Hi Lee, On Wed, 3 Dec 2014 21:44:04 +0100 Boris Brezillon <boris.brezil...@free-electrons.com> wrote:
> The EBI (External Bus Interface) is used to access external peripherals > (NOR, SRAM, NAND, and other specific devices like ethernet controllers). > Each device is assigned a CS line and an address range and can have its > own configuration (timings, access mode, bus width, ...). > This driver provides a generic DT binding to configure a device according > to its requirements. > For specific device controllers (like the NAND one) the SMC timings > should be configured by the controller driver through the matrix and > smc syscon regmaps. > > The first 4 patches introduce 2 syscon devices needed to configure the > EBI bus, patch 5 and 6 adds support for the EBI bus, and the remaining > patches declares the EBI related nodes in sama5d3 dts[i] files. Can you take the first 4 patches of this series (adding 2 syscon devices and their associated bindings doc) for 3.20 ? Alexandre has worked on multi platform support for Atmel SoCs and his work depends on these two syscon devices. Let me know if you want me to send to send a new series containing only those 4 commits. Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
