Hello LKML,
this patch supports the Infineon Trusted Platform Module SLD 9630 (TPM 1.1b),
which is embedded on Intel-mainboards or in
HP/Fujitsu-Siemens/Toshiba-Notebooks.
The module fits the interfaces created by IBM and was patched against the
latest kernel-snapshot 2.6.13-rc1-mm1.
Further information about this module and a list of supported hardware can be
found here: http://www.prosec.rub.de/tpm
Best Regards,
Marcel Selhorst
Signed-off-by: Marcel Selhorst <[EMAIL PROTECTED]>
---
diff -uprN linux-2.6.13-rc1-mm1/drivers/char/tpm/Kconfig
linux-2.6.13-rc-mm1-tpm_inf/drivers/char/tpm/Kconfig
--- linux-2.6.13-rc1-mm1/drivers/char/tpm/Kconfig 2005-06-29
23:00:53.000000000 +0000
+++ linux-2.6.13-rc-mm1-tpm_inf/drivers/char/tpm/Kconfig 2005-07-05
10:12:20.000000000 +0000
@@ -35,5 +35,18 @@ config TCG_ATMEL
will be accessible from within Linux. To compile this driver
as a module, choose M here; the module will be called tpm_atmel.
+config TCG_INFINEON
+ tristate "Infineon Technologies SLD 9630 TPM Interface"
+ depends on TCG_TPM
+ ---help---
+ If you have a TPM security chip from Infineon Technologies
+ say Yes and it will be accessible from within Linux. To
+ compile this driver as a module, choose M here; the module
+ will be called tpm_infineon.
+ Further information on this driver and the supported hardware
+ can be found at http://www.prosec.rub.de/tpm
+ Note: To get debugging output into the module, you have to enable
+ CONFIG_DEBUG_KERNEL, CONFIG_DEBUG_INFO and CONFIG_PCI_DEBUG
+
endmenu
diff -uprN linux-2.6.13-rc1-mm1/drivers/char/tpm/Makefile
linux-2.6.13-rc-mm1-tpm_inf/drivers/char/tpm/Makefile
--- linux-2.6.13-rc1-mm1/drivers/char/tpm/Makefile 2005-06-29
23:00:53.000000000 +0000
+++ linux-2.6.13-rc-mm1-tpm_inf/drivers/char/tpm/Makefile 2005-07-05
10:12:20.000000000 +0000
@@ -4,4 +4,5 @@
obj-$(CONFIG_TCG_TPM) += tpm.o
obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
+obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
diff -uprN linux-2.6.13-rc1-mm1/drivers/char/tpm/tpm_infineon.c
linux-2.6.13-rc-mm1-tpm_inf/drivers/char/tpm/tpm_infineon.c
--- linux-2.6.13-rc1-mm1/drivers/char/tpm/tpm_infineon.c 1970-01-01
00:00:00.000000000 +0000
+++ linux-2.6.13-rc-mm1-tpm_inf/drivers/char/tpm/tpm_infineon.c 2005-07-05
14:35:19.000000000 +0000
@@ -0,0 +1,488 @@
+/*
+ * Copyright (C) 2005
+ * Marcel Selhorst <[EMAIL PROTECTED]>
+ * Applied Data Security Group
+ * Ruhr-University Bochum, Germany
+ *
+ * Description:
+ * Device Driver for the Infineon Technologies
+ * SLD 9630 TT Trusted Platform Module
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * Project-Homepage:
