We are going to have more pinctrl drivers for Intel hardware so separate
all our pin controller drivers to own directory.
Signed-off-by: Mika Westerberg <mika.westerb...@linux.intel.com>
---
Mathias, can you ACK this if you are happy with the change?
drivers/pinctrl/Kconfig | 13 +------------
drivers/pinctrl/Makefile | 2 +-
drivers/pinctrl/intel/Kconfig | 15 +++++++++++++++
drivers/pinctrl/intel/Makefile | 3 +++
drivers/pinctrl/{ => intel}/pinctrl-baytrail.c | 0
5 files changed, 20 insertions(+), 13 deletions(-)
create mode 100644 drivers/pinctrl/intel/Kconfig
create mode 100644 drivers/pinctrl/intel/Makefile
rename drivers/pinctrl/{ => intel}/pinctrl-baytrail.c (100%)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index c6a66de6ed72..d014f22f387a 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -67,18 +67,6 @@ config PINCTRL_AT91
help
Say Y here to enable the at91 pinctrl driver
-config PINCTRL_BAYTRAIL
- bool "Intel Baytrail GPIO pin control"
- depends on GPIOLIB && ACPI && X86
- select GPIOLIB_IRQCHIP
- help
- driver for memory mapped GPIO functionality on Intel Baytrail
- platforms. Supports 3 banks with 102, 28 and 44 gpios.
- Most pins are usually muxed to some other functionality by firmware,
- so only a small amount is available for gpio use.
-
- Requires ACPI device enumeration code to set up a platform device.
-
config PINCTRL_BCM2835
bool
select PINMUX
@@ -205,6 +193,7 @@ config PINCTRL_PALMAS
source "drivers/pinctrl/berlin/Kconfig"
source "drivers/pinctrl/freescale/Kconfig"
+source "drivers/pinctrl/intel/Kconfig"
source "drivers/pinctrl/mvebu/Kconfig"
source "drivers/pinctrl/nomadik/Kconfig"
source "drivers/pinctrl/qcom/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 51f52d32859e..c030b3db8034 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o
obj-$(CONFIG_PINCTRL_BF60x) += pinctrl-adi2-bf60x.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
-obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
@@ -39,6 +38,7 @@ obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-y += freescale/
+obj-$(CONFIG_X86) += intel/
obj-$(CONFIG_PLAT_ORION) += mvebu/
obj-y += nomadik/
obj-$(CONFIG_ARCH_QCOM) += qcom/
diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig
new file mode 100644
index 000000000000..957c90386307
--- /dev/null
+++ b/drivers/pinctrl/intel/Kconfig
@@ -0,0 +1,15 @@
+#
+# Intel pin control drivers
+#
+
+config PINCTRL_BAYTRAIL
+ bool "Intel Baytrail GPIO pin control"
+ depends on GPIOLIB && ACPI
+ select GPIOLIB_IRQCHIP
+ help
+ driver for memory mapped GPIO functionality on Intel Baytrail
+ platforms. Supports 3 banks with 102, 28 and 44 gpios.
+ Most pins are usually muxed to some other functionality by firmware,
+ so only a small amount is available for gpio use.
+
+ Requires ACPI device enumeration code to set up a platform device.
diff --git a/drivers/pinctrl/intel/Makefile b/drivers/pinctrl/intel/Makefile
new file mode 100644
index 000000000000..d049b769e327
--- /dev/null
+++ b/drivers/pinctrl/intel/Makefile
@@ -0,0 +1,3 @@
+# Intel pin control drivers
+
+obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o
diff --git a/drivers/pinctrl/pinctrl-baytrail.c
b/drivers/pinctrl/intel/pinctrl-baytrail.c
similarity index 100%
rename from drivers/pinctrl/pinctrl-baytrail.c
rename to drivers/pinctrl/intel/pinctrl-baytrail.c
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
