This series makes the transition from old clock code to the clock framework for the pxa25x and pxa27x. That will only leave pxa3xx to be converted. As there is no defconfig using both pxa3xx and any other pxa2xx variant, the previous mess should be avoided.
This change can be very disruptive for pxa25x and pxa27x platforms. So far only Dmitry and me had tested it, and covered tosa (pxa25x), lubbock (pxa25x), mioa701(pxa27x) boards. Once reviewed, I'd like this serie to go through the pxa tree. Therefore an ack from Mike is necesary for the last patch (add missing pxa27x clocks). This is targeted at 3.20 window. Cheers. -- Robert Robert Jarzmik (4): arm: pxa: change clocks init sequence arm: pxa: Transition pxa25x and pxa27x to clk framework arm: pxa: move gpio11 clock to board files clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc arch/arm/Kconfig | 1 + arch/arm/mach-pxa/Makefile | 9 +-- arch/arm/mach-pxa/eseries.c | 5 +- arch/arm/mach-pxa/generic.c | 4 + arch/arm/mach-pxa/generic.h | 2 + arch/arm/mach-pxa/lubbock.c | 3 + arch/arm/mach-pxa/pxa25x.c | 182 ------------------------------------------- arch/arm/mach-pxa/pxa27x.c | 174 +---------------------------------------- drivers/clk/pxa/clk-pxa27x.c | 32 +++++++- 9 files changed, 50 insertions(+), 362 deletions(-) -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/