On Tue, Oct 28, 2014 at 5:03 PM, Sören Brinkmann <soren.brinkm...@xilinx.com> wrote: > On Tue, 2014-10-28 at 04:05PM +0100, Linus Walleij wrote: >> On Thu, Oct 16, 2014 at 7:11 PM, Soren Brinkmann >> <soren.brinkm...@xilinx.com> wrote: >> >> > Add pinctrl descriptions to the zc702 and zc706 device trees. >> > >> > Signed-off-by: Soren Brinkmann <soren.brinkm...@xilinx.com> >> >> (...) >> > +&pinctrl0 { >> > + pinctrl_can0_default: pinctrl-can0-default { >> > + common { >> > + function = "can0"; >> > + groups = "can0_9_grp"; >> > + bias-pull-up = <0>; >> >> No. If you want pull-up, just use >> bias-pull-up; >> >> If you want to disable pull-up, use >> bias-disable; > > But bias-disable also disables high-impedance. That doesn't work for me, > I think.
Hm. Some sequencing problem right? Like you count on bias-high-impdedance being set in some other state? I think each state should be self-contained, so you set all the stuff you need in a state, do not rely on things coming in pre-set from another state. So in this case just set bias-high-impedance; then and if the state does not have bias-pull-up, *always* disable it in the driver. >> >> > + slew-rate = <0>; >> >> If this measure is any kind of time unit, this is against the laws of nature. > > It's not. As the bindings say, the argument is driver specific. Okay then. >> > + rx { >> > + pins = "MIO46"; >> > + bias-high-impedance = <1>; >> >> Just >> bias-high-impedance; > > Same problem as I have above. To allow all permutations of pull-up and > tri-state I can't just have a single disable-bias property. Again it seems to be a sequencing problem. And device tree is not good at sequences, therefore all states should be self-contained. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/