The commit "ARM: pxa: arbitrarily set first interrupt number" changed the first pxa interrupt to 16.
As a consequence, device-tree builds got broken, because : - pxa_mask_irq() and pxa_unmask_irq() are using IRQ_BIT() - IRQ_BIT(x) calculates the interrupts as : x - PXA_IRQ(0) Before the commit, the first interrupt shift, PXA_IRQ(0) was 0, therefore IRQ_BIT(x) was x. After the change, it is necessary that the same shift of 16 is applied between the virtual interrupt number and the hardware irq number. This situation comes from the common irq_chip shared between legacy platform builds and device-tree builds. Fix the broken interrupts in DT case by adding this shift in the DT case too. Signed-off-by: Robert Jarzmik <[email protected]> --- arch/arm/mach-pxa/irq.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 0eecd83..59a9351 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -214,10 +214,10 @@ static int pxa_irq_map(struct irq_domain *h, unsigned int virq, if (cpu_has_ipr) __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw)); - irq_set_chip_and_handler(hw, &pxa_internal_irq_chip, + irq_set_chip_and_handler(virq, &pxa_internal_irq_chip, handle_level_irq); - irq_set_chip_data(hw, base); - set_irq_flags(hw, IRQF_VALID); + irq_set_chip_data(virq, base); + set_irq_flags(virq, IRQF_VALID); return 0; } @@ -267,7 +267,8 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)) return; } - pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, 0, 0, + pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, + PXA_IRQ(0), 0, &pxa_irq_ops, NULL); if (!pxa_irq_domain) panic("Unable to add PXA IRQ domain\n"); -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
