Hi Greg, 2014-10-10 10:10 GMT+02:00 Matthias Brugger <[email protected]>: > 2014-10-09 23:52 GMT+02:00 Greg KH <[email protected]>: >> On Thu, Oct 09, 2014 at 06:23:31PM +0200, Matthias Brugger wrote: >>> The calculation of value quot for highspeed register set to three >>> was wrong. This patch fixes the calculation so that the serial port >>> for baudrates bigger then 576000 baud is working correctly. >>> >>> Signed-off-by: Matthias Brugger <[email protected]> >>> --- >>> drivers/tty/serial/8250/8250_mtk.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/tty/serial/8250/8250_mtk.c >>> b/drivers/tty/serial/8250/8250_mtk.c >>> index 1c4b4bf..4376c48 100644 >>> --- a/drivers/tty/serial/8250/8250_mtk.c >>> +++ b/drivers/tty/serial/8250/8250_mtk.c >>> @@ -81,7 +81,7 @@ mtk8250_set_termios(struct uart_port *port, struct >>> ktermios *termios, >>> /* Set to highest baudrate supported */ >>> if (baud >= 1152000) >>> baud = 921600; >>> - quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud); >>> + quot = (port->uartclk / (256 * baud)) + 1; >>> } >>> >>> /* >> >> Has this always been incorrect, or was it caused by a specific patch? > > It has always been incorrect :o > >> Should it go to the stable kernels? If so, how far back? > > No need to go to the stable kernels. The driver is only in linux-next.
Any comments on that? Thanks, Matthias > > Cheers, > Matthias Brugger > >> >> thanks, >> >> greg k-h > > > > -- > motzblog.wordpress.com -- motzblog.wordpress.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
