Ooops! I selected the wrong file to attach. Here is the proper syslog attachment...
/var/log/messages: Apr 3 13:07:04 localhost kernel: .swsusp: Restoring Highmem Apr 3 13:07:04 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9 Apr 3 13:07:06 localhost kernel: ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI Apr 3 13:07:07 localhost kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9 Apr 3 13:07:09 localhost kernel: ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 9 (level, low) -> IRQ 9 Apr 3 13:07:09 localhost kernel: Restarting tasks... done Apr 3 13:07:09 localhost kernel: eth1: New link status: Connected (0001) Apr 3 13:07:10 localhost kernel: usb 3-1: USB disconnect, address 2 Apr 3 13:07:10 localhost kernel: sda : READ CAPACITY failed. Apr 3 13:07:10 localhost kernel: sda : status=0, message=00, host=1, driver=00 Apr 3 13:07:10 localhost kernel: sda : sense not available. Apr 3 13:07:10 localhost kernel: sda: Write Protect is off Apr 3 13:07:10 localhost kernel: sda: assuming drive cache: write through Apr 3 13:07:10 localhost kernel: sda : READ CAPACITY failed. Apr 3 13:07:10 localhost kernel: sda : status=0, message=00, host=1, driver=00 Apr 3 13:07:10 localhost kernel: sda : sense not available. Apr 3 13:07:10 localhost kernel: sda: Write Protect is off Apr 3 13:07:10 localhost kernel: sda: assuming drive cache: write through Apr 3 13:07:10 localhost kernel: sda:<3>scsi0 (0:0): rejecting I/O to device being removed Apr 3 13:07:10 localhost kernel: Buffer I/O error on device sda, logical block 0 Apr 3 13:07:10 localhost kernel: scsi0 (0:0): rejecting I/O to device being removed Apr 3 13:07:10 localhost kernel: Buffer I/O error on device sda, logical block 0 Apr 3 13:07:10 localhost kernel: scsi0 (0:0): rejecting I/O to device being removed Apr 3 13:07:10 localhost kernel: Buffer I/O error on device sda, logical block 0 Apr 3 13:07:10 localhost kernel: unable to read partition table Apr 3 13:07:10 localhost kernel: usb 3-1: new full speed USB device using uhci_hcd and address 3 Apr 3 13:07:12 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed out Apr 3 13:07:12 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0, TXCOMPLFID=00bf, EVSTAT=808b Apr 3 13:07:15 localhost kernel: eth1: New link status: Connected (0001) Apr 3 13:07:18 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed out Apr 3 13:07:18 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0, TXCOMPLFID=00bf, EVSTAT=808b Apr 3 13:07:25 localhost kernel: eth1: New link status: Connected (0001) Apr 3 13:07:25 localhost kernel: usb 3-1: 05-wait_for_sys timed out on ep0in Apr 3 13:07:25 localhost kernel: usb 3-1: khubd timed out on ep0in Apr 3 13:07:26 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed out Apr 3 13:07:26 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0, TXCOMPLFID=00bf, EVSTAT=808b Apr 3 13:07:30 localhost kernel: usb 3-1: khubd timed out on ep0in Apr 3 13:07:30 localhost kernel: usb 3-1: string descriptor 0 read error: -110 Apr 3 13:07:33 localhost NET: /sbin/dhclient-script : updated /etc/resolv.conf Apr 3 13:07:35 localhost kernel: usb 3-1: 05-wait_for_sys timed out on ep0in Apr 3 13:07:35 localhost hal.hotplug[8361]: timout(10000 ms) waiting for /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0 Apr 3 13:07:36 localhost hald[4527]: Timed out waiting for hotplug event 785. Rebasing to 786 Apr 3 13:07:40 localhost kernel: usb 3-1: khubd timed out on ep0in Apr 3 13:07:45 localhost kernel: usb 3-1: khubd timed out on ep0in Apr 3 13:07:45 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices Apr 3 13:07:45 localhost kernel: usb 3-1: 05-wait_for_sys timed out on ep0in Apr 3 13:07:55 localhost kernel: usb 3-1: hald timed out on ep0in Apr 3 13:08:10 localhost kernel: usb 3-1: hald timed out on ep0in Apr 3 13:08:10 localhost kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 3 Apr 3 13:08:30 localhost kernel: usb 3-1: hald timed out on ep0in Apr 3 13:08:35 localhost kernel: scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0 Apr 3 13:08:40 localhost kernel: usb 3-1: hald timed out on ep0in
