Hi,
On Sun, Feb 1, 2015 at 3:17 PM, Maxime Ripard
<maxime.rip...@free-electrons.com> wrote:
> On Wed, Jan 28, 2015 at 03:54:11AM +0800, Chen-Yu Tsai wrote:
>> The A80 has 3 EHCI/OHCI USB controllers.
>>
>> Signed-off-by: Chen-Yu Tsai <w...@csie.org>
>> ---
>> arch/arm/boot/dts/sun9i-a80.dtsi | 70
>> ++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 70 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi
>> b/arch/arm/boot/dts/sun9i-a80.dtsi
>> index d7ebd9390b01..9483b15bfda7 100644
>> --- a/arch/arm/boot/dts/sun9i-a80.dtsi
>> +++ b/arch/arm/boot/dts/sun9i-a80.dtsi
>> @@ -355,6 +355,28 @@
>> */
>> ranges = <0 0 0 0x20000000>;
>>
>> + ehci0: usb@00a00000 {
>> + compatible = "allwinner,sun9i-a80-ehci",
>> "generic-ehci";
>> + reg = <0x00a00000 0x100>;
>> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&usb_mod_clk 1>;
>> + resets = <&usb_mod_clk 17>;
>> + phys = <&usbphy1>;
>> + phy-names = "usb";
>> + status = "disabled";
>> + };
>> +
>> + ohci0: usb@00a00400 {
>> + compatible = "allwinner,sun9i-a80-ohci",
>> "generic-ohci";
>> + reg = <0x00a00400 0x100>;
>> + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
>> + resets = <&usb_mod_clk 17>;
>> + phys = <&usbphy1>;
>> + phy-names = "usb";
>> + status = "disabled";
>> + };
>> +
>> usbphy1: phy@00a00800 {
>> compatible = "allwinner,sun9i-a80-usb-phy";
>> reg = <0x00a00800 0x4>;
>> @@ -366,6 +388,32 @@
>> #phy-cells = <0>;
>> };
>>
>> + ehci1: usb@00a01000 {
>> + compatible = "allwinner,sun9i-a80-ehci",
>> "generic-ehci";
>> + reg = <0x00a01000 0x100>;
>> + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&usb_mod_clk 3>;
>> + resets = <&usb_mod_clk 18>;
>> + phys = <&usbphy2>;
>> + phy-names = "usb";
>> + status = "disabled";
>> + };
>> +
>> + /*
>> + * Even though ohci1 exists, it is never used as
>> + * usb1 only has HSIC pins routed externally
>> + */
>> + ohci1: usb@00a01400 {
>> + compatible = "allwinner,sun9i-a80-ohci",
>> "generic-ohci";
>> + reg = <0x00a01400 0x100>;
>> + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&usb_mod_clk 3>, <&usb_mod_clk 4>;
>> + resets = <&usb_mod_clk 18>;
>> + phys = <&usbphy2>;
>> + phy-names = "usb";
>> + status = "disabled";
>> + };
>> +
>
> Is it worth declaring it then? If it's not never ever going to be used
> since no pins are routed outside of the SoC, I don't think it should
> be declared in the DTSI.
You have a point. Also the user manual doesn't even list OHCI1. I did
this work before the manual was available. I will update this patch.
ChenYu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
