v4: rename basename to blackarmor-nas220
use "Seagate Blackarmor NAS220" as model name
use node references instead of repeating the bus structure
separate nodes with blank lines
adt7476's node name reflects device function (i.e. thermal)
reduce button labels to "Reset" and "Power"
use GPIO_ACTIVE_LOW for regulator's gpio property
v3: documented UART pinout in dts
v2: indent with tabs only
removed NAND layout
Evgeni Dobrev (1):
add support for Seagate BlackArmor NAS220
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts | 172 ++++++++++++++++++++++
2 files changed, 173 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
