This adds type-checking to pm_message_t, so that people can't confuse
it with int or u32. It also allows us to fix "disk yoyo" during
suspend (disk spinning down/up/down).
[We've tried that before; since that cpufreq problems were fixed and
I've tried make allyes config and fixed resulting damage. Please
apply,]
Signed-off-by: Pavel Machek <[EMAIL PROTECTED]>
--- a/arch/ppc/platforms/pmac_cpufreq.c
+++ b/arch/ppc/platforms/pmac_cpufreq.c
@@ -452,7 +452,7 @@ static u32 __pmac read_gpio(struct devic
return offset;
}
-static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32
state)
+static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy,
pm_message_t pmsg)
{
/* Ok, this could be made a bit smarter, but let's be robust for now. We
* always force a speed change to high speed before sleep, to make sure
--- a/drivers/base/power/resume.c
+++ b/drivers/base/power/resume.c
@@ -26,11 +26,11 @@ int resume_device(struct device * dev)
down(&dev->sem);
if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state) {
+ && dev->power.pm_parent->power.power_state.event) {
dev_err(dev, "PM: resume from %d, parent %s still %d\n",
- dev->power.power_state,
+ dev->power.power_state.event,
dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state);
+ dev->power.pm_parent->power.power_state.event);
}
if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
@@ -54,7 +54,7 @@ void dpm_resume(void)
list_add_tail(entry, &dpm_active);
up(&dpm_list_sem);
- if (!dev->power.prev_state)
+ if (!dev->power.prev_state.event)
resume_device(dev);
down(&dpm_list_sem);
put_device(dev);
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -13,10 +13,10 @@
static void runtime_resume(struct device * dev)
{
dev_dbg(dev, "resuming\n");
- if (!dev->power.power_state)
+ if (!dev->power.power_state.event)
return;
if (!resume_device(dev))
- dev->power.power_state = 0;
+ dev->power.power_state = PMSG_ON;
}
@@ -49,10 +49,10 @@ int dpm_runtime_suspend(struct device *
int error = 0;
down(&dpm_sem);
- if (dev->power.power_state == state)
+ if (dev->power.power_state.event == state.event)
goto Done;
- if (dev->power.power_state)
+ if (dev->power.power_state.event)
runtime_resume(dev);
if (!(error = suspend_device(dev, state)))
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -40,22 +40,22 @@ int suspend_device(struct device * dev,
int error = 0;
down(&dev->sem);
- if (dev->power.power_state) {
+ if (dev->power.power_state.event) {
dev_dbg(dev, "PM: suspend %d-->%d\n",
- dev->power.power_state, state);
+ dev->power.power_state.event, state.event);
}
if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state) {
+ && dev->power.pm_parent->power.power_state.event) {
dev_err(dev,
"PM: suspend %d->%d, parent %s already %d\n",
- dev->power.power_state, state,
+ dev->power.power_state.event, state.event,
dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state);
+ dev->power.pm_parent->power.power_state.event);
}
dev->power.prev_state = dev->power.power_state;
- if (dev->bus && dev->bus->suspend && !dev->power.power_state) {
+ if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
dev_dbg(dev, "suspending\n");
error = dev->bus->suspend(dev, state);
}
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -26,19 +26,19 @@
static ssize_t state_show(struct device * dev, struct device_attribute *attr,
char * buf)
{
- return sprintf(buf, "%u\n", dev->power.power_state);
+ return sprintf(buf, "%u\n", dev->power.power_state.event);
}
static ssize_t state_store(struct device * dev, struct device_attribute *attr,
const char * buf, size_t n)
{
- u32 state;
+ pm_message_t state;
char * rest;
int error = 0;
- state = simple_strtoul(buf, &rest, 10);
+ state.event = simple_strtoul(buf, &rest, 10);
if (*rest)
return -EINVAL;
- if (state)
+ if (state.event)
error = dpm_runtime_suspend(dev, state);
else
dpm_runtime_resume(dev);
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -869,7 +869,7 @@ EXPORT_SYMBOL(cpufreq_get);
* cpufreq_suspend - let the low level driver prepare for suspend
*/
-static int cpufreq_suspend(struct sys_device * sysdev, u32 state)
+static int cpufreq_suspend(struct sys_device * sysdev, pm_message_t pmsg)
{
int cpu = sysdev->id;
unsigned int ret = 0;
@@ -897,7 +897,7 @@ static int cpufreq_suspend(struct sys_de
}
if (cpufreq_driver->suspend) {
- ret = cpufreq_driver->suspend(cpu_policy, state);
+ ret = cpufreq_driver->suspend(cpu_policy, pmsg);
if (ret) {
printk(KERN_ERR "cpufreq: suspend failed in ->suspend "
"step on CPU %u\n", cpu_policy->cpu);
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1229,7 +1229,7 @@ static int generic_ide_suspend(struct de
