'pp' is unused in mcf_set_termios() and mcf_config_rs485().
Reported-by: Geert Uytterhoeven <ge...@linux-m68k.org>
Signed-off-by: Peter Hurley <pe...@hurleysoftware.com>
---
drivers/tty/serial/mcf.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 1049667..1ca67d0 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -198,7 +198,6 @@ static void mcf_shutdown(struct uart_port *port)
static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned long flags;
unsigned int baud, baudclk;
#if defined(CONFIG_M5272)
@@ -441,7 +440,6 @@ static int mcf_verify_port(struct uart_port *port, struct
serial_struct *ser)
/* Enable or disable the RS485 support */
static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
{
- struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned char mr1, mr2;
/* Get mode registers */
--
2.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
