Hi Chunyan,
Just the minor fix to zeroing the stack local in sprd_set_termios()
and using dev_get_drvdata() in sprd_suspend()/sprd_resume().
Regards,
Peter Hurley
On 01/23/2015 08:01 AM, Chunyan Zhang wrote:
> Add a full sc9836-uart driver for SC9836 SoC which is based on the
> spreadtrum sharkl64 platform.
> This driver also support earlycon.
[...]
> +static void sprd_set_termios(struct uart_port *port,
> + struct ktermios *termios,
> + struct ktermios *old)
> +{
> + unsigned int baud, quot;
> + unsigned int lcr, fc;
unsigned int lcr = 0, fc;
> + unsigned long flags;
> +
> + /* ask the core to calculate the divisor for us */
> + baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
> +
> + quot = (unsigned int)((port->uartclk + baud / 2) / baud);
> +
> + /* set data length */
> + switch (termios->c_cflag & CSIZE) {
> + case CS5:
> + lcr |= SPRD_LCR_DATA_LEN5;
> + break;
> + case CS6:
> + lcr |= SPRD_LCR_DATA_LEN6;
> + break;
> + case CS7:
> + lcr |= SPRD_LCR_DATA_LEN7;
> + break;
> + case CS8:
> + default:
> + lcr |= SPRD_LCR_DATA_LEN8;
> + break;
> + }
> +
> + /* calculate stop bits */
> + lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
> + if (termios->c_cflag & CSTOPB)
> + lcr |= SPRD_LCR_STOP_2BIT;
> + else
> + lcr |= SPRD_LCR_STOP_1BIT;
> +
> + /* calculate parity */
> + lcr &= ~SPRD_LCR_PARITY;
> + termios->c_cflag &= ~CMSPAR; /* no support mark/space */
> + if (termios->c_cflag & PARENB) {
> + lcr |= SPRD_LCR_PARITY_EN;
> + if (termios->c_cflag & PARODD)
> + lcr |= SPRD_LCR_ODD_PAR;
> + else
> + lcr |= SPRD_LCR_EVEN_PAR;
> + }
[...]
> +static int sprd_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + struct uart_port *up;
> + struct clk *clk;
> + int irq;
> + int index;
> + int ret;
> +
> + for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
> + if (sprd_port[index] == NULL)
> + break;
> +
> + if (index == ARRAY_SIZE(sprd_port))
> + return -EBUSY;
> +
> + index = sprd_probe_dt_alias(index, &pdev->dev);
> +
> + sprd_port[index] = devm_kzalloc(&pdev->dev,
> + sizeof(*sprd_port[index]), GFP_KERNEL);
> + if (!sprd_port[index])
> + return -ENOMEM;
> +
> + pdev->id = index;
see my recent reply regarding this and sprd_suspend/sprd_resume.
> +
> + up = &sprd_port[index]->port;
> + up->dev = &pdev->dev;
> + up->line = index;
> + up->type = PORT_SPRD;
> + up->iotype = SERIAL_IO_PORT;
> + up->uartclk = SPRD_DEF_RATE;
> + up->fifosize = SPRD_FIFO_SIZE;
> + up->ops = &serial_sprd_ops;
> + up->flags = UPF_BOOT_AUTOCONF;
> +
> + clk = devm_clk_get(&pdev->dev, NULL);
> + if (!IS_ERR(clk))
> + up->uartclk = clk_get_rate(clk);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "not provide mem resource\n");
> + return -ENODEV;
> + }
> + up->mapbase = res->start;
> + up->membase = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(up->membase))
> + return PTR_ERR(up->membase);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "not provide irq resource\n");
> + return -ENODEV;
> + }
> + up->irq = irq;
> +
> + if (!sprd_ports_num) {
> + ret = uart_register_driver(&sprd_uart_driver);
> + if (ret < 0) {
> + pr_err("Failed to register SPRD-UART driver\n");
> + return ret;
> + }
> + }
> + sprd_ports_num++;
> +
> + ret = uart_add_one_port(&sprd_uart_driver, up);
> + if (ret) {
> + sprd_port[index] = NULL;
> + sprd_remove(pdev);
> + }
> +
> + platform_set_drvdata(pdev, up);
> +
> + return ret;
> +}
> +
> +static int sprd_suspend(struct device *dev)
> +{
> + int id = to_platform_device(dev)->id;
> + struct uart_port *port = &sprd_port[id]->port;
> +
> + uart_suspend_port(&sprd_uart_driver, port);
same comment: see my recent reply using dev_get_drvdata().
> +
> + return 0;
> +}
> +
> +static int sprd_resume(struct device *dev)
> +{
> + int id = to_platform_device(dev)->id;
> + struct uart_port *port = &sprd_port[id]->port;
> +
> + uart_resume_port(&sprd_uart_driver, port);
> +
> + return 0;
> +}
> +
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
