Signed-off-by: Ludovic <ludovic.tance...@maplehightech.com>
---
drivers/iio/pressure/Kconfig | 10 +
drivers/iio/pressure/Makefile | 1 +
drivers/iio/pressure/ms5637.c | 488 +++++++++++++++++++++
drivers/staging/iio/Documentation/pressure/ms5637 | 25 ++
4 files changed, 524 insertions(+)
create mode 100644 drivers/iio/pressure/ms5637.c
create mode 100644 drivers/staging/iio/Documentation/pressure/ms5637
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index ffac8ac..4ba9bd5 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -41,6 +41,16 @@ config MPL3115
To compile this driver as a module, choose M here: the module
will be called mpl3115.
+config MS5637
+ tristate "MS5637 pressure & temperature sensor"
+ depends on I2C
+ help
+ If you say yes here you get support for the Measurement Specialties
+ MS5637 pressure and temperature sensor.
+
+ This driver can also be built as a module. If so, the module will
+ be called ms5637.
+
config IIO_ST_PRESS
tristate "STMicroelectronics pressure sensor Driver"
depends on (I2C || SPI_MASTER) && SYSFS
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index c53d250..50fe66e 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
obj-$(CONFIG_MPL115) += mpl115.o
obj-$(CONFIG_MPL3115) += mpl3115.o
+obj-$(CONFIG_MS5637) += ms5637.o
obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
st_pressure-y := st_pressure_core.o
st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
new file mode 100644
index 0000000..ea74636
--- /dev/null
+++ b/drivers/iio/pressure/ms5637.c
@@ -0,0 +1,488 @@
+/*
+ * ms5637.c - Support for Measurement Specialties MS5637 temperature sensor
+ *
+ * Copyright (c) 2014 Measurement Specialties
+ *
+ * Licensed under the GPL-2.
+ *
+ * (7-bit I2C slave address 0x77)
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+
+/* MS5637 Commands */
+#define MS5637_RESET (0x1E)
+#define MS5637_TEMPERATURE_CONVERSION_START (0x50)
+#define MS5637_PRESSURE_CONVERSION_START (0x40)
+#define MS5637_ADC_READ (0x00)
+#define MS5637_PROM_READ (0xA0)
+#define MS5637_PROM_ELEMENTS_NB (7)
+
+#define ATTR_RESET 0
+#define ATTR_RESOLUTION 1
+
+static const u16 conversion_time[] = { 1000, 2000, 3000, 5000, 9000, 17000 };
+
+struct ms5637_dev {
+ struct i2c_client *client;
+ struct mutex lock; /* mutex protecting this data structure */
+ u16 calibration_coeffs[MS5637_PROM_ELEMENTS_NB];
+ bool got_calibration_words;
+ unsigned long last_update;
+ bool valid;
+ int temperature;
+ unsigned int pressure;
+ u8 resolution_index;
+};
+
+static int ms5637_get_calibration_coeffs(struct ms5637_dev *dev_data,
+ unsigned char index, u16 *word)
+{
+ int ret = 0;
+
+ ret = i2c_smbus_read_word_swapped(dev_data->client,
+ MS5637_PROM_READ + (index << 1));
+ if (ret < 0)
+ return ret;
+ *word = (u16) ret & 0xFFFF;
+ return 0;
+}
+
+static bool ms5637_crc_check(u16 *n_prom, u8 crc)
+{
+ u8 cnt, n_bit;
+ u16 n_rem, crc_read;
+
+ n_rem = 0x00;
+ crc_read = n_prom[0];
+ n_prom[MS5637_PROM_ELEMENTS_NB] = 0;
+ n_prom[0] = (0x0FFF & (n_prom[0])); /* Clear the CRC byte */
+
+ for (cnt = 0; cnt < (MS5637_PROM_ELEMENTS_NB + 1) * 2; cnt++) {
+ if (cnt % 2 == 1)
+ n_rem ^= n_prom[cnt >> 1] & 0x00FF;
+ else
+ n_rem ^= n_prom[cnt >> 1] >> 8;
+
+ for (n_bit = 8; n_bit > 0; n_bit--) {
+ if (n_rem & 0x8000)
+ n_rem = (n_rem << 1) ^ 0x3000;
+ else
+ n_rem <<= 1;
+ }
+ }
+ n_rem >>= 12;
+ n_prom[0] = crc_read;
