At Wed, 14 Jan 2015 11:00:47 +0100, Lars-Peter Clausen wrote: > > On 01/14/2015 09:47 AM, Takashi Iwai wrote: > > At Wed, 14 Jan 2015 09:15:36 +0100, > > Lars-Peter Clausen wrote: > >> > >> On 01/14/2015 08:43 AM, Takashi Iwai wrote: > >>> At Tue, 13 Jan 2015 21:54:12 +0000, > >>> Mark Brown wrote: > >>>> > >>>> On Tue, Jan 13, 2015 at 06:24:44PM +0100, Takashi Iwai wrote: > >>>>> Wang, Jiada (ESD) wrote: > >>>> > >>>>>> I am using i.MX6Q sabreSD board, which have imx_wm892 machine driver, > >>>>>> wm8962 codec and SSI CPU DAI, > >>>> > >>>>>> I got Kernel crash when unloading audio drivers (playback stream is > >>>>>> active) > >>>>>> modprobe -r snd_soc_imx_wm8962 > >>>>>> modprobe -r snd_soc_fsl_ssi > >>>>>> modprobe -r snd_soc_wm8962 > >>>> > >>>>> The root problem is that you can unload the module while playing. > >>>>> The corresponding module refcounts should have been increased during > >>>>> used. > >>>> > >>>>> Do we miss [try_]module_get() somewhere in ASoC? > >>>> > >>>> That doesn't help, users can still forcibly unbind the driver at runtime > >>>> without loading the module - and there's always the potential for > >>>> actually hotpluggable hardware. The teardown paths should be able to > >>>> cope somewhat gracefully. > >>> > >>> The module refcount has to be handled while being used for stopping > >>> module unload. That's irrelevant from the dynamic unbinding support > >>> itself. Of course, the module refcount doesn't save the world, but > >>> it's the right fix for this particular scenario. > >> > >> Refcounting won't help in this case. The issue is caused by a delayed work > >> item that gets launched when the PCM stream is stopped. So if you decrease > >> the refcount when the stream is stopped you still have a window where it is > >> possible to remove the module while the work is still being scheduled. > > > > OK, so it's not about active stream. From the reporter's description, > > I supposed that the module gets unloaded while playing a stream, which > > shouldn't be allowed. > > Well one of the ways to trigger this is to remove the module while the > stream is active. But it is not exclusively a problem module unload problem. > E.g. the same happens if you hot-unplug the ASoC card.
Yes, unbinding can trigger a similar problem, ends up the same bad code path. > I don't think that we need to prevent module unload when a stream is active. > From a framework point of view is not different from hot-unplug. I don't > see a reason why we'd jump through hoops to actively forbid removing the > module once it works just fine. Well, the module unload means a more drastic cleanup. Even if you unbind, the code and data are still there while module unload may clean them up all. Above all, disallowing the module unload while using is the common behavior of any other drivers. Why do we have to be a rebel against all civil manner? :) Takashi -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/