This series enables RTC on the at91sam9n12 and at91rm9200. It also adds nodes for the SRAM availabe on at91 SoCs.
Finally it adds a dtsi for the at91sam9xe and uses it for the ethernut5 dts. Changes in v3: - corrected the 9260 and 9g20 reg properties of the SRAM node Changes in v2: - remove the 9x5 errata for the n12 rtc Alexandre Belloni (6): ARM: at91/dt: at91sam9n12: Add RTC node ARM: at91/dt: rm9200: add RTC node ARM: at91/dt: at91rm9200ek: enable RTC ARM: at91/dt: add SRAM nodes ARM: at91/dt: Add a dtsi for at91sam9xe ARM: at91/dt: ethernut5: use at91sam9xe.dtsi .../devicetree/bindings/arm/atmel-at91.txt | 1 + arch/arm/boot/dts/at91rm9200.dtsi | 12 +++++ arch/arm/boot/dts/at91rm9200ek.dts | 4 ++ arch/arm/boot/dts/at91sam9260.dtsi | 5 ++ arch/arm/boot/dts/at91sam9261.dtsi | 5 ++ arch/arm/boot/dts/at91sam9263.dtsi | 10 ++++ arch/arm/boot/dts/at91sam9g20.dtsi | 9 ++++ arch/arm/boot/dts/at91sam9g45.dtsi | 7 ++- arch/arm/boot/dts/at91sam9n12.dtsi | 12 +++++ arch/arm/boot/dts/at91sam9rl.dtsi | 5 ++ arch/arm/boot/dts/at91sam9x5.dtsi | 5 ++ arch/arm/boot/dts/at91sam9xe.dtsi | 60 ++++++++++++++++++++++ arch/arm/boot/dts/ethernut5.dts | 2 +- arch/arm/boot/dts/sama5d3.dtsi | 5 ++ arch/arm/boot/dts/sama5d4.dtsi | 5 ++ 15 files changed, 144 insertions(+), 3 deletions(-) create mode 100644 arch/arm/boot/dts/at91sam9xe.dtsi -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
