On Mar 26, 2005 7:32 PM, Marcin Dalecki <[EMAIL PROTECTED]> wrote: > > On 2005-03-26, at 16:19, Arjan van de Ven wrote: > > > ` > >> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > >> hda: dma_intr: error=0x84 { DriveStatusError BadCRC > > > > BadCRC is 99% sure a cabling issue; either a bad/overheated cable or a > > cable used at too high a speed for the cable. > > No. It is more likely that the timing programming between the disk and > host controller > are in a miss-match state. UDMA mode detection can come in to mind too. > It makes sense to experiment with hdparm to see if the problem goes > away in non > Ultra DMA modes.
Do you mean "multiword dma modes" or "pio modes" ? -- Julien - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/