Hi! > there's some problems with swsusp in 2.6.12-rc3 (x86_64):
Are they new or were they in -rc2, too? > 1. Is it necessary to print the following message during regular boot? > swsusp: Suspend partition has wrong signature? > It is a bit annoying and I believe it will confuse some swsusp > users. Hmm, feel free to provide a patch. (I need something to try git on :-). > 2. PCMCIA related hangs during swsusp. > swsusp hangs after freeing memory when either cardmgr is running > or pcmcia cards are *physically* inserted. It is insufficient > to do a 'cardctl eject' the cards must be removed, too, for > swsusp not to hang. I do suspect some problem with the > 'pccardd' kernel threads. Did it work with any older kernel? Which driver is it? yenta? > 3. Sometimes during the search for the suspend hang reason the system > went during suspend into a lightshow of: > eth0: Too much work at interrupt! > and some line that ends in: > release_console_sem+0x13d/0x1c0) > The start of the line is not readable as it just flickers by in > the eth0 message limbo. NIC is a built in RTL-8169 Gigabit Ethernet > (rev 10). Oh, no chance for a serial console capture as there's no > built in serial device in this laptop. How repeatable is that? Will NIC work okay if you rmmod/insmod its driver? Pavel -- 64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/