+ * http://www.prosec.rub.de/tpm
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ */
+
+#include "tpm.h"
+
+/* Infineon Specific Delay Definitions */
+enum tpm_delay_stuff {
+ TPM_MAX_WTX_PACKAGES = 50, /* Sets the maximum number of
WTX-Packages */
+ TPM_WTX_MSLEEP_TIME = 20, /* Sets the msleep-Time for
WTX-Packages */
+ TPM_MSLEEP_TIME = 3, /* msleep-Time --> Interval to check
status register */
+ TPM_MAX_TRIES = 5000 /* gives number of max. msleep()-calls
before
+throwing timeout */
+};
+
+/* Infineon Specific TPM Data */
+enum tpm_infineon_specific {
+ TCPA_INFINEON_DEV_VEN_VALUE = 0x15D1,
+ TPM_DATA = (TPM_ADDR+1) & 0xff
+};
+
+/* TPM Header stuff */
+enum tpm_infineon_header {
+ TPM_VL_VER = 0x01,
+ TPM_VL_CHANNEL_CONTROL = 0x07,
+ TPM_VL_CHANNEL_PERSONALISATION = 0x0A,
+ TPM_VL_CHANNEL_TPM = 0x0B,
+ TPM_VL_CONTROL = 0x00,
+ TPM_INF_NAK = 0x15,
+ TPM_CTRL_WTX = 0x10,
+ TPM_CTRL_WTX_ABORT = 0x18,
+ TPM_CTRL_WTX_ABORT_ACK = 0x18,
+ TPM_CTRL_ERROR = 0x20,
+ TPM_CTRL_CHAININGACK = 0x40,
+ TPM_CTRL_CHAINING = 0x80,
+ TPM_CTRL_DATA = 0x04,
+ TPM_CTRL_DATA_CHA = 0x84,
+ TPM_CTRL_DATA_CHA_ACK = 0xC4
+};
+
+/* Register */
+enum tpm_register {
+ WRFIFO = 0x00,
+ RDFIFO = 0x01,
+ STAT = 0x02,
+ CMD = 0x03
+};
+
+/* Command Bits */
+enum tpm_command_bits {
+ CMD_DIS = 0x00,
+ CMD_LP = 0x01,
+ CMD_RES = 0x02,
+ CMD_IRQC = 0x06
+};
+
+/* Status Bits */
+enum tpm_status_bits {
+ STAT_XFE = 0x00,
+ STAT_LPA = 0x01,
+ STAT_FOK = 0x02,
+ STAT_TOK = 0x03,
+ STAT_IRQA = 0x06,
+ STAT_RDA = 0x07
+};
+
+/* Some outgoing values */
+enum infineon_tpm_values {
+ CHIP_ID1 = 0x20,
+ CHIP_ID2 = 0x21,
+ DAR = 0x30,
+ RESET_LP_IRQC_DISABLE = 0x41,
+ ENABLE_REGISTER_PAIR = 0x55,
+ IOLIMH = 0x60,
+ IOLIML = 0x61,
+ DISABLE_REGISTER_PAIR = 0xAA,
+ IDVENL = 0xF1,
+ IDVENH = 0xF2,
+ IDPDL = 0xF3,
+ IDPDH = 0xF4
+};
+
+/* Global variable to count the Waiting-Time-Extensions */
+static int number_of_wtx = 0;
+
+static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) {
+ int status;
+ int check=0;
+ int i=0;
+ int j=0;
+
+ if (clear_wrfifo) {
+ for (i=0; i<4096; i++) {
+ status = inb(chip->vendor->base+WRFIFO);
+ if (status == 0xff) {
+ if (check==5)
+ break;
+ else
+ check++;
+ }
+ }
+ }
+ /* Note: The Values which are currently in the FIFO of the TPM
+ are thrown away since there is no usage for them. Usually,
+ this has nothing to say, since the TPM will give its answer immidiately
+ or will be aborted anyway, so the data here is usually garbage and
useless.
+ We have to clean this, because the next communication with the TPM would
+ be rubbish, if there is still some old data in the Read FIFO.