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
- rqpm.pm_state = state;
+ rqpm.pm_state = state.event;
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
@@ -1248,7 +1248,7 @@ static int generic_ide_resume(struct dev
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_resume;
- rqpm.pm_state = 0;
+ rqpm.pm_state = PM_EVENT_ON;
return ide_do_drive_cmd(drive, &rq, ide_head_wait);
}
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -350,9 +350,9 @@ static int sc1200_suspend (struct pci_de
{
ide_hwif_t *hwif = NULL;
- printk("SC1200: suspend(%u)\n", state);
+ printk("SC1200: suspend(%u)\n", state.event);
- if (state == 0) {
+ if (state.event == PM_EVENT_ON) {
// we only save state when going from full power to less
//
@@ -386,8 +386,8 @@ static int sc1200_suspend (struct pci_de
/* You don't need to iterate over disks -- sysfs should have done that
for you already */
pci_disable_device(dev);
- pci_set_power_state(dev,state);
- dev->current_state = state;
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+ dev->current_state = state.event;
return 0;
}
@@ -396,8 +396,8 @@ static int sc1200_resume (struct pci_dev
ide_hwif_t *hwif = NULL;
printk("SC1200: resume\n");
- pci_set_power_state(dev,0); // bring chip back from sleep state
- dev->current_state = 0;
+ pci_set_power_state(dev, PCI_D0); // bring chip back from sleep
state
+ dev->current_state = PM_EVENT_ON;
pci_enable_device(dev);
//
// loop over all interfaces that are part of this pci device:
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -886,7 +886,7 @@ static int cinergyt2_suspend (struct usb
if (down_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
- if (state > 0) { /* state 0 seems to mean DEVICE_PM_ON */
+ if (state.event > PM_EVENT_ON) {
struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf);
#ifdef ENABLE_RC
cancel_delayed_work(&cinergyt2->rc_query_work);
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1363,19 +1363,7 @@ mpt_suspend(struct pci_dev *pdev, pm_mes
u32 device_state;
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
- switch(state)
- {
- case 1: /* S1 */
- device_state=1; /* D1 */;
- break;
- case 3: /* S3 */
- case 4: /* S4 */
- device_state=3; /* D3 */;
- break;
- default:
- return -EAGAIN /*FIXME*/;
- break;
- }
+ device_state=pci_choose_state(pdev, state);
printk(MYIOC_s_INFO_FMT
"pci-suspend: pdev=0x%p, slot=%s, Entering operating state [D%d]\n",
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -84,7 +84,7 @@
extern void mptscsih_remove(struct pci_dev *);
extern void mptscsih_shutdown(struct pci_dev *);
#ifdef CONFIG_PM
-extern int mptscsih_suspend(struct pci_dev *pdev, u32 state);
+extern int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
extern int mptscsih_resume(struct pci_dev *pdev);
#endif
extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char
**start, off_t offset, int length, int func);
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -1749,11 +1749,6 @@ static int vlsi_irda_suspend(struct pci_
struct net_device *ndev = pci_get_drvdata(pdev);
vlsi_irda_dev_t *idev;
- if (state < 1 || state > 3 ) {
- IRDA_ERROR("%s - %s: invalid pm state request: %u\n",
- __FUNCTION__, PCIDEV_NAME(pdev), state);
- return 0;
- }
if (!ndev) {
IRDA_ERROR("%s - %s: no netdevice \n",
__FUNCTION__, PCIDEV_NAME(pdev));
@@ -1762,12 +1757,12 @@ static int vlsi_irda_suspend(struct pci_
idev = ndev->priv;
down(&idev->sem);
if (pdev->current_state != 0) { /* already suspended */
- if (state > pdev->current_state) { /* simply go deeper */
- pci_set_power_state(pdev,state);
- pdev->current_state = state;
+ if (state.event > pdev->current_state) { /* simply go
deeper */
+ pci_set_power_state(pdev, pci_choose_state(pdev,
state));
+ pdev->current_state = state.event;
}
else
- IRDA_ERROR("%s - %s: invalid suspend request %u ->
%u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state);
+ IRDA_ERROR("%s - %s: invalid suspend request %u ->
%u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state.event);
up(&idev->sem);
return 0;
}
@@ -1781,8 +1776,8 @@ static int vlsi_irda_suspend(struct pci_
idev->new_baud = idev->baud;
}
- pci_set_power_state(pdev,state);
- pdev->current_state = state;
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ pdev->current_state = state.event;
idev->resume_ok = 1;
up(&idev->sem);
return 0;
@@ -1807,8 +1802,8 @@ static int vlsi_irda_resume(struct pci_d
return 0;
}
- pci_set_power_state(pdev, 0);
- pdev->current_state = 0;
+ pci_set_power_state(pdev, PCI_D0);
+ pdev->current_state = PM_EVENT_ON;
if (!idev->resume_ok) {
/* should be obsolete now - but used to happen due to:
