Hi Eddie,
On 01/12/2015 08:08 AM, Eddie Huang wrote:
> Add earlycon support not only baudrate option, but also add noinit option.
> If use noinit option, 8250 earlycon will not init serial hardware and use
> loader setting.
I see this went into Greg's tty-testing branch.
The only point of this is to not program the divisor, right?
I ask because early_serial8250_setup() could already handle this without
extra options by simply not doing divisor programming if no baud option is
present.
And this blows up if the optional console= form is used:
console=uart,mmio32,<addr>,noinit
because the ttyS console will expect line settings for console match.
Regards,
Peter Hurley
> Signed-off-by: Eddie Huang <eddie.hu...@mediatek.com>
> ---
> drivers/tty/serial/8250/8250_early.c | 7 ++++---
> drivers/tty/serial/earlycon.c | 17 ++++++++++++-----
> include/linux/serial_8250.h | 2 ++
> include/linux/serial_core.h | 1 +
> 4 files changed, 19 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_early.c
> b/drivers/tty/serial/8250/8250_early.c
> index 4858b8a..a13d757 100644
> --- a/drivers/tty/serial/8250/8250_early.c
> +++ b/drivers/tty/serial/8250/8250_early.c
> @@ -138,19 +138,20 @@ static void __init init_port(struct earlycon_device
> *device)
> serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
> }
>
> -static int __init early_serial8250_setup(struct earlycon_device *device,
> +int __init early_serial8250_setup(struct earlycon_device *device,
> const char *options)
> {
> if (!(device->port.membase || device->port.iobase))
> return 0;
>
> - if (!device->baud) {
> + if (!device->baud && !device->noinit) {
> device->baud = probe_baud(&device->port);
> snprintf(device->options, sizeof(device->options), "%u",
> device->baud);
> }
>
> - init_port(device);
> + if (!device->noinit)
> + init_port(device);
>
> early_device = device;
> device->con->write = early_serial8250_write;
> diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
> index 64fe25a..4891251 100644
> --- a/drivers/tty/serial/earlycon.c
> +++ b/drivers/tty/serial/earlycon.c
> @@ -58,7 +58,7 @@ static int __init parse_options(struct earlycon_device
> *device,
> char *options)
> {
> struct uart_port *port = &device->port;
> - int mmio, mmio32, length;
> + int noinit, mmio, mmio32, length;
> unsigned long addr;
>
> if (!options)
> @@ -92,10 +92,17 @@ static int __init parse_options(struct earlycon_device
> *device,
> options = strchr(options, ',');
> if (options) {
> options++;
> - device->baud = simple_strtoul(options, NULL, 0);
> - length = min(strcspn(options, " ") + 1,
> - (size_t)(sizeof(device->options)));
> - strlcpy(device->options, options, length);
> + noinit = !strncmp(options, "noinit", 6);
> + if (noinit) {
> + device->noinit = noinit;
> + strlcpy(device->options, options, 6);
> + device->options[6] = '\0';
> + } else {
> + device->baud = simple_strtoul(options, NULL, 0);
> + length = min(strcspn(options, " ") + 1,
> + (size_t)(sizeof(device->options)));
> + strlcpy(device->options, options, length);
> + }
> }
>
> if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32)
> diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
> index e02acf0..0e26eec 100644
> --- a/include/linux/serial_8250.h
> +++ b/include/linux/serial_8250.h
> @@ -119,6 +119,8 @@ extern int serial8250_find_port(struct uart_port *p);
> extern int serial8250_find_port_for_earlycon(void);
> extern unsigned int serial8250_early_in(struct uart_port *port, int offset);
> extern void serial8250_early_out(struct uart_port *port, int offset, int
> value);
> +extern int early_serial8250_setup(struct earlycon_device *device,
> + const char *options);
> extern int setup_early_serial8250_console(char *cmdline);
> extern void serial8250_do_set_termios(struct uart_port *port,
> struct ktermios *termios, struct ktermios *old);
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index 057038c..72c6698 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -326,6 +326,7 @@ struct earlycon_device {
> struct uart_port port;
> char options[16]; /* e.g., 115200n8 */
> unsigned int baud;
> + int noinit;
> };
> int setup_earlycon(char *buf, const char *match,
> int (*setup)(struct earlycon_device *, const char *));
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