+ */
+ i = 0;
+ do {
+ status = inb(chip->vendor->base+RDFIFO);
+ status = inb(chip->vendor->base+STAT);
+ j++;
+ if (j==TPM_MAX_TRIES)
+ return -EIO;
+ } while ((status & (1<<STAT_RDA)) != 0);
+ return(0);
+}
+
+static int wait(struct tpm_chip *chip, int wait_for_bit) {
+
+ int status;
+ int i = 0;
+ for (i = 0; i < TPM_MAX_TRIES; i++) { /* Check the
TPM_TIMEOUT-Variable in the definitions in Infineon.h */
+ status = inb(chip->vendor->base + STAT);
+ if (status & 1<<wait_for_bit) /* Check the Status-Register
for the XFE-Bit */
+ break;
+ msleep(TPM_MSLEEP_TIME);
+ }
+ if (i == TPM_MAX_TRIES) { /* In Case of an error, print
information */
+ dev_err(&chip->pci_dev->dev,": Timeout in wait(");
+ if (wait_for_bit==STAT_XFE) dev_err(&chip->pci_dev->dev,"STAT_XFE)\n");
+ if (wait_for_bit==STAT_RDA) dev_err(&chip->pci_dev->dev,"STAT_RDA)\n");
+ return -EIO;
+ }
+ return(0);
+};
+
+static void wait_and_send(struct tpm_chip *chip, u8 sendbyte) {
+ wait(chip,STAT_XFE);
+ outb(sendbyte,chip->vendor->base+WRFIFO);
+}
+
+/* Note: WTX means Waiting-Time-Extension. Whenever the TPM
+needs more calculation time, it sends a WTX-package, which has to
+be acknowledged or aborted. This usually occurs if you are hammering
+the TPM with key creation. Set the maximum number of WTX-packages in
+the definitions above, if the number is reached, the Waiting-Time will be
denied
+and the TPM command has to be resend.
+*/
+
+static void tpm_wtx(struct tpm_chip *chip) {
+ number_of_wtx++;
+ dev_info(&chip->pci_dev->dev,": Granting WTX (%02d /
%02d)\n",number_of_wtx,TPM_MAX_WTX_PACKAGES);
+ wait_and_send(chip,TPM_VL_VER);
+ wait_and_send(chip,TPM_CTRL_WTX);
+ wait_and_send(chip,0x00);
+ wait_and_send(chip,0x00);
+ msleep(TPM_WTX_MSLEEP_TIME);
+}
+
+static void tpm_wtx_abort(struct tpm_chip *chip) {
+ dev_info(&chip->pci_dev->dev,": Sending WTX Abort\n");
+ wait_and_send(chip,TPM_VL_VER);
+ wait_and_send(chip,TPM_CTRL_WTX_ABORT);
+ wait_and_send(chip,0x00);
+ wait_and_send(chip,0x00);
+ number_of_wtx = 0;
+ dev_info(&chip->pci_dev->dev,": Waiting for Abort-Acknowledge\n");
+ msleep(TPM_WTX_MSLEEP_TIME);
+}
+
+static int tpm_inf_recv(struct tpm_chip *chip, u8 *buf, size_t count) {
+ int i;
+ int ret;
+ u32 size = 0;
+
+recv_begin:
+ /* start reading header */
+ dev_dbg(&chip->pci_dev->dev,": Receiving Header: ");
+
+ for (i=0; i<4 ; i++) {
+ ret = wait(chip,STAT_RDA);
+ if (ret)
+ return -EIO;
+
+ buf[i]=inb(chip->vendor->base+RDFIFO);
+ dev_dbg(&chip->pci_dev->dev,"%02x ",buf[i]);
+ }
+ dev_dbg(&chip->pci_dev->dev,"\n");
+
+ if (buf[0] != TPM_VL_VER) {
+ dev_err(&chip->pci_dev->dev,": Wrong Transport Protol
Implementation!\n");
+ return -EIO;
+ }
+
+ if (buf[1] == TPM_CTRL_DATA) {
+ /* size of the data received */
+ size = ((buf[2] << 8) | buf[3]);
+ dev_dbg(&chip->pci_dev->dev,": Number of Bytes to Copy: %d
(0x%04x)\n",size,size);
