This adds another timer combination of PIT/HPET to go with HPET/HPET, HPET/TSC and PIT/TSC! This system that has HPET and doesn't have Legacy support, does it support routing HPET interrupts through IOAPIC in standard routing option? If yes, then I think adding support to route HPET interrupts in a non-legacy way (using IRQs other than IRQ 0) is another option here. I looked at that when adding initial HPET support on i386, but dropped that idea after looking at all the changes required and also due to the reason that all HPET capable systems I had also had Legacy Support.
Some comments on the patch inlined below.. On Tue, Apr 12, 2005 at 07:43:16PM -0700, john stultz wrote: > > Its likely a similar patch will be necessary for i386. Yes. Pretty much similar change will be required in i386 as well.. > linux-2.6.12-rc2_hpet-nolegacy-fix_A0 > ===================================== > diff -Nru a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c > --- a/arch/x86_64/kernel/time.c 2005-04-12 19:31:50 -07:00 > +++ b/arch/x86_64/kernel/time.c 2005-04-12 19:31:50 -07:00 > @@ -373,8 +374,10 @@ > > write_seqlock(&xtime_lock); > > - if (vxtime.hpet_address) { > - offset = hpet_readl(HPET_T0_CMP) - hpet_tick; > + if (vxtime.hpet_address) > + offset = hpet_readl(HPET_COUNTER); > + > + if (hpet_use_timer) { > delay = hpet_readl(HPET_COUNTER) - offset; Probably this has to change to use HPET_T0_CMP for offset, when hpet_use_timer. Otherwise we will always have delay close to zero in case of hpet_use_timer, which is a change in behaviour. > } else { > spin_lock(&i8253_lock); > @@ -732,7 +735,7 @@ > struct hpet_data hd; > unsigned int ntimer; > > - if (!vxtime.hpet_address) > + if (!hpet_use_timer) > return -1; We may need to do some initialization here even in case of !hpet_use_timer. Like reserving particular HPET timer for timer use. Otherwise, someone else (/dev/hpet) can overwrite the counter. I think we just need to skip setting the interupts part. Thanks, Venki - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/