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3259,7 +3259,7 @@ static void __devexit skge_remove(struct
}
#ifdef CONFIG_PM
-static int skge_suspend(struct pci_dev *pdev, u32 state)
+static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, wol = 0;
@@ -3279,7 +3279,7 @@ static int skge_suspend(struct pci_dev *
}
pci_save_state(pdev);
- pci_enable_wake(pdev, state, wol);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -1906,9 +1906,9 @@ typhoon_sleep(struct typhoon *tp, pci_po
*/
netif_carrier_off(tp->dev);
- pci_enable_wake(tp->pdev, pci_choose_state(pdev, state), 1);
+ pci_enable_wake(tp->pdev, state, 1);
pci_disable_device(pdev);
- return pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return pci_set_power_state(pdev, state);
}
static int
@@ -2274,7 +2274,7 @@ typhoon_suspend(struct pci_dev *pdev, pm
goto need_resume;
}
- if(typhoon_sleep(tp, state, tp->wol_events) < 0) {
+ if(typhoon_sleep(tp, pci_choose_state(pdev, state), tp->wol_events) <
0) {
printk(KERN_ERR "%s: unable to put card to sleep\n", dev->name);
goto need_resume;
}
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2232,7 +2232,7 @@ static void airo_read_stats(struct airo_
u32 *vals = stats_rid.vals;
clear_bit(JOB_STATS, &ai->flags);
- if (ai->power) {
+ if (ai->power.event) {
up(&ai->sem);
return;
}
@@ -2962,7 +2962,7 @@ static int airo_thread(void *data) {
break;
}
- if (ai->power || test_bit(FLAG_FLASHING, &ai->flags)) {
+ if (ai->power.event || test_bit(FLAG_FLASHING, &ai->flags)) {
up(&ai->sem);
continue;
}
@@ -5514,7 +5514,7 @@ static int airo_pci_resume(struct pci_de
pci_restore_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, ai->power), 0);
- if (ai->power > 1) {
+ if (ai->power.event > 1) {
reset_card(dev, 0);
mpi_init_descriptors(ai);
setup_card(ai, dev->dev_addr, 0);
@@ -7116,7 +7116,7 @@ static int airo_ioctl(struct net_device
int rc = 0;
struct airo_info *ai = (struct airo_info *)dev->priv;
- if (ai->power)
+ if (ai->power.event)
return 0;
switch (cmd) {
@@ -7195,7 +7195,7 @@ static void airo_read_wireless_stats(str
/* Get stats out of the card */
clear_bit(JOB_WSTATS, &local->flags);
- if (local->power) {
+ if (local->power.event) {
up(&local->sem);
return;
}
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -316,14 +316,14 @@ pci_set_power_state(struct pci_dev *dev,
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
- if (!pci_find_capability(dev, PCI_CAP_ID_PM))
+ switch (state.event) {
+ case PM_EVENT_ON:
return PCI_D0;
-
- switch (state) {
- case 0: return PCI_D0;
- case 3: return PCI_D3hot;
- default:
- printk("They asked me for state %d\n", state);
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_SUSPEND:
+ return PCI_D3hot;
+ default:
+ printk("They asked me for state %d\n", state.event);
BUG();
}
return PCI_D0;
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -317,7 +317,7 @@ int pcie_port_device_register(struct pci
static int suspend_iter(struct device *dev, void *data)
{
struct pcie_port_service_driver *service_driver;
- u32 state = (u32)data;
+ pm_message_t state = * (pm_message_t *) data;
if ((dev->bus == &pcie_port_bus_type) &&
(dev->driver)) {
@@ -328,9 +328,9 @@ static int suspend_iter(struct device *d
return 0;
}
-int pcie_port_device_suspend(struct pci_dev *dev, u32 state)
+int pcie_port_device_suspend(struct pci_dev *dev, pm_message_t state)
{
- device_for_each_child(&dev->dev, (void *)state, suspend_iter);
+ device_for_each_child(&dev->dev, &state, suspend_iter);
return 0;
}
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1601,7 +1601,7 @@ static int pmz_suspend(struct macio_dev
return 0;
}
- if (pm_state == mdev->ofdev.dev.power.power_state || pm_state < 2)
+ if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
return 0;
pmz_debug("suspend, switching to state %d\n", pm_state);
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1570,7 +1570,7 @@ static int __usb_suspend_device (struct
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (state <= intf->dev.power.power_state)
+ if (state.event <= intf->dev.power.power_state.event)
continue;
if (!intf->dev.driver)
continue;
@@ -1578,11 +1578,11 @@ static int __usb_suspend_device (struct
if (driver->suspend) {
status = driver->suspend(intf, state);
- if (intf->dev.power.power_state != state
+ if (intf->dev.power.power_state.event !=
state.event
|| status)
dev_err(&intf->dev,
"suspend %d fail, code %d\n",
- state, status);
+ state.event, status);
}
/* only drivers with suspend() can ever resume();
@@ -1595,7 +1595,7 @@ static int __usb_suspend_device (struct
* since we know every driver's probe/disconnect works
* even for drivers that can't suspend.
