The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have both
a power and lid GPIO keys but only the former was defined in the
DTS. Add DTS snippets for the lid GPIO key too. These were taken
from the downstream ChromeOS 3.8 kernel tree.

Signed-off-by: Javier Martinez Canillas <[email protected]>
---
 arch/arm/boot/dts/exynos5420-peach-pit.dts | 18 +++++++++++++++++-
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 19 ++++++++++++++++++-
 2 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts 
b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 9a050e1..fa74a73 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -53,7 +53,7 @@
                compatible = "gpio-keys";
 
                pinctrl-names = "default";
-               pinctrl-0 = <&power_key_irq>;
+               pinctrl-0 = <&power_key_irq &lid_irq>;
 
                power {
                        label = "Power";
@@ -61,6 +61,15 @@
                        linux,code = <KEY_POWER>;
                        gpio-key,wakeup;
                };
+
+               lid-switch {
+                       label = "Lid";
+                       gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <5>; /* EV_SW */
+                       linux,code = <0>; /* SW_LID */
+                       debounce-interval = <1>;
+                       gpio-key,wakeup;
+               };
        };
 
        memory {
@@ -658,6 +667,13 @@
                samsung,pin-drv = <0>;
        };
 
+       lid_irq: lid-irq {
+               samsung,pins = "gpx3-4";
+               samsung,pin-function = <0xf>;
+               samsung,pin-pud = <0>;
+               samsung,pin-drv = <0>;
+       };
+
        hdmi_hpd_irq: hdmi-hpd-irq {
                samsung,pins = "gpx3-7";
                samsung,pin-function = <0>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts 
b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index e8fdda8..d603e73 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -52,7 +52,7 @@
                compatible = "gpio-keys";
 
                pinctrl-names = "default";
-               pinctrl-0 = <&power_key_irq>;
+               pinctrl-0 = <&power_key_irq &lid_irq>;
 
                power {
                        label = "Power";
@@ -60,6 +60,16 @@
                        linux,code = <KEY_POWER>;
                        gpio-key,wakeup;
                };
+
+               lid-switch {
+                       label = "Lid";
+                       gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+                       linux,input-type = <5>; /* EV_SW */
+                       linux,code = <0>; /* SW_LID */
+                       debounce-interval = <1>;
+                       gpio-key,wakeup;
+               };
+
        };
 
        memory {
@@ -646,6 +656,13 @@
                samsung,pin-drv = <0>;
        };
 
+       lid_irq: lid-irq {
+               samsung,pins = "gpx3-4";
+               samsung,pin-function = <0xf>;
+               samsung,pin-pud = <0>;
+               samsung,pin-drv = <0>;
+       };
+
        hdmi_hpd_irq: hdmi-hpd-irq {
                samsung,pins = "gpx3-7";
                samsung,pin-function = <0>;
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to