+ dev_dbg(&chip->pci_dev->dev,": Receiving Data-Bytes: ");
+
+ for (i=0; i<size; i++) {
+ wait(chip,STAT_RDA);
+ buf[i]=inb(chip->vendor->base+RDFIFO);
+ dev_dbg(&chip->pci_dev->dev,"%02x ",buf[i]);
+ }
+ dev_dbg(&chip->pci_dev->dev,"\n");
+
+ if ((size == 0x6D00) && (buf[1] == 0x80)) {
+ dev_err(&chip->pci_dev->dev,": Error Handling on
Vendor-Layer!\n");
+ return -EIO;
+ }
+
+ for (i=0;i<size;i++)
+ buf[i]=buf[i+6];
+
+ size=size-6;
+ return (size);
+ }
+
+ if (buf[1] == TPM_CTRL_WTX) {
+ dev_info(&chip->pci_dev->dev,": WTX-package received\n");
+ if (number_of_wtx < TPM_MAX_WTX_PACKAGES) {
+ tpm_wtx(chip);
+ goto recv_begin;
+ } else {
+ tpm_wtx_abort(chip);
+ goto recv_begin;
+ }
+ }
+ if (buf[1] == TPM_CTRL_WTX_ABORT_ACK) {
+ dev_info(&chip->pci_dev->dev,": WTX-Abort-Acknowledgement-package
received\n");
+ return size;
+ }
+
+ if (buf[1] == TPM_CTRL_ERROR) {
+ dev_err(&chip->pci_dev->dev,": ERROR-package received:\n");
+ if (buf[4] == TPM_INF_NAK)
+ dev_err(&chip->pci_dev->dev,": -> Negative Acknowledgement -
Please retransmit commando!\n");
+ return -EIO;
+ }
+ return -EIO;
+}
+
+static int tpm_inf_send(struct tpm_chip *chip, u8 *buf, size_t count) {
+ int i;
+ int ret;
+ u8 count_high,count_low,count_4,count_3,count_2,count_1;
+ /* Disabling Reset, LP and IRQC */
+ outb(RESET_LP_IRQC_DISABLE,chip->vendor->base+CMD);
+
+ ret = empty_fifo(chip,1);
+ if (ret) {
+ dev_err(&chip->pci_dev->dev,"Timeout while clearing FIFOs\n");
+ return -EIO;
+ }
+
+ ret = wait(chip,STAT_XFE);
+ if (ret)
+ return -EIO;
+
+ count_4=(count & 0xff000000)>>24;
+ count_3=(count & 0x00ff0000)>>16;
+ count_2=(count & 0x0000ff00)>>8;
+ count_1=(count & 0x000000ff);
+ count_high = ((count+6) & 0xffffff00)>>8;
+ count_low = ((count+6) & 0x000000ff);
+
+ /* Sending Header */
+ dev_dbg(&chip->pci_dev->dev,": Sending Header %02x %02x %02x
%02x\n",TPM_VL_VER,TPM_CTRL_DATA,count_high,count_low);
+
+ wait_and_send(chip,TPM_VL_VER);
+ wait_and_send(chip,TPM_CTRL_DATA);
+ wait_and_send(chip,count_high);
+ wait_and_send(chip,count_low);
+
+ count_high=0;
+ count_low=0;
+
+ count_high = (count & 0xffff0000);
+ count_low = (count & 0x0000ffff);
+
+ /* Sending Data Header */
+ dev_dbg(&chip->pci_dev->dev,": Sending Data %02x %02x %02x %02x %02x
%02x ",TPM_VL_VER,TPM_VL_CHANNEL_TPM,count_4,count_3,count_2,count_1);
+
+ wait_and_send(chip,TPM_VL_VER);
+ wait_and_send(chip,TPM_VL_CHANNEL_TPM);
+ wait_and_send(chip,count_4);
+ wait_and_send(chip,count_3);
+ wait_and_send(chip,count_2);
+ wait_and_send(chip,count_1);
+
+ for (i = 0; i < count; i++) {
+ wait_and_send(chip,buf[i]);
+ dev_dbg(&chip->pci_dev->dev,"%02x ",buf[i]);
+ }
+ dev_dbg(&chip->pci_dev->dev,"\n");
+ dev_dbg(&chip->pci_dev->dev,": Sending Data successful -> %d (0x%04x)
from %d (0x%04x) Data-Bytes written\n",count,count,i,i);
+ return count;
+}
+static void tpm_inf_cancel(struct tpm_chip *chip) {
+ /* Nothing yet!
