The USB controller/phy clocks and reset controls are in a separate
address block, unlike previous SoCs where they were in the clock
controller. Also, access to the address block is controlled by a
clock gate to AHB.
Add support for resets requiring a clock to be enabled when
asserting/deasserting the reset controls, and add the sun9i USB
clocks.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 2 ++
drivers/clk/sunxi/clk-usb.c | 43 +++++++++++++++++++++++
2 files changed, 45 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt
b/Documentation/devicetree/bindings/clock/sunxi.txt
index 60b44285250d..3f1dcd879af7 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -66,6 +66,8 @@ Required properties:
"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
+ "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
+ "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
Required properties for all clocks:
- reg : shall be the control register address for the clock.
diff --git a/drivers/clk/sunxi/clk-usb.c b/drivers/clk/sunxi/clk-usb.c
index f1dcc8fb5a7d..a86ed2f8d7af 100644
--- a/drivers/clk/sunxi/clk-usb.c
+++ b/drivers/clk/sunxi/clk-usb.c
@@ -29,6 +29,7 @@
struct usb_reset_data {
void __iomem *reg;
spinlock_t *lock;
+ struct clk *clk;
struct reset_controller_dev rcdev;
};
@@ -41,12 +42,14 @@ static int sunxi_usb_reset_assert(struct
reset_controller_dev *rcdev,
unsigned long flags;
u32 reg;
+ clk_prepare_enable(data->clk);
spin_lock_irqsave(data->lock, flags);
reg = readl(data->reg);
writel(reg & ~BIT(id), data->reg);
spin_unlock_irqrestore(data->lock, flags);
+ clk_disable_unprepare(data->clk);
return 0;
}
@@ -60,12 +63,14 @@ static int sunxi_usb_reset_deassert(struct
reset_controller_dev *rcdev,
unsigned long flags;
u32 reg;
+ clk_prepare_enable(data->clk);
spin_lock_irqsave(data->lock, flags);
reg = readl(data->reg);
writel(reg | BIT(id), data->reg);
spin_unlock_irqrestore(data->lock, flags);
+ clk_disable_unprepare(data->clk);
return 0;
}
@@ -84,6 +89,7 @@ static struct reset_control_ops sunxi_usb_reset_ops = {
struct usb_clk_data {
u32 clk_mask;
u32 reset_mask;
+ bool reset_needs_clk;
};
static void __init sunxi_usb_clk_setup(struct device_node *node,
@@ -146,6 +152,15 @@ static void __init sunxi_usb_clk_setup(struct device_node
*node,
if (!reset_data)
return;
+ if (data->reset_needs_clk) {
+ reset_data->clk = of_clk_get(node, 0);
+ if (IS_ERR(reset_data->clk)) {
+ pr_err("Could not get clock for reset controls\n");
+ kfree(reset_data);
+ return;
+ }
+ }
+
reset_data->reg = reg;
reset_data->lock = lock;
reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1;
@@ -188,3 +203,31 @@ static void __init sun6i_a31_usb_setup(struct device_node
*node)
sunxi_usb_clk_setup(node, &sun6i_a31_usb_clk_data, &sun4i_a10_usb_lock);
}
CLK_OF_DECLARE(sun6i_a31_usb, "allwinner,sun6i-a31-usb-clk",
sun6i_a31_usb_setup);
+
+static const struct usb_clk_data sun9i_a80_usb_mod_data __initconst = {
+ .clk_mask = BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1),
+ .reset_mask = BIT(19) | BIT(18) | BIT(17),
+ .reset_needs_clk = 1,
+};
+
+static DEFINE_SPINLOCK(a80_usb_mod_lock);
+
+static void __init sun9i_a80_usb_mod_setup(struct device_node *node)
+{
+ sunxi_usb_clk_setup(node, &sun9i_a80_usb_mod_data, &a80_usb_mod_lock);
+}
+CLK_OF_DECLARE(sun9i_a80_usb_mod, "allwinner,sun9i-a80-usb-mod-clk",
sun9i_a80_usb_mod_setup);
+
+static const struct usb_clk_data sun9i_a80_usb_phy_data __initconst = {
+ .clk_mask = BIT(10) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1),
+ .reset_mask = BIT(21) | BIT(20) | BIT(19) | BIT(18) | BIT(17),
+ .reset_needs_clk = 1,
+};
+
+static DEFINE_SPINLOCK(a80_usb_phy_lock);
+
+static void __init sun9i_a80_usb_phy_setup(struct device_node *node)
+{
+ sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock);
+}
+CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk",
sun9i_a80_usb_phy_setup);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