+ return (n_rem == crc);
+}
+
+static int ms5637_fill_calibration_coeffs(struct ms5637_dev *dev_data)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < MS5637_PROM_ELEMENTS_NB; i++) {
+ ret = ms5637_get_calibration_coeffs(dev_data, i,
+ &dev_data->calibration_coeffs
+ [i]);
+
+ dev_dbg(&dev_data->client->dev, "Coeff %d : %d", i,
+ dev_data->calibration_coeffs[i]);
+
+ if (ret < 0) {
+ dev_err(&dev_data->client->dev,
+ "unable to get calibration coefficients at
address %d\n",
+ i + 1);
+ return ret;
+ }
+ }
+
+ if (!ms5637_crc_check(dev_data->calibration_coeffs,
+ (dev_data->
+ calibration_coeffs[0] & 0xF000) >> 12)) {
+ dev_err(&dev_data->client->dev,
+ "Calibration coefficients crc check error\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ms5637_read_adc_value(struct ms5637_dev *dev_data, u32 *adc_value)
+{
+ int ret = 0;
+ u8 buf[3];
+
+ ret =
+ i2c_smbus_read_i2c_block_data(dev_data->client, MS5637_ADC_READ, 3,
+ buf);
+ if (ret < 0)
+ return ret;
+ dev_dbg(&dev_data->client->dev, "ADC raw value : %x %x %x\n", buf[0],
+ buf[1], buf[2]);
+ *adc_value = (buf[0] << 16) + (buf[1] << 8) + buf[0];
+ return 0;
+}
+
+static int ms5637_conversion_and_read_adc(struct ms5637_dev *dev_data,
+ u32 *t_adc, u32 *p_adc)
+{
+ int ret;
+
+ /* Trigger Temperature conversion */
+ ret = i2c_smbus_write_byte(dev_data->client,
+ MS5637_TEMPERATURE_CONVERSION_START
+ + dev_data->resolution_index * 2);
+ if (ret < 0)
+ return ret;
+ usleep_range(conversion_time[dev_data->resolution_index],
+ conversion_time[dev_data->resolution_index]+3000);
+ /* Retrieve ADC value */
+ ret = ms5637_read_adc_value(dev_data, t_adc);
+
+ /* Trigger Pressure conversion */
+ ret = i2c_smbus_write_byte(dev_data->client,
+ MS5637_PRESSURE_CONVERSION_START
+ + dev_data->resolution_index * 2);
+ if (ret < 0)
+ return ret;
+ usleep_range(conversion_time[dev_data->resolution_index],
+ conversion_time[dev_data->resolution_index]+3000);
+ /* Retrieve ADC value */
+ ret = ms5637_read_adc_value(dev_data, p_adc);
+
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int ms5637_read_temperature_and_pressure(struct ms5637_dev *dev_data)
+{
+ int ret = 0;
+ u32 t_adc, p_adc;
+ s32 dt, temp;
+ s64 off, sens, t2, off2, sens2;
+
+ mutex_lock(&dev_data->lock);
+
+ if (time_after(jiffies, dev_data->last_update + HZ / 2) ||
+ !dev_data->valid) {
+ if (!dev_data->got_calibration_words) {
+ ret = ms5637_fill_calibration_coeffs(dev_data);
+ if (ret < 0)
+ goto out;
+
+ dev_data->got_calibration_words = true;
+ }
+
+ ret = ms5637_conversion_and_read_adc(dev_data, &t_adc, &p_adc);
+
+ if (ret < 0) {
+ dev_data->got_calibration_words = false;
+ dev_err(&dev_data->client->dev,
+ "unable to make sensor adc conversion\n");
+ goto out;
+ }
+
+ dt = (s32) t_adc - (dev_data->calibration_coeffs[5] << 8);
+
+ /* Actual temperature = 2000 + dT * TEMPSENS */
+ temp =
+ 2000 + (((s64) dt * dev_data->calibration_coeffs[6]) >> 23);
+
+ /* Second order temperature compensation */
+ if (temp < 2000) {
+ s64 tmp = (s64) temp - 2000;
+
+ t2 = (3 * ((s64) dt * (s64) dt)) >> 33;
+ off2 = (61 * tmp * tmp) >> 4;
+ sens2 = (29 * tmp * tmp) >> 4;
+
+ if (temp < -1500) {
+ s64 tmp = (s64) temp + 1500;
+
+ off2 += 17 * tmp * tmp;
+ sens2 += 9 * tmp * tmp;
+ }
+ } else {
+ t2 = (5 * ((s64) dt * (s64) dt)) >> 38;
+ off2 = 0;
+ sens2 = 0;
+ }
+
+ /* OFF = OFF_T1 + TCO * dT */
+ off = (((s64) dev_data->calibration_coeffs[2]) << 17)
