAG_MASK);
}
int __devinit
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
