On 26/01/15 10:40, Lars-Peter Clausen wrote: > On 01/26/2015 11:18 AM, Zubair Lutfullah Kakakhel wrote: >> As we are moving away from platform to DT, we cant rely on the board >> file to do this now. So enable it here. > > I don't understand this changelog. The board file never did this. The driver > enables the clock in the startup() callback.
My bad. I couldn't get the ci20 audio to work without this change. I double checked. The clock is indeed enabled. But the rate needs to be set for the ci20. clk_set_rate(i2s->clk_i2s, 12000000); Where should I put it? I couldn’t trace how the rate is set for the jz4740.. ZubairLK > >> >> Signed-off-by: Zubair Lutfullah Kakakhel <[email protected]> >> --- >> sound/soc/jz4740/jz4740-i2s.c | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c >> index 3c309fc..a7e4a7b 100644 >> --- a/sound/soc/jz4740/jz4740-i2s.c >> +++ b/sound/soc/jz4740/jz4740-i2s.c >> @@ -376,6 +376,10 @@ static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai) >> JZ_AIC_CONF_I2S | >> JZ_AIC_CONF_INTERNAL_CODEC; >> >> + /* enable codec sysclk */ >> + clk_set_rate(i2s->clk_i2s, 12000000); >> + clk_prepare_enable(i2s->clk_i2s); >> + >> jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, JZ_AIC_CONF_RESET); >> jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf); >> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
