On 07/01/15 12:18, Harald Geyer wrote:
> Make sure that the read function is not interrupted...
> 
> From: Richard Weinberger <[email protected]>
> Signed-off-by: Richard Weinberger <[email protected]>
> Acked-by: Harald Geyer <[email protected]>
> Reviewed-by: Sanjeev Sharma <[email protected]>
> ---
> Resending again to get the metadata right.
> No Signed-off-by from me, because I didn't contribute anything.
Technically you 'handled' the patch which is all that actually
matters for a sign-off.  Anyhow I don't really care either way ;)

Applied to the fixes-togreg branch of iio.git

Thanks,

Jonathan
> No changes since v1 except reordering.
> 
>  drivers/iio/humidity/dht11.c |    5 +++++
>  1 files changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
> index f546eca..7717f5c 100644
> --- a/drivers/iio/humidity/dht11.c
> +++ b/drivers/iio/humidity/dht11.c
> @@ -29,6 +29,7 @@
>  #include <linux/wait.h>
>  #include <linux/bitops.h>
>  #include <linux/completion.h>
> +#include <linux/mutex.h>
>  #include <linux/delay.h>
>  #include <linux/gpio.h>
>  #include <linux/of_gpio.h>
> @@ -57,6 +58,7 @@ struct dht11 {
>       int                             irq;
>  
>       struct completion               completion;
> +     struct mutex                    lock;
>  
>       s64                             timestamp;
>       int                             temperature;
> @@ -145,6 +147,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
>       struct dht11 *dht11 = iio_priv(iio_dev);
>       int ret;
>  
> +     mutex_lock(&dht11->lock);
>       if (dht11->timestamp + DHT11_DATA_VALID_TIME < iio_get_time_ns()) {
>               reinit_completion(&dht11->completion);
>  
> @@ -185,6 +188,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
>               ret = -EINVAL;
>  err:
>       dht11->num_edges = -1;
> +     mutex_unlock(&dht11->lock);
>       return ret;
>  }
>  
> @@ -268,6 +272,7 @@ static int dht11_probe(struct platform_device *pdev)
>       platform_set_drvdata(pdev, iio);
>  
>       init_completion(&dht11->completion);
> +     mutex_init(&dht11->lock);
>       iio->name = pdev->name;
>       iio->dev.parent = &pdev->dev;
>       iio->info = &dht11_iio_info;
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to