On 28/10/2014 22:25, Maxime Ripard :
> Split the device_control callback of the Atmel HDMAC driver to make use
> of the newly introduced callbacks, that will eventually be used to retrieve
> slave capabilities.
> 
> Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>

It seems okay:

Acked-by: Nicolas Ferre <nicolas.fe...@atmel.com>

Thanks.

> ---
>  drivers/dma/at_hdmac.c | 121 
> +++++++++++++++++++++++++++++--------------------
>  1 file changed, 73 insertions(+), 48 deletions(-)
> 
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index ca9dd2613283..86450b3442f2 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -972,11 +972,13 @@ err_out:
>       return NULL;
>  }
>  
> -static int set_runtime_config(struct dma_chan *chan,
> -                           struct dma_slave_config *sconfig)
> +static int atc_config(struct dma_chan *chan,
> +                   struct dma_slave_config *sconfig)
>  {
>       struct at_dma_chan      *atchan = to_at_dma_chan(chan);
>  
> +     dev_vdbg(chan2dev(chan), "%s\n", __func__);
> +
>       /* Check if it is chan is configured for slave transfers */
>       if (!chan->private)
>               return -EINVAL;
> @@ -989,9 +991,28 @@ static int set_runtime_config(struct dma_chan *chan,
>       return 0;
>  }
>  
> +static int atc_pause(struct dma_chan *chan)
> +{
> +     struct at_dma_chan      *atchan = to_at_dma_chan(chan);
> +     struct at_dma           *atdma = to_at_dma(chan->device);
> +     int                     chan_id = atchan->chan_common.chan_id;
> +     unsigned long           flags;
>  
> -static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> -                    unsigned long arg)
> +     LIST_HEAD(list);
> +
> +     dev_vdbg(chan2dev(chan), "%s\n", __func__);
> +
> +     spin_lock_irqsave(&atchan->lock, flags);
> +
> +     dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id));
> +     set_bit(ATC_IS_PAUSED, &atchan->status);
> +
> +     spin_unlock_irqrestore(&atchan->lock, flags);
> +
> +     return 0;
> +}
> +
> +static int atc_resume(struct dma_chan *chan)
>  {
>       struct at_dma_chan      *atchan = to_at_dma_chan(chan);
>       struct at_dma           *atdma = to_at_dma(chan->device);
> @@ -1000,60 +1021,61 @@ static int atc_control(struct dma_chan *chan, enum 
> dma_ctrl_cmd cmd,
>  
>       LIST_HEAD(list);
>  
> -     dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd);
> +     dev_vdbg(chan2dev(chan), "%s\n", __func__);
>  
> -     if (cmd == DMA_PAUSE) {
> -             spin_lock_irqsave(&atchan->lock, flags);
> +     if (!atc_chan_is_paused(atchan))
> +             return 0;
>  
> -             dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id));
> -             set_bit(ATC_IS_PAUSED, &atchan->status);
> +     spin_lock_irqsave(&atchan->lock, flags);
>  
> -             spin_unlock_irqrestore(&atchan->lock, flags);
> -     } else if (cmd == DMA_RESUME) {
> -             if (!atc_chan_is_paused(atchan))
> -                     return 0;
> +     dma_writel(atdma, CHDR, AT_DMA_RES(chan_id));
> +     clear_bit(ATC_IS_PAUSED, &atchan->status);
>  
> -             spin_lock_irqsave(&atchan->lock, flags);
> +     spin_unlock_irqrestore(&atchan->lock, flags);
>  
> -             dma_writel(atdma, CHDR, AT_DMA_RES(chan_id));
> -             clear_bit(ATC_IS_PAUSED, &atchan->status);
> +     return 0;
> +}
>  
> -             spin_unlock_irqrestore(&atchan->lock, flags);
> -     } else if (cmd == DMA_TERMINATE_ALL) {
> -             struct at_desc  *desc, *_desc;
> -             /*
> -              * This is only called when something went wrong elsewhere, so
> -              * we don't really care about the data. Just disable the
> -              * channel. We still have to poll the channel enable bit due
> -              * to AHB/HSB limitations.
> -              */
> -             spin_lock_irqsave(&atchan->lock, flags);
