The Kconfig symbol DEBUG_MVEBU_UART_ALTERNATE was renamed to
DEBUG_MVEBU_UART0_ALTERNATE. And the symbol DEBUG_MVEBU_UART1_ALTERNATE
was added to allow UART1 as a DEBUG_LL target. Make the comment at the
top of this DTS reflect those changes.
Since we're touching this DTS add comments to show which blocks describe
UART0 and UART1.
Signed-off-by: Paul Bolle <pebo...@tiscali.nl>
---
Created on top of next-20150119. Untested! Note that I know nothing
about this board or about DT source files, so all changes are nothing
more than guesses.
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index ca0200e20751..28174ab019f9 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -3,8 +3,8 @@
*
* Note: this board is shipped with a new generation boot loader that
* remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
- * used.
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
+ * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
*
* Copyright (C) 2013 Marvell
*
@@ -60,10 +60,12 @@
};
internal-regs {
+ /* UART0 */
serial@12000 {
status = "okay";
};
+ /* UART1 */
serial@12100 {
status = "okay";
};
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