+ This has something to do with the internal functions
+ of the TPM. Abort isn't really necessary...
+ */
+}
+
+static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
+static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
+static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL);
+static DEVICE_ATTR(cancel, S_IWUSR|S_IWGRP, NULL, tpm_store_cancel);
+
+static struct attribute * inf_attrs[] = {
+ &dev_attr_pubek.attr,
+ &dev_attr_pcrs.attr,
+ &dev_attr_caps.attr,
+ &dev_attr_cancel.attr,
+ 0,
+};
+
+static struct attribute_group inf_attr_grp = { .attrs = inf_attrs };
+
+static struct file_operations inf_ops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = tpm_open,
+ .read = tpm_read,
+ .write = tpm_write,
+ .release = tpm_release,
+};
+
+static struct tpm_vendor_specific tpm_inf = {
+ .recv = tpm_inf_recv,
+ .send = tpm_inf_send,
+ .cancel = tpm_inf_cancel,
+ .req_complete_mask = 0,
+ .req_complete_val = 0,
+ .attr_group = &inf_attr_grp,
+ .miscdev = { .fops = &inf_ops, },
+};
+
+int __init tpm_inf_probe(struct pci_dev *pci_dev, const struct pci_device_id
*pci_id) {
+
+ int rc = 0;
+ u8 ioh;
+ u8 iol;
+ int vendor[4];
+ int version[2];
+ int status = 0;
+
+ if (pci_enable_device(pci_dev))
+ return -EIO;
+
+ dev_dbg(&pci_dev->dev,": LPC-Bus found at 0x%x\n",pci_id->device);
+
+ /* query chip for its vendor, its version number a.s.o. */
+
+ outb(ENABLE_REGISTER_PAIR, TPM_ADDR);
+ outb(IDVENL, TPM_ADDR);
+ vendor[1] = inb(TPM_DATA) ;
+ outb(IDVENH, TPM_ADDR);
+ vendor[0] = inb(TPM_DATA) ;
+ outb(IDPDL, TPM_ADDR);
+ vendor[3] = inb(TPM_DATA) ;
+ outb(IDPDH, TPM_ADDR);
+ vendor[2] = inb(TPM_DATA) ;
+ outb(CHIP_ID1, TPM_ADDR);
+ version[1] = inb(TPM_DATA) ;
+ outb(CHIP_ID2, TPM_ADDR);
+ version[0] = inb(TPM_DATA) ;
+
+ if ((vendor[1] == (TCPA_INFINEON_DEV_VEN_VALUE & 0xFF)) && ((vendor[0]
<< 8) == (TCPA_INFINEON_DEV_VEN_VALUE & 0x00FF << 8))) {
+
+ /* Read IOPorts from TPM */
+ outb(IOLIMH, TPM_ADDR);
+ ioh = inb(TPM_DATA);
+ dev_dbg(&pci_dev->dev,": Current Values in IOLIMH: %02x\n",ioh);
+ outb(IOLIML, TPM_ADDR);
+ iol = inb(TPM_DATA);
+ dev_dbg(&pci_dev->dev,": Current Values in IOLIML: %02x\n",iol);
+ tpm_inf.base = (ioh<<8) | iol;
+
+ if (tpm_inf.base == 0) {
+ dev_err(&pci_dev->dev,": No IO-Ports set!\n");
+ pci_disable_device(pci_dev);
+ return -ENODEV;
+ }
+
+ /* Activate Register */
+ outb(DAR,TPM_ADDR);
+ outb(0x01,TPM_DATA);
+ outb(DAR,TPM_ADDR);
