On Wed, Nov 26, 2014 at 10:30:24AM +0000, Marc Zyngier wrote:
> Hi Liviu,
> 
> On 11/11/14 17:32, Liviu Dudau wrote:
> > This adds support for ARM's Juno development board (rev 0).
> > It enables most of the board peripherals: UART, I2C, USB, MMC and
> > 100Mb ethernet. There is no support at the moment for clock setting
> > and HDLCD driver which depends on it.
> > 
> > Signed-off-by: Liviu Dudau <liviu.du...@arm.com>
> > ---
> >  arch/arm64/boot/dts/arm/Makefile              |   1 +
> >  arch/arm64/boot/dts/arm/juno-clocks.dtsi      |  45 ++++++
> >  arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 129 +++++++++++++++
> >  arch/arm64/boot/dts/arm/juno.dts              | 218 
> > ++++++++++++++++++++++++++
> >  4 files changed, 393 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/arm/juno-clocks.dtsi
> >  create mode 100644 arch/arm64/boot/dts/arm/juno-motherboard.dtsi
> >  create mode 100644 arch/arm64/boot/dts/arm/juno.dts
> > 
> 
> [...]
> 
> > diff --git a/arch/arm64/boot/dts/arm/juno.dts 
> > b/arch/arm64/boot/dts/arm/juno.dts
> > new file mode 100644
> > index 0000000..097ecc4
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/arm/juno.dts
> 
> [...]
> 
> > +       timer {
> > +               compatible = "arm,armv8-timer";
> > +               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | 
> > IRQ_TYPE_EDGE_RISING)>,
> > +                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | 
> > IRQ_TYPE_EDGE_RISING)>,
> > +                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | 
> > IRQ_TYPE_EDGE_RISING)>,
> > +                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | 
> > IRQ_TYPE_EDGE_RISING)>;
> > +       };
> 
> Sorry, I should have spotted this earlier: all these interrupts are
> *level*, not edge. This happens to work because the GIC's config
> register is RO for PPIs on Juno, but still...

Yes, I've seen your other email to Suravee regarding interrupt triggering and I 
was trying to
find the relevant bits in Juno to tell me why I've put the info in DT this way. 
Maybe I *did*
copy-paste this part from FVP DT though.

I will send a patch to Olof to update.

Best regards,
Liviu

> 
> Thanks,
> 
>       M.
> -- 
> Jazz is not dead. It just smells funny...
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to