add gmac info in rk3288.dtsi for GMAC driver
changes since v2:
1. add drive-strength in the pinctrl settings
Signed-off-by: Roger Chen <roger.c...@rock-chips.com>
---
arch/arm/boot/dts/rk3288.dtsi | 54 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 0f50d5d..5a26db0 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -358,6 +358,22 @@
status = "disabled";
};
+ gmac: ethernet@ff290000 {
+ compatible = "rockchip,rk3288-gmac";
+ reg = <0xff290000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ rockchip,grf = <&grf>;
+ clocks = <&cru SCLK_MAC>,
+ <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+ <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+ <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth",
+ "mac_clk_rx", "mac_clk_tx",
+ "clk_mac_ref", "clk_mac_refout",
+ "aclk_mac", "pclk_mac";
+ };
+
usb_host0_ehci: usb@ff500000 {
compatible = "generic-ehci";
reg = <0xff500000 0x100>;
@@ -703,6 +719,11 @@
bias-disable;
};
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 15 RK_FUNC_1
&pcfg_pull_none>,
@@ -1040,5 +1061,38 @@
rockchip,pins = <7 23 3 &pcfg_pull_none>;
};
};
+
+ gmac {
+ rgmii_pins: rgmii-pins {
+ rockchip,pins = <3 30 3 &pcfg_pull_none>,
+ <3 31 3 &pcfg_pull_none>,
+ <3 26 3 &pcfg_pull_none>,
+ <3 27 3 &pcfg_pull_none>,
+ <3 28 3 &pcfg_pull_none_12ma>,
+ <3 29 3 &pcfg_pull_none_12ma>,
+ <3 24 3 &pcfg_pull_none_12ma>,
+ <3 25 3 &pcfg_pull_none_12ma>,
+ <4 0 3 &pcfg_pull_none>,
+ <4 5 3 &pcfg_pull_none>,
+ <4 6 3 &pcfg_pull_none>,
+ <4 9 3 &pcfg_pull_none_12ma>,
+ <4 4 3 &pcfg_pull_none_12ma>,
+ <4 1 3 &pcfg_pull_none>,
+ <4 3 3 &pcfg_pull_none>;
+ };
+
+ rmii_pins: rmii-pins {
+ rockchip,pins = <3 30 3 &pcfg_pull_none>,
+ <3 31 3 &pcfg_pull_none>,
+ <3 28 3 &pcfg_pull_none>,
+ <3 29 3 &pcfg_pull_none>,
+ <4 0 3 &pcfg_pull_none>,
+ <4 5 3 &pcfg_pull_none>,
+ <4 4 3 &pcfg_pull_none>,
+ <4 1 3 &pcfg_pull_none>,
+ <4 2 3 &pcfg_pull_none>,
+ <4 3 3 &pcfg_pull_none>;
+ };
+ };
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
