Hi Paul, On 20/05/14 17:56, Paul Bolle wrote: > There used to be a Kconfig symbol BSEIP. It was PPC specific and was > removed in v2.6.27. So the check for CONFIG_BSEIP can be removed. This > means a few defines will be removed. None of the macros involved are > used, so no one should care. > > Signed-off-by: Paul Bolle <pebo...@tiscali.nl>
Thanks, applied to m68knommu for-next branch. Regards Greg > --- > Untested. > > arch/m68k/include/asm/commproc.h | 22 ---------------------- > 1 file changed, 22 deletions(-) > > diff --git a/arch/m68k/include/asm/commproc.h > b/arch/m68k/include/asm/commproc.h > index 66a36bd51aa1..c67e09279ea9 100644 > --- a/arch/m68k/include/asm/commproc.h > +++ b/arch/m68k/include/asm/commproc.h > @@ -480,28 +480,6 @@ typedef struct scc_enet { > #define SICR_ENET_CLKRT ((uint)0x0000003d) > #endif > > -#ifdef CONFIG_BSEIP > -/* This ENET stuff is for the MPC823 with ethernet on SCC2. > - * This is unique to the BSE ip-Engine board. > - */ > -#define PA_ENET_RXD ((ushort)0x0004) > -#define PA_ENET_TXD ((ushort)0x0008) > -#define PA_ENET_TCLK ((ushort)0x0100) > -#define PA_ENET_RCLK ((ushort)0x0200) > -#define PB_ENET_TENA ((uint)0x00002000) > -#define PC_ENET_CLSN ((ushort)0x0040) > -#define PC_ENET_RENA ((ushort)0x0080) > - > -/* BSE uses port B and C bits for PHY control also. > -*/ > -#define PB_BSE_POWERUP ((uint)0x00000004) > -#define PB_BSE_FDXDIS ((uint)0x00008000) > -#define PC_BSE_LOOPBACK ((ushort)0x0800) > - > -#define SICR_ENET_MASK ((uint)0x0000ff00) > -#define SICR_ENET_CLKRT ((uint)0x00002c00) > -#endif > - > /* SCC Event register as used by Ethernet. > */ > #define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop > complete */ > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/