Signed-off-by: Andy Yan <andy....@rock-chips.com>

---

Changes in v9: None
Changes in v8:
- Add documentation for rockchip dw hdmi

Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 .../devicetree/bindings/video/dw_hdmi-rockchip.txt | 43 ++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt

diff --git a/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt 
b/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
new file mode 100644
index 0000000..6ea6764
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
@@ -0,0 +1,43 @@
+Rockchip specific extensions to the Synopsys Designware HDMI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-dw-hdmi";
+- reg: physical base address of the controller and length
+- ddc-i2c-bus:  phandle of an I2C controller used for DDC EDID probing
+- clocks: from common clock binding: handle to hdmi clock.
+- clock-names: should be "clk" "hdcp_clk"
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- interrupts: HDMI interrupt number
+- ports: contain a port node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. For
+  vopb,set the reg = <0> and set the reg = <1> for vopl.
+- reg-io-width: the width of the reg:1,4, the value should be 4 on
+  rk3288 platform
+
+Example:
+hdmi: hdmi@ff980000 {
+       compatible = "rockchip,rk3288-dw-hdmi";
+       reg = <0xff980000 0x20000>;
+       reg-io-width = <4>;
+       ddc-i2c-bus = <&i2c5>;
+       rockchip,grf = <&grf>;
+       interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+       clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+       clock-names = "clk", "hdcp_clk";
+       status = "disabled";
+       ports {
+               hdmi_in: port {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       hdmi_in_vopb: endpoint@0 {
+                               reg = <0>;
+                               remote-endpoint = <&vopb_out_hdmi>;
+                       };
+                       hdmi_in_vopl: endpoint@1 {
+                               reg = <1>;
+                               remote-endpoint = <&vopl_out_hdmi>;
+                       };
+               };
+       };
+};
-- 
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to