> +static int atc_terminate_all(struct dma_chan *chan)
> +{
> +     struct at_dma_chan      *atchan = to_at_dma_chan(chan);
> +     struct at_dma           *atdma = to_at_dma(chan->device);
> +     int                     chan_id = atchan->chan_common.chan_id;
> +     struct at_desc          *desc, *_desc;
> +     unsigned long           flags;
>  
> -             /* disabling channel: must also remove suspend state */
> -             dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask);
> +     LIST_HEAD(list);
>  
> -             /* confirm that this channel is disabled */
> -             while (dma_readl(atdma, CHSR) & atchan->mask)
> -                     cpu_relax();
> +     dev_vdbg(chan2dev(chan), "%s\n", __func__);
>  
> -             /* active_list entries will end up before queued entries */
> -             list_splice_init(&atchan->queue, &list);
> -             list_splice_init(&atchan->active_list, &list);
> +     /*
> +      * This is only called when something went wrong elsewhere, so
> +      * we don't really care about the data. Just disable the
> +      * channel. We still have to poll the channel enable bit due
> +      * to AHB/HSB limitations.
> +      */
> +     spin_lock_irqsave(&atchan->lock, flags);
>  
> -             /* Flush all pending and queued descriptors */
> -             list_for_each_entry_safe(desc, _desc, &list, desc_node)
> -                     atc_chain_complete(atchan, desc);
> +     /* disabling channel: must also remove suspend state */
> +     dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask);
>  
> -             clear_bit(ATC_IS_PAUSED, &atchan->status);
> -             /* if channel dedicated to cyclic operations, free it */
> -             clear_bit(ATC_IS_CYCLIC, &atchan->status);
> +     /* confirm that this channel is disabled */
> +     while (dma_readl(atdma, CHSR) & atchan->mask)
> +             cpu_relax();
>  
> -             spin_unlock_irqrestore(&atchan->lock, flags);
> -     } else if (cmd == DMA_SLAVE_CONFIG) {
> -             return set_runtime_config(chan, (struct dma_slave_config *)arg);
> -     } else {
> -             return -ENXIO;
> -     }
> +     /* active_list entries will end up before queued entries */
> +     list_splice_init(&atchan->queue, &list);
> +     list_splice_init(&atchan->active_list, &list);
> +
> +     /* Flush all pending and queued descriptors */
> +     list_for_each_entry_safe(desc, _desc, &list, desc_node)
> +             atc_chain_complete(atchan, desc);
> +
> +     clear_bit(ATC_IS_PAUSED, &atchan->status);
> +     /* if channel dedicated to cyclic operations, free it */
> +     clear_bit(ATC_IS_CYCLIC, &atchan->status);
> +
> +     spin_unlock_irqrestore(&atchan->lock, flags);
>  
>       return 0;
>  }
> @@ -1505,7 +1527,10 @@ static int __init at_dma_probe(struct platform_device 
> *pdev)
>               /* controller can do slave DMA: can trigger cyclic transfers */
>               dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask);
>               atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic;
> -             atdma->dma_common.device_control = atc_control;
> +             atdma->dma_common.device_config = atc_config;
> +             atdma->dma_common.device_pause = atc_pause;
> +             atdma->dma_common.device_resume = atc_resume;
> +             atdma->dma_common.device_terminate_all = atc_terminate_all;
>       }
>  
>       dma_writel(atdma, EN, AT_DMA_ENABLE);
> @@ -1622,7 +1647,7 @@ static void atc_suspend_cyclic(struct at_dma_chan 
> *atchan)
>       if (!atc_chan_is_paused(atchan)) {
>               dev_warn(chan2dev(chan),
>               "cyclic channel not paused, should be done by channel user\n");
> -             atc_control(chan, DMA_PAUSE, 0);
> +             atc_pause(chan);
>       }
>  
>       /* now preserve additional data for cyclic operations */
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to