On Tue, Nov 11, 2014 at 12:49:36PM -0500, David Miller wrote: > 22 patches is just too much, sorry. > > Please reduce this down to something closer to ~10 or so patches. > > If necessary you can do two series, submit the first 10 and then > when that's reviewed and accepted submit the second set.
No problem. The three driver-registration patches are really self-contained and could be reviewed and applied separately, and then I split the remaining ones where I add the device-type abstraction, that is: Series 1: net: phy: add module_phy_driver macro net: phy: replace phy_driver_register calls net: phy: replace phy_drivers_register calls Series 2: dt/bindings: fix documentation of ethernet-phy compatible property net: phy: micrel: fix config_intr error handling net: phy: micrel: use BIT macro net: phy: micrel: refactor broadcast disable net: phy: micrel: disable broadcast for KSZ8081/KSZ8091 net: phy: micrel: add led-mode sanity check net: phy: micrel: refactor led-mode error handling net: phy: micrel: clean up led-mode setup net: phy: micrel: enable led-mode for KSZ8081/KSZ8091 Series 3 (submitted after review of Series 2): net: phy: add static data field to struct phy_driver net: phy: micrel: add device-type abstraction net: phy: micrel: parse of nodes at probe net: phy: micrel: add has-broadcast-disable flag to type data net: phy: micrel: add generic rmii-ref-clk-sel support net: phy: micrel: add support for rmii_ref_clk_sel to KSZ8081/KSZ8091 dt/bindings: add micrel,rmii_ref_clk_sel_25_mhz to eth-phy binding net: phy: micrel: refactor interrupt config net: phy: micrel: add copyright entry net: phy: micrel: use generic config_init for KSZ8021/KSZ8031 Thanks, Johan -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