+ +
+ ((((s64) dev_data->calibration_coeffs[4]) * (s64) dt) >> 6);
+ off -= off2;
+
+ /* Sensitivity at actual temperature = SENS_T1 + TCS * dT */
+ sens = (((s64) dev_data->calibration_coeffs[1]) << 16)
+ + (((s64) dev_data->calibration_coeffs[3] * dt) >> 7);
+ sens -= sens2;
+
+ /* Temperature compensated pressure = D1 * SENS - OFF */
+ dev_data->temperature = (temp - t2) * 10;
+ dev_data->pressure = (u32) (((((s64) p_adc * sens) >> 21)
+ - off) >> 15) / 100;
+
+ dev_data->last_update = jiffies;
+ dev_data->valid = true;
+ }
+ out:
+ mutex_unlock(&dev_data->lock);
+
+ return ret >= 0 ? 0 : ret;
+}
+
+static int ms5637_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *channel, int *val,
+ int *val2, long mask)
+{
+ int ret;
+ struct ms5637_dev *dev_data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ switch (channel->type) {
+ case IIO_TEMP: /* in 0.001 °C */
+ ret = ms5637_read_temperature_and_pressure(dev_data);
+ if (ret)
+ goto t_err;
+ *val = dev_data->temperature;
+ break;
+ case IIO_PRESSURE: /* in mB */
+ ret = ms5637_read_temperature_and_pressure(dev_data);
+ if (ret)
+ goto p_err;
+ *val = dev_data->pressure;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+ t_err:
+ dev_err(&indio_dev->dev, "Temperature read error\n");
+ return ret;
+ p_err:
+ dev_err(&indio_dev->dev, "Pressure read error\n");
+ return ret;
+}
+
+static const struct iio_chan_spec ms5637_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .output = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .scan_index = 0,
+ },
+ {
+ .type = IIO_PRESSURE,
+ .output = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .scan_index = 0,
+ }
+};
+
+static ssize_t ms5637_read_attr(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ms5637_dev *dev_data = iio_priv(indio_dev);
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+ int ret = 0;
+
+ switch (this_attr->address) {
+ case ATTR_RESET:
+ ret = sprintf(buf, "0\n");
+ break;
+ case ATTR_RESOLUTION:
+ ret = sprintf(buf, "%d\n", dev_data->resolution_index + 8);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static ssize_t ms5637_write_attr(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ms5637_dev *dev_data = iio_priv(indio_dev);
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+ u8 val;
+ int ret;
+
+ ret = kstrtou8(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&dev_data->lock);
+ switch (this_attr->address) {
+ case ATTR_RESET:
+ if (val != 1)
+ goto einval;
+
+ ret = i2c_smbus_write_byte(dev_data->client, MS5637_RESET);
+ if (ret < 0)
+ goto out;
+ usleep_range(3000, 6000);
+
+ break;
+ case ATTR_RESOLUTION:
+ if ((val < 8) || (val > 13))
+ goto einval;
+ dev_data->resolution_index = val - 8;
+ break;
+ default:
+ goto einval;
+ }
+
+ dev_data->valid = false;
+ goto out;
+ einval:
+ ret = -EINVAL;
+ out:
+ mutex_unlock(&dev_data->lock);
+
+ return ret ? ret : len;
+}
+
+static IIO_DEVICE_ATTR(in_reset,
+ S_IRUGO | S_IWUSR,
+ ms5637_read_attr, ms5637_write_attr, ATTR_RESET);
+static IIO_DEVICE_ATTR(in_resolution,
+ S_IRUGO | S_IWUSR,
+ ms5637_read_attr, ms5637_write_attr, ATTR_RESOLUTION);
+static IIO_CONST_ATTR(resolution_available, "8 9 10 11 12 13");
+
+static struct attribute *ms5637_attributes[] = {
+ &iio_dev_attr_in_reset.dev_attr.attr,
+ &iio_dev_attr_in_resolution.dev_attr.attr,
