On Thu, Oct 16, 2014 at 7:11 PM, Soren Brinkmann <[email protected]> wrote:
> Add pinctrl descriptions to the zc702 and zc706 device trees. > > Signed-off-by: Soren Brinkmann <[email protected]> (...) > +&pinctrl0 { > + pinctrl_can0_default: pinctrl-can0-default { > + common { > + function = "can0"; > + groups = "can0_9_grp"; > + bias-pull-up = <0>; No. If you want pull-up, just use bias-pull-up; If you want to disable pull-up, use bias-disable; > + slew-rate = <0>; If this measure is any kind of time unit, this is against the laws of nature. > + io-standard = <1>; > + }; > + > + rx { > + pins = "MIO46"; > + bias-high-impedance = <1>; Just bias-high-impedance; > + }; > + > + tx { > + pins = "MIO47"; > + bias-high-impedance = <0>; Just bias-disable; Look all these over closely. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
