> From: Kever Yang [mailto:[email protected]] On Behalf Of Kever Yang > Sent: Friday, October 31, 2014 7:03 AM > > This patch adds suspend/resume for dwc2 hcd controller. > > Signed-off-by: Kever Yang <[email protected]> > --- > > drivers/usb/dwc2/hcd.c | 74 > ++++++++++++++++++++++++++++++++++++++++++-------- > 1 file changed, 63 insertions(+), 11 deletions(-) > > diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c > index fa49c72..df68449 100644 > --- a/drivers/usb/dwc2/hcd.c > +++ b/drivers/usb/dwc2/hcd.c > @@ -1473,6 +1473,29 @@ static void dwc2_port_suspend(struct dwc2_hsotg > *hsotg, u16 windex) > } > } > > +static void dwc2_port_resume(struct dwc2_hsotg *hsotg) > +{ > + u32 hprt0; > + > + /* After clear the Stop PHY clock bit, we should wait for a moment > + * for PLL work stable with clock output. > + */ > + writel(0, hsotg->regs + PCGCTL); > + usleep_range(2000, 4000); > + > + hprt0 = dwc2_read_hprt0(hsotg); > + hprt0 |= HPRT0_RES; > + writel(hprt0, hsotg->regs + HPRT0); > + hprt0 &= ~HPRT0_SUSP; > + /* according to USB2.0 Spec 7.1.7.7, the host most send the resume > + * signal for at least 20ms > + */ > + usleep_range(20000, 25000); > + > + hprt0 &= ~HPRT0_RES; > + writel(hprt0, hsotg->regs + HPRT0); > +} > + > /* Handles hub class-specific requests */ > static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, > u16 wvalue, u16 windex, char *buf, u16 wlength) > @@ -1518,17 +1541,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg > *hsotg, u16 typereq, > case USB_PORT_FEAT_SUSPEND: > dev_dbg(hsotg->dev, > "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); > - writel(0, hsotg->regs + PCGCTL); > - usleep_range(20000, 40000); > - > - hprt0 = dwc2_read_hprt0(hsotg); > - hprt0 |= HPRT0_RES; > - writel(hprt0, hsotg->regs + HPRT0); > - hprt0 &= ~HPRT0_SUSP; > - usleep_range(100000, 150000); > - > - hprt0 &= ~HPRT0_RES; > - writel(hprt0, hsotg->regs + HPRT0); > + dwc2_port_resume(hsotg); > break; > > case USB_PORT_FEAT_POWER: > @@ -2301,6 +2314,42 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd) > usleep_range(1000, 3000); > } > > +static int _dwc2_hcd_suspend(struct usb_hcd *hcd) > +{ > + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); > + u32 hprt0; > + > + if (hsotg->op_state != OTG_STATE_B_HOST) > + return 0; > + > + if (hsotg->lx_state != DWC2_L0) > + return 0; > + > + hprt0 = dwc2_read_hprt0(hsotg); > + if (hprt0 & HPRT0_CONNSTS) > + dwc2_port_suspend(hsotg, 1); > + > + return 0; > +} > + > +static int _dwc2_hcd_resume(struct usb_hcd *hcd) > +{ > + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); > + u32 hprt0; > + > + if (hsotg->op_state != OTG_STATE_B_HOST) > + return 0; > + > + if (hsotg->lx_state != DWC2_L2) > + return 0; > + > + hprt0 = dwc2_read_hprt0(hsotg); > + if ((hprt0 | HPRT0_CONNSTS) && (hprt0 | HPRT0_SUSP))
This isn't right, the condition will always be true. Per your previous email, you are not able to test this because your platform does not support suspend/resume yet, is that right? I don't want to apply any untested patches to the driver. -- Paul -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
