Hi Roy,
Why you send two patches with different commit message but the same
change,
you should use V2 for a new patch.
On 12/03/2014 09:46 PM, LiYunzhi wrote:
From: lyz <l...@rock-chips.com>
You don't need the From for the patches from yourself.
Add a driver for the Rockchip SoC internal USB2.0 PHY.
This driver currently support RK3288.
Signed-off-by: lyz <l...@rock-chips.com>
Remember to use you Full name here for From/Signed-off-by
or all the kind of signature.
---
.../devicetree/bindings/phy/rockchip-usb-phy.txt | 17 ++
The document should be in a separate patch, so please split this into
two patches.
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-usb.c | 179 +++++++++++++++++++++
4 files changed, 204 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
create mode 100644 drivers/phy/phy-rockchip-usb.c
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
new file mode 100644
index 0000000..18ccc2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -0,0 +1,17 @@
+ROCKCHIP USB2 PHY
+
+Required properties:
+ - compatible: rockchip,rk3288-usb-phy
+ - rockchip,grf : phandle to the syscon managing the "general
+ register files"
+ - #phy-cells: must be 1
+Refer to phy/phy-bindings.txt for the generic PHY binding
+properties
+
+Example:
+
+ usbphy: phy {
+ #phy-cells = <1>;
+ compatible = "rockchip,rk3288-usb-phy";
+ rockchip,grf = <&grf>;
+ };
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 2a436e6..54ab088 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -218,6 +218,13 @@ config PHY_QCOM_IPQ806X_SATA
depends on OF
select GENERIC_PHY
+config PHY_ROCKCHIP_RK3288_USB2
+ tristate "Rockchip USB2 RK3288 PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip USB 2.0 PHY.
+
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index c4590fc..f4f2f79 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -25,6 +25,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) +=
phy-exynos5250-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_ROCKCHIP_RK3288_USB2) += phy-rockchip-usb.o
Add this after 'CONFIG_PHY_QCOM_IPQ806X_SATA'.
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
new file mode 100644
index 0000000..2586b76
--- /dev/null
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -0,0 +1,179 @@
+/*
+ * Rockchip usb PHY driver
+ *
+ * Copyright (C) 2014 Roy Li <l...@rock-chips.com>
+ * Copyright (C) 2014 ROCKCHIP, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define ROCKCHIP_RK3288_UOC(n) (0x320 + n * 0x14)
+
+#define SIDDQ_MSK (1 << (13 + 16))
+#define SIDDQ_ON (1 << 13)
+#define SIDDQ_OFF (0 << 13)
+
+enum rk3288_phy_id {
+ RK3288_OTG,
+ RK3288_HOST0,
+ RK3288_HOST1,
+ RK3288_NUM_PHYS,
+};
+
+struct rockchip_usb_phy {
+ struct regmap *reg_base;
+ unsigned int reg_offset;
+ struct clk *clk;
+ struct phy *phy;
+};
+
+static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
+ bool siddq)
+{
+ return regmap_write(phy->reg_base, phy->reg_offset,
+ SIDDQ_MSK | (siddq ? SIDDQ_ON : SIDDQ_OFF));
+}
+
+static int rockchip_usb_phy_power_off(struct phy *_phy)
+{
+ struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+ int ret = 0;
+
+ /* Power down usb phy analog blocks by set siddq 1*/
+ ret = rockchip_usb_phy_power(phy, 1);
Use a MACRO like ON/OFF instead of 1/0?
and then we don't need the comment anymore.
+ if (ret)
+ return ret;
+
+ clk_disable_unprepare(phy->clk);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int rockchip_usb_phy_power_on(struct phy *_phy)
+{
+ struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+ int ret = 0;
+
+ ret = clk_prepare_enable(phy->clk);
+ if (ret)
+ return ret;
+
+ /* Power up usb phy analog blocks by set siddq 0*/
+ ret = rockchip_usb_phy_power(phy, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static struct phy *rockchip_usb_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct rockchip_usb_phy *phy_array = dev_get_drvdata(dev);
+
+ if (WARN_ON(args->args[0] == 0 || args->args[0] >= RK3288_NUM_PHYS))
+ return ERR_PTR(-ENODEV);
+
+ return (phy_array + args->args[0])->phy;
+}
+
+static struct phy_ops ops = {
+ .power_on = rockchip_usb_phy_power_on,
+ .power_off = rockchip_usb_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int rockchip_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rockchip_usb_phy *rk_phy;
+ struct rockchip_usb_phy *phy_array;
+ struct phy_provider *phy_provider;
+ struct regmap *grf;
+ char clk_name[16];
+ int i;
+
+ grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+ if (IS_ERR(grf)) {
+ dev_err(&pdev->dev, "Missing rockchip,grf property\n");
+ return PTR_ERR(grf);
+ }
+
+ phy_array = devm_kzalloc(dev, RK3288_NUM_PHYS * sizeof(*rk_phy),
+ GFP_KERNEL);
+ if (!phy_array)
+ return -ENOMEM;
+
+ for (i = 0; i < RK3288_NUM_PHYS; i++) {
+ rk_phy = &phy_array[i];
+
+ rk_phy->reg_base = grf;
+
+ rk_phy->reg_offset = ROCKCHIP_RK3288_UOC(i);
+
+ snprintf(clk_name, sizeof(clk_name), "usbphy%d", i);
+ rk_phy->clk = devm_clk_get(dev, clk_name);
+ if (IS_ERR(rk_phy->clk)) {
+ dev_warn(dev, "failed to get clock %s\n", clk_name);
+ rk_phy->clk = NULL;
+ }
+
+ rk_phy->phy = devm_phy_create(dev, NULL, &ops, NULL);
+ if (IS_ERR(rk_phy->phy)) {
+ dev_err(dev, "failed to create PHY %d\n", i);
+ return PTR_ERR(rk_phy->phy);
+ }
+ phy_set_drvdata(rk_phy->phy, rk_phy);
+ }
+
+ platform_set_drvdata(pdev, phy_array);
+
+ phy_provider = devm_of_phy_provider_register(dev,
+ rockchip_usb_phy_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
+ { .compatible = "rockchip,rk3288-usb-phy" },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids);
+
+static struct platform_driver rockchip_usb_driver = {
Maybe use rockchip_usb_phy_driver is better?
+ .probe = rockchip_usb_phy_probe,
+ .driver = {
+ .name = "rockchip-usb-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = rockchip_usb_phy_dt_ids,
+ },
+};
+
+module_platform_driver(rockchip_usb_driver);
+
+MODULE_AUTHOR("Roy Li <l...@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/