On Fri, 19 Dec 2014, Linus Torvalds wrote: > On Fri, Dec 19, 2014 at 3:14 PM, Thomas Gleixner <t...@linutronix.de> wrote: > > Now that all looks correct. So there is something else going on. After > > staring some more at it, I think we are looking at it from the wrong > > angle. > > > > The watchdog always detects CPU1 as stuck and we got completely > > fixated on the csd_wait() in the stack trace on CPU1. Now we have > > stack traces which show a different picture, i.e. CPU1 makes progress > > after a gazillion of seconds. > > .. but that doesn't explain why CPU0 ends up always being at that > *exact* same instruction in the NMI backtrace.
Up to the point where it exposes different instructions and completely different code pathes. I'm not agreeing with your theory that after the RT throttler hit the watchdog and everything else goes completely bonkers. And even before that happens we see a different backtrace on CPU0: [25149.982766] RIP: 0010:[<ffffffff810cf1db>] [<ffffffff810cf1db>] invoke_rcu_core+0x2b/0x50 Though I have to admit that this "very same instruction" pattern puzzled me for quite a while as well. > While a fairly tight loop, together with "mmio read is very expensive > and synchronizing" would explain it. An MMIO read can easily be as > expensive as several thousand instructions. The watchdog timer runs on a fully periodic schedule. It's self rearming via hrtimer_forward_now(hrtimer, ns_to_ktime(sample_period)); So if that aligns with the equally periodic tick interrupt on the other CPU then you might get into that situation due to the fully synchronizing and serializing nature of HPET reads. That can drift apart over time because the timer device (apic or that new fangled tscdeadline timer) are not frequency corrected versus timekeeping. > > I think we really need to look at CPU1 itself. > > Not so fast. Take another look at CPU0. > > [24998.083577] [<ffffffff810e0d3e>] ktime_get+0x3e/0xa0 > [24998.084450] [<ffffffff810e9cd3>] tick_sched_timer+0x23/0x160 > [24998.085315] [<ffffffff810daf96>] __run_hrtimer+0x76/0x1f0 > [24998.086173] [<ffffffff810e9cb0>] ? tick_init_highres+0x20/0x20 > [24998.087025] [<ffffffff810db2e7>] hrtimer_interrupt+0x107/0x260 > [24998.087877] [<ffffffff81031a4b>] local_apic_timer_interrupt+0x3b/0x70 > [24998.088732] [<ffffffff8179bca5>] smp_apic_timer_interrupt+0x45/0x60 > [24998.089583] [<ffffffff8179a0df>] apic_timer_interrupt+0x6f/0x80 > [24998.090435] <EOI> > [24998.091279] [<ffffffff810da66e>] ? __remove_hrtimer+0x4e/0xa0 > [24998.092118] [<ffffffff812c7c7a>] ? ipcget+0x8a/0x1e0 > [24998.092951] [<ffffffff812c7c6c>] ? ipcget+0x7c/0x1e0 > [24998.093779] [<ffffffff812c8d6d>] SyS_msgget+0x4d/0x70 > > > Really. None of that changed. NONE. The likelihood that we hit the > exact same instruction every time? Over a timefraem of more than a > minute? > > The only way I see that happening is (a) NMI is completely buggered, > and the backtrace is just random crap that is always the same. Or (b) > it's really a fairly tight loop. > > The fact that you had a hrtimer interrupt happen in the *middle* of > __remove_hrtimer() is really another fairly strong hint. That smells > like "__remove_hrtimer() has a race with hrtimer interrupts". That __remove_hrtimer has a '?' in front of it. So its not a reliable trace entry. There is NO hrtimer related operation in the msgget() syscall at all and SyS_msgget() is the only reliable entry on that stack trace. So that __remove_hrtimer operation happened before that msgget() syscall and is just a stack artifact. poll/select/nanosleep whatever. > And that race results in a basically endless loop (which perhaps ends > when the HRtimer overflows, in what, a few minutes?) hrtimers overflow in about 584 years > I really don't think you should look at CPU1. Not when CPU0 has such > an interesting pattern that you dismissed just because the HPET is > making progress. No. I did not dismiss it because HPET is making progress. I looked at it from a different angle. So lets assume there is that hrtimer_remove race (I'm certainly going to stare at that tomorrow with fully awake brain. It's past beer o'clock here). How do you explain that: 1) the watchdog always triggers on CPU1? 2) the race only ever happens on CPU0? 3) the hrtimer interrupt took too long message never appears? If that timer interrupt loops forever then it will complain about that. And it leaves that code for sure as the backtrace of CPU0 hits user space later on. 4) the RT throttler hit? Admittetly we dont know from which CPU and which task that comes but that's very simple to figure out. Debug patch below. 5) that the system makes progress afterwards? 6) .... If my assumption about an interrupt storm turns out to be true, then it explain all of the above. I might be wrong as usual, but I still think its worth to have a look. Thanks, tglx --- diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index ee15f5a0d1c1..d9e4153d405b 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -895,7 +895,8 @@ static int sched_rt_runtime_exceeded(struct rt_rq *rt_rq) */ if (likely(rt_b->rt_runtime)) { rt_rq->rt_throttled = 1; - printk_deferred_once("sched: RT throttling activated\n"); + printk_deferred_once("sched: RT throttling activated cpu %d task %s %d\n", + smp_processor_id(), current->comm, current->pid); } else { /* * In case we did anyway, make it go away, -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/