On Sunday 09 November 2014 21:34:59 Dmitry Torokhov wrote:
> On Sun, Nov 09, 2014 at 12:22:51PM +0100, Pali Rohár wrote:
> > On Sunday 09 November 2014 08:50:39 Dmitry Torokhov wrote:
> > > Hi Pali,
> > > 
> > > On Sun, Nov 02, 2014 at 12:25:09AM +0100, Pali Rohár wrote:
> > > > Sometimes on Dell Latitude laptops psmouse/alps driver
> > > > receive invalid ALPS protocol V3 packets with bit7 set
> > > > in last byte. More often it can be reproduced on Dell
> > > > Latitude E6440 or E7440 with closed lid and pushing
> > > > cover above touchpad.
> > > > 
> > > > If bit7 in last packet byte is set then it is not valid
> > > > ALPS packet. I was told that ALPS devices never send
> > > > these packets. It is not know yet who send those
> > > > packets, it could be Dell EC, bug in BIOS and also bug
> > > > in touchpad firmware...
> > > > 
> > > > With this patch alps driver does not process those
> > > > invalid packets and drops it with PSMOUSE_FULL_PACKET
> > > > so psmouse driver does not enter to out of sync state.
> > > > 
> > > > This patch fix problem when psmouse driver still
> > > > resetting ALPS device when laptop lid is closed because
> > > > of receiving invalid packets in out of sync state.
> > > > 
> > > > Signed-off-by: Pali Rohár <pali.ro...@gmail.com>
> > > > Tested-by: Pali Rohár <pali.ro...@gmail.com>
> > > > Cc: sta...@vger.kernel.org
> > > > ---
> > > > 
> > > >  drivers/input/mouse/alps.c |   10 ++++++++++
> > > >  1 file changed, 10 insertions(+)
> > > > 
> > > > diff --git a/drivers/input/mouse/alps.c
> > > > b/drivers/input/mouse/alps.c index 7c47e97..e802d28
> > > > 100644 --- a/drivers/input/mouse/alps.c
> > > > +++ b/drivers/input/mouse/alps.c
> > > > @@ -1181,6 +1181,16 @@ static psmouse_ret_t
> > > > alps_process_byte(struct psmouse *psmouse)
> > > > 
> > > >                 return PSMOUSE_BAD_DATA;
> > > >         
> > > >         }
> > > > 
> > > > +       if (priv->proto_version == ALPS_PROTO_V3 &&
> > > > psmouse->pktcnt == psmouse->pktsize) { +                // For
> > > > protocol V3, do not process data when last packet's
> > > > bit7 is set +           if (psmouse->packet[psmouse->pktcnt - 
1]
> > > > & 0x80) { +                     psmouse_dbg(psmouse, "v3 discard
> > > > packet[%i] =
> > 
> > %x\n",
> > 
> > > > +                                   psmouse->pktcnt - 1,
> > > > +                                   psmouse->packet[psmouse->pktcnt - 
> > > > 1]);
> > > > +                       return PSMOUSE_FULL_PACKET;
> > > > +               }
> > > > +       }
> > > 
> > > I wanted to apply it, but I would like some more data.
> > > Could you please send me the dmesg with i8042.debug wit
> > > this patch in place?
> > > 
> > > Thanks!
> > 
> > See attachment. It contains debug log from both
> > i8042.debug=1 and psmouse.ko with applied all 4 patches.
> 
> Thank you Pali.
> 
> OK, so it looks like the problematic byte is the last one and
> we should be resynching right away. With your other patch
> increasing number of bad packets before issuing resync this
> special handling is no longer needed, right?
> 
> Thanks.

Problem is that in this special case driver is still out-of-sync 
and cause problems. E.g there is big dmesg flood and it is not 
good to have that when LID is closed for a long time.

-- 
Pali Rohár
pali.ro...@gmail.com

Attachment: signature.asc
Description: This is a digitally signed message part.

Reply via email to