Hi Doug.

I think good that this patch is separated to two patches.
(board file and codes relevant to mmc.)

Best Regards,
Jaehoon Chung

On 12/03/2014 05:49 AM, Doug Anderson wrote:
> In (3fcb027 ARM: MXC: mxcmmc: work around a bug in the SDHC busy line
> handling) the optional init_card() callback was added.  According to
> the original change it was "for now only called from
> mmc_sdio_init_card()".
> 
> This callback really ought to be called from the SD and MMC init
> functions as well.  One current user of this callback
> (mxcmci_init_card) will not work as expected if you insert an SDIO
> card, then eject it and put a normal SD card in.  Specifically the
> normal SD card will not get to run with 4-bit data.
> 
> I'd like to use the init_card() callback to handle a similar quirk on
> dw_mmc when using SDIO Interrupts (the "low power" feature of the card
> needs to be disabled), so that will add a second user of the function.
> 
> As part of this change fixup the one place that relied on the callback
> only happening for SDIO cards.
> 
> Signed-off-by: Doug Anderson <diand...@chromium.org>
> Reviewed-by: Grant Grundler <grund...@chromium.org>
> ---
> Changes in v3:
> - Add fixup to pandora_wl1251_init_card().
> 
> Changes in v2:
> - mmc core change new for this version.
> 
>  arch/arm/mach-omap2/board-omap3pandora.c | 14 ++++++++------
>  drivers/mmc/core/mmc.c                   |  6 ++++++
>  drivers/mmc/core/sd.c                    |  7 ++++++-
>  3 files changed, 20 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap3pandora.c 
> b/arch/arm/mach-omap2/board-omap3pandora.c
> index 7f17087..969e100 100644
> --- a/arch/arm/mach-omap2/board-omap3pandora.c
> +++ b/arch/arm/mach-omap2/board-omap3pandora.c
> @@ -254,12 +254,14 @@ static void pandora_wl1251_init_card(struct mmc_card 
> *card)
>        * We have TI wl1251 attached to MMC3. Pass this information to
>        * SDIO core because it can't be probed by normal methods.
>        */
> -     card->quirks |= MMC_QUIRK_NONSTD_SDIO;
> -     card->cccr.wide_bus = 1;
> -     card->cis.vendor = 0x104c;
> -     card->cis.device = 0x9066;
> -     card->cis.blksize = 512;
> -     card->cis.max_dtr = 20000000;
> +     if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
> +             card->quirks |= MMC_QUIRK_NONSTD_SDIO;
> +             card->cccr.wide_bus = 1;
> +             card->cis.vendor = 0x104c;
> +             card->cis.device = 0x9066;
> +             card->cis.blksize = 512;
> +             card->cis.max_dtr = 20000000;
> +     }
>  }
>  
>  static struct omap2_hsmmc_info omap3pandora_mmc[] = {
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 02ad792..4a21d66 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1297,6 +1297,12 @@ static int mmc_init_card(struct mmc_host *host, u32 
> ocr,
>       }
>  
>       /*
> +      * Call the optional HC's init_card function to handle quirks.
> +      */
> +     if (host->ops->init_card)
> +             host->ops->init_card(host, card);
> +
> +     /*
>        * For native busses:  set card RCA and quit open drain mode.
>        */
>       if (!mmc_host_is_spi(host)) {
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index d90a6de..29fccdc 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -933,6 +933,12 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 
> ocr,
>       }
>  
>       /*
> +      * Call the optional HC's init_card function to handle quirks.
> +      */
> +     if (host->ops->init_card)
> +             host->ops->init_card(host, card);
> +
> +     /*
>        * For native busses:  get card RCA and quit open drain mode.
>        */
>       if (!mmc_host_is_spi(host)) {
> @@ -1271,4 +1277,3 @@ err:
>  
>       return err;
>  }
> -
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to