On Fri, Jan 23, 2015 at 03:28:33PM +0900, gyun...@gmail.com wrote:
> From: Gyungoh Yoo <jack....@skyworksinc.com>
> 
> Signed-off-by: Gyungoh Yoo <jack....@skyworksinc.com>
> Acked-by: Bryan Wu <coolo...@gmail.com>

The existing Ack is only for backlight driver.

DT Ack please.

> ---
> Changes v10:
> Nothing
> 
> Changes v9:
> Nothing
> 
> Changes v8:
> Renamed property names for backlight with vendor prefix
> Modified gpio-enable property to generic property for GPIO
> Made up the example for backlight DT
> 
> Changes v7:
> Nothing
> 
> Changes v6:
> Nothing
> 
> Changes v5:
> Nothing
> 
> Changes v4:
> Nothing
> 
> Changes v3:
> Nothing
> 
> Changes v2:
> Added reg attribute for I2C slave address
> 
>  .../video/backlight/sky81452-backlight.txt         | 29 
> ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
> 
> diff --git 
> a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt 
> b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
> new file mode 100644
> index 0000000..8daebf5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
> @@ -0,0 +1,29 @@
> +SKY81452-backlight bindings
> +
> +Required properties:
> +- compatible         : Must be "skyworks,sky81452-backlight"
> +
> +Optional properties:
> +- name                       : Name of backlight device. Default is 
> 'lcd-backlight'.
> +- gpios                      : GPIO to use to EN pin.
> +                     See Documentation/devicetree/bindings/gpio/gpio.txt
> +- skyworks,en-channels       : Enable mask for current sink channel 1 to 6.
> +- skyworks,ignore-pwm        : Ignore both PWM input
> +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming.
> +- skyworks,phase-shift       : Enable phase shift mode
> +- skyworks,ovp-level : Over-voltage protection level.
> +                     Should be between 14 or 28V.
> +- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V.
> +- skyworks,current-limit     : It should be 2300mA or 2750mA.
> +
> +Example:
> +
> +     backlight {
> +             compatible = "skyworks,sky81452-backlight";
> +             name = "pwm-backlight";
> +             skyworks,en-channels = <0x3f>;
> +             skyworks,ignore-pwm;
> +             skyworks,phase-shift;
> +             skyworks,ovp-level = <20>;
> +             skyworks,current-limit = <2300>;
> +     };
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to