Addy, On Wed, Dec 3, 2014 at 6:49 PM, Addy Ke <[email protected]> wrote: > All of mmc controllers include SDMMC, SDIO0, SDIO1, and EMMC on RK3288 > are limited to 150Mhz. It was mainly caused by two reasons: > - RK3288's IO pad(except DDR IO pad) is generic, which can only support > the max of 150Mhz. > - Mmc controller was designed at 150Mhz, and the pressure test by IC team > was based on this freequency point. > > Signed-off-by: Addy Ke <[email protected]> > --- > arch/arm/boot/dts/rk3288.dtsi | 4 ++++ > 1 file changed, 4 insertions(+)
Your explanation is reasonable. The 150MHz rate is also listed in the latest datasheet. It's unfortunate that we won't get full speed of SDR104 or hs200 on this SoC, but correctness certainly outweighs performance. Reviewed-by: Doug Anderson <[email protected]> I have tested that this prevents the speed from going above 150MHz on rk3288-pinky on SD Cards, so: Tested-by: Doug Anderson <[email protected]> -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
