Hi, This is second version of the patch series adding pinctrl/GPIO support for Intel Braswell and Cherrryview. The previous version can be found here:
https://lkml.org/lkml/2014/10/27/118 I've dropped patches [2/4] and [3/4] as they are already applied to the pinctrl tree. Changes to the previous version: [1/2] - Removed unnecessary cast and added Rafael's ACK. [2/2] - Use Ohms instead of kOhms in pin configuration. - Change chv_config_set_pull() to be not so convoluted. - Remove locking when we just read single register. This is not needed. - Use BIT() instead of (1 << something) Mika Westerberg (2): gpio / ACPI: Add knowledge about pin controllers to acpi_get_gpiod() pinctrl: Add Intel Cherryview/Braswell pin controller support drivers/gpio/gpiolib-acpi.c | 62 +- drivers/pinctrl/intel/Kconfig | 12 + drivers/pinctrl/intel/Makefile | 1 + drivers/pinctrl/intel/pinctrl-cherryview.c | 1519 ++++++++++++++++++++++++++++ 4 files changed, 1591 insertions(+), 3 deletions(-) create mode 100644 drivers/pinctrl/intel/pinctrl-cherryview.c -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
