On 16/12/14 02:20, Nicolas Ferre wrote: > Le 11/12/2014 08:31, Wenyou Yang a écrit : >> Appearance: On some SAMA5D4EK boards, after power up, the Eth1 doesn't work. >> >> Reason: The PIOE2 pin is connected to the NAND_Tree# of KSZ8081, >> But it outputs LOW during the reset period, which cause the NAND_Tree# >> enabled. >> >> Add phy_fixup() to disable NAND_Tree by overriding the Operation >> Mode Strap Override register(i.e. Register 16h) to clear the NAND_Tree bit. >> >> Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com> > > It seems correct to me.
Just one minor nit, see below > > Acked-by: Nicolas Ferre <nicolas.fe...@atmel.com> > > Anyway, I add Florian in the loop as he is the one who proposed this > solution. So it would have been good to have his feeling about the > implementation... > > Bye, > >> --- >> arch/arm/mach-at91/board-dt-sama5.c | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> >> diff --git a/arch/arm/mach-at91/board-dt-sama5.c >> b/arch/arm/mach-at91/board-dt-sama5.c >> index 8fb9ef5..97f7367 100644 >> --- a/arch/arm/mach-at91/board-dt-sama5.c >> +++ b/arch/arm/mach-at91/board-dt-sama5.c >> @@ -17,6 +17,7 @@ >> #include <linux/of_platform.h> >> #include <linux/phy.h> >> #include <linux/clk-provider.h> >> +#include <linux/phy.h> >> >> #include <asm/setup.h> >> #include <asm/irq.h> >> @@ -26,8 +27,25 @@ >> >> #include "generic.h" >> >> +static int ksz8081_phy_fixup(struct phy_device *phy) >> +{ >> + int value; >> + >> + value = phy_read(phy, 0x16); >> + value &= ~0x20; >> + phy_write(phy, 0x16, value); >> + >> + return 0; >> +} >> + >> static void __init sama5_dt_device_init(void) >> { >> + if (of_machine_is_compatible("atmel,sama5d4ek") && >> + IS_ENABLED(CONFIG_PHYLIB)) { >> + phy_register_fixup_for_id("fc028000.etherne:00", >> + ksz8081_phy_fixup); Matching the bus id certainly works, but I would rather match on your specific PHY device 32-bits OUI to make sure that if you ever change the PHY on a different design, this is not inadvertently writing to a register that is not micrel specific? >> + } >> + >> of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); >> } >> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/