+ status = inb (TPM_DATA);
+ dev_dbg(&pci_dev->dev,": Device Activate Register Status : %x
\n",status);
+ outb(DISABLE_REGISTER_PAIR, TPM_ADDR);
+
+ /* Disabling reset, LP and IRQC */
+ outb(RESET_LP_IRQC_DISABLE,tpm_inf.base+CMD);
+ dev_dbg(&pci_dev->dev,": Disabling Reset, LP and IRQC\n");
+ dev_dbg(&pci_dev->dev,": Setting WRFIFO:
%04x\n",tpm_inf.base+WRFIFO);
+ dev_dbg(&pci_dev->dev,": Setting RDFIFO:
%04x\n",tpm_inf.base+RDFIFO);
+ dev_dbg(&pci_dev->dev,": Setting STAT : %04x\n",tpm_inf.base+STAT);
+ dev_dbg(&pci_dev->dev,": Setting CMD : %04x\n",tpm_inf.base+CMD);
+
+ /* Finally, we're done, print some infos */
+
dev_info(&pci_dev->dev,"************************************************\n");
+ dev_info(&pci_dev->dev,"* TPM found with IO-Base 0x%x
*\n",tpm_inf.base);
+ dev_info(&pci_dev->dev,"* Chip ID %02x%02x
*\n",version[0], version[1]);
+ dev_info(&pci_dev->dev,"* Vendor ID %x%x (Infineon)
*\n",vendor[0], vendor[1]);
+ if ((vendor[2] == 0) && (vendor[3] == 6))
+ dev_info(&pci_dev->dev,"* Product ID %02x%02x (SLD 9630 TT
1.1) *\n",vendor[2],vendor[3]);
+ else
+ dev_info(&pci_dev->dev,"* Product ID %02x%02x
*\n",vendor[2],vendor[3]);
+
dev_info(&pci_dev->dev,"************************************************\n");
+
+ /* Let's register our hardware */
+ dev_dbg(&pci_dev->dev,"Registering TPM-Infineon-Driver: %x\n",rc);
+ rc = tpm_register_hardware(pci_dev, &tpm_inf);
+ if (rc < 0) {
+ pci_disable_device(pci_dev);
+ return -ENODEV;
+ }
+ return 0;
+
+ } else {
+ dev_err(&pci_dev->dev,": No Infineon TPM found! Sorry! \n");
+ pci_disable_device(pci_dev);
+ return -ENODEV;
+ }
+}
+
+static struct pci_device_id tpm_pci_tbl [] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2)},
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
+
+static struct pci_driver inf_pci_driver = {
+ .name = "tpm_inf",
+ .id_table = tpm_pci_tbl,
+ .probe = tpm_inf_probe,
+ .remove = __devexit_p(tpm_remove),
+ .suspend = tpm_pm_suspend,
+ .resume = tpm_pm_resume,
+};
+
+static int __init init_inf(void) {
+ return pci_register_driver(&inf_pci_driver);
+}
+
+static void __exit cleanup_inf(void) {
+ pci_unregister_driver(&inf_pci_driver);
+}
+
+module_init(init_inf);
+module_exit(cleanup_inf);
+
+MODULE_AUTHOR("Marcel Selhorst ([EMAIL PROTECTED])");
+MODULE_DESCRIPTION("Infineon TPM Driver");
+MODULE_VERSION("1.4");
+MODULE_LICENSE("GPL");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
