This patch lacked a small bit.

Updated patch below.

cu
Adrian


<--  snip  -->


This patch makes needlessly global code static.

Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>

---

 drivers/usb/media/pwc/pwc-ctrl.c |   78 +++++++++++++++----------------
 drivers/usb/media/pwc/pwc-if.c   |    2 
 drivers/usb/media/pwc/pwc.h      |    6 --
 3 files changed, 41 insertions(+), 45 deletions(-)

--- linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc.h.old   2005-04-18 
03:11:14.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc.h       2005-04-18 
03:13:28.000000000 +0200
@@ -226,9 +226,8 @@
 extern "C" {
 #endif
 
-/* Global variables */
+/* Global variable */
 extern int pwc_trace;
-extern int pwc_preferred_compression;
 
 /** functions in pwc-if.c */
 int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int 
new_fps, int new_compression, int new_snapshot);
@@ -243,8 +242,6 @@
 /** Functions in pwc-ctrl.c */
 /* Request a certain video mode. Returns < 0 if not possible */
 extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, 
int frames, int compression, int snapshot);
-/* Calculate the number of bytes per image (not frame) */
-extern void pwc_set_image_buffer_size(struct pwc_device *pdev);
 
 /* Various controls; should be obvious. Value 0..65535, or < 0 on error */
 extern int pwc_get_brightness(struct pwc_device *pdev);
@@ -256,7 +253,6 @@
 extern int pwc_get_saturation(struct pwc_device *pdev);
 extern int pwc_set_saturation(struct pwc_device *pdev, int value);
 extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
-extern int pwc_get_leds(struct pwc_device *pdev, int *on_value, int 
*off_value);
 extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor);
 
 /* Power down or up the camera; not supported by all models */
--- linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc-ctrl.c.old      
2005-04-18 03:11:29.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc-ctrl.c  2005-04-18 
22:57:34.000000000 +0200
@@ -418,6 +418,44 @@
 
 
 
+static void pwc_set_image_buffer_size(struct pwc_device *pdev)
+{
+       int i, factor = 0, filler = 0;
+
+       /* for PALETTE_YUV420P */
+       switch(pdev->vpalette)
+       {
+       case VIDEO_PALETTE_YUV420P:
+               factor = 6;
+               filler = 128;
+               break;
+       case VIDEO_PALETTE_RAW:
+               factor = 6; /* can be uncompressed YUV420P */
+               filler = 0;
+               break;
+       }
+
+       /* Set sizes in bytes */
+       pdev->image.size = pdev->image.x * pdev->image.y * factor / 4;
+       pdev->view.size  = pdev->view.x  * pdev->view.y  * factor / 4;
+
+       /* Align offset, or you'll get some very weird results in
+          YUV420 mode... x must be multiple of 4 (to get the Y's in
+          place), and y even (or you'll mixup U & V). This is less of a
+          problem for YUV420P.
+        */
+       pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC;
+       pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE;
+
+       /* Fill buffers with gray or black */
+       for (i = 0; i < MAX_IMAGES; i++) {
+               if (pdev->image_ptr[i] != NULL)
+                       memset(pdev->image_ptr[i], filler, pdev->view.size);
+       }
+}
+
+
+
 /**
    @pdev: device structure
    @width: viewport width
@@ -475,44 +513,6 @@
 }
 
 
-void pwc_set_image_buffer_size(struct pwc_device *pdev)
-{
-       int i, factor = 0, filler = 0;
-
-       /* for PALETTE_YUV420P */
-       switch(pdev->vpalette)
-       {
-       case VIDEO_PALETTE_YUV420P:
-               factor = 6;
-               filler = 128;
-               break;
-       case VIDEO_PALETTE_RAW:
-               factor = 6; /* can be uncompressed YUV420P */
-               filler = 0;
-               break;
-       }
-
-       /* Set sizes in bytes */
-       pdev->image.size = pdev->image.x * pdev->image.y * factor / 4;
-       pdev->view.size  = pdev->view.x  * pdev->view.y  * factor / 4;
-
-       /* Align offset, or you'll get some very weird results in
-          YUV420 mode... x must be multiple of 4 (to get the Y's in
-          place), and y even (or you'll mixup U & V). This is less of a
-          problem for YUV420P.
-        */
-       pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC;
-       pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE;
-
-       /* Fill buffers with gray or black */
-       for (i = 0; i < MAX_IMAGES; i++) {
-               if (pdev->image_ptr[i] != NULL)
-                       memset(pdev->image_ptr[i], filler, pdev->view.size);
-       }
-}
-
-
-
 /* BRIGHTNESS */
 
 int pwc_get_brightness(struct pwc_device *pdev)
@@ -949,7 +949,7 @@
        return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2);
 }
 
-int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
+static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
 {
        unsigned char buf[2];
        int ret;
--- linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc-if.c.old        
2005-04-18 03:13:37.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc-if.c    2005-04-18 
03:13:53.000000000 +0200
@@ -129,7 +129,7 @@
        int pwc_trace = TRACE_MODULE | TRACE_FLOW | TRACE_PWCX;
 static int power_save = 0;
 static int led_on = 100, led_off = 0; /* defaults to LED that is on while in 
use */
-       int pwc_preferred_compression = 2; /* 0..3 = uncompressed..high */
+static int pwc_preferred_compression = 2; /* 0..3 = uncompressed..high */
 static struct {
        int type;
        char serial_number[30];
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to