+ &iio_const_attr_resolution_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ms5637_attribute_group = {
+ .attrs = ms5637_attributes,
+};
+
+static const struct iio_info ms5637_info = {
+ .read_raw = ms5637_read_raw,
+ .attrs = &ms5637_attribute_group,
+ .driver_module = THIS_MODULE,
+};
+
+static int ms5637_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ms5637_dev *dev_data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+ dev_err(&client->dev,
+ "adapter does not support SMBus read word
transactions\n");
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WRITE_BYTE)) {
+ dev_err(&client->dev,
+ "adapter does not support SMBus write byte
transactions\n");
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ dev_err(&client->dev,
+ "adapter does not support SMBus read block
transactions\n");
+ return -ENODEV;
+ }
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ dev_data = iio_priv(indio_dev);
+ dev_data->client = client;
+ mutex_init(&dev_data->lock);
+
+ indio_dev->info = &ms5637_info;
+ indio_dev->name = id->name;
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ms5637_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ms5637_channels);
+
+ i2c_set_clientdata(client, indio_dev);
+ ret = iio_device_register(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte(client, MS5637_RESET);
+ if (ret < 0)
+ return ret;
+ usleep_range(3000, 6000);
+
+ ret = ms5637_fill_calibration_coeffs(dev_data);
+ if (ret == 0)
+ dev_data->got_calibration_words = true;
+
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(&client->dev, "Driver initialization done");
+ return 0;
+}
+
+static int ms5637_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id ms5637_id[] = {
+ {"ms5637", 0},
+ {}
+};
+
+static struct i2c_driver ms5637_driver = {
+ .probe = ms5637_probe,
+ .remove = ms5637_remove,
+ .id_table = ms5637_id,
+ .driver = {
+ .name = "ms5637",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_i2c_driver(ms5637_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Measurement Specialties MS5637 temperature driver");
+MODULE_AUTHOR("William Markezana <william.markez...@meas-spec.com>");
+MODULE_AUTHOR("Ludovic Tancerel <ludovic.tance...@maplehightech.com>");
diff --git a/drivers/staging/iio/Documentation/pressure/ms5637
b/drivers/staging/iio/Documentation/pressure/ms5637
new file mode 100644
index 0000000..d0d64f3
--- /dev/null
+++ b/drivers/staging/iio/Documentation/pressure/ms5637
@@ -0,0 +1,25 @@
+Kernel driver ms5637
+====================
+
+Supported chips:
+ * Measurement Specialties MS5637
+ Prefix: 'ms5637'
+ Addresses scanned: I2C 0x76
+ Datasheet: Available for download on meas-spec.com
+
+Authors:
+ William Markezana (Meas-Spec) <william.markez...@meas-spec.com>
+ Ludovic Tancerel <ludovic.tance...@maplehightech.com>
+
+Description
+-----------
+
+The MS5637 is a single chip pressure & temperature sensor.
+The driver returns a milli-bar pressure value and a milli-degre celius value
using the iio framework
+
+Via the iio sysfs interface, there are several attributes available.
+in_reset - Reset ms5637 device by writing a 1 in it.
+in_resolution - Set the number of bits for ADC resolution.
+out_pressure_input - Current pressure from ms5637 sensor (milli-bar)
+out_temp_input - Current temperature from htu21 sensor (milli-°C value)
+resolution_available - List of resolutions supported
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