*/
- if (!driver->suspend || state > PM_SUSPEND_MEM) {
+ if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
#if 1
dev_warn(&intf->dev, "resume is unsafe!\n");
#else
@@ -1616,7 +1616,7 @@ static int __usb_suspend_device (struct
* policies (when HNP doesn't apply) once we have mechanisms to
* turn power back on! (Likely not before 2.7...)
*/
- if (state > PM_SUSPEND_MEM) {
+ if (state.event > PM_EVENT_FREEZE) {
dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
}
@@ -1733,7 +1733,7 @@ static int finish_port_resume(struct usb
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (intf->dev.power.power_state == PMSG_ON)
+ if (intf->dev.power.power_state.event == PM_EVENT_ON)
continue;
if (!intf->dev.driver) {
/* FIXME maybe force to alt 0 */
@@ -1747,11 +1747,11 @@ static int finish_port_resume(struct usb
/* can we do better than just logging errors? */
status = driver->resume(intf);
- if (intf->dev.power.power_state != PMSG_ON
+ if (intf->dev.power.power_state.event != PM_EVENT_ON
|| status)
dev_dbg(&intf->dev,
"resume fail, state %d code %d\n",
- intf->dev.power.power_state, status);
+ intf->dev.power.power_state.event,
status);
}
status = 0;
@@ -1934,7 +1934,7 @@ static int hub_resume(struct usb_interfa
unsigned port1;
int status;
- if (intf->dev.power.power_state == PM_SUSPEND_ON)
+ if (intf->dev.power.power_state.event == PM_EVENT_ON)
return 0;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1400,7 +1400,7 @@ static int usb_generic_suspend(struct de
driver = to_usb_driver(dev->driver);
/* there's only one USB suspend state */
- if (intf->dev.power.power_state)
+ if (intf->dev.power.power_state.event)
return 0;
if (driver->suspend)
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -641,7 +641,7 @@ show_registers (struct class_device *cla
spin_lock_irqsave (&ehci->lock, flags);
- if (bus->controller->power.power_state) {
+ if (bus->controller->power.power_state.event) {
size = scnprintf (next, size,
"bus %s, device %s (driver " DRIVER_VERSION ")\n"
"%s\n"
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -631,7 +631,7 @@ show_registers (struct class_device *cla
hcd->product_desc,
hcd_name);
- if (bus->controller->power.power_state) {
+ if (bus->controller->power.power_state.event) {
size -= scnprintf (next, size,
"SUSPENDED (no register access)\n");
goto done;
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1781,9 +1781,9 @@ sl811h_suspend(struct device *dev, pm_me
if (phase != SUSPEND_POWER_DOWN)
return retval;
- if (state <= PM_SUSPEND_MEM)
+ if (state.event == PM_EVENT_FREEZE)
retval = sl811h_hub_suspend(hcd);
- else
+ else if (state.event == PM_EVENT_SUSPEND)
port_power(sl811, 0);
if (retval == 0)
dev->power.power_state = state;
@@ -1802,7 +1802,7 @@ sl811h_resume(struct device *dev, u32 ph
/* with no "check to see if VBUS is still powered" board hook,
* let's assume it'd only be powered to enable remote wakeup.
*/
- if (dev->power.power_state > PM_SUSPEND_MEM
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND
|| !hcd->can_wakeup) {
sl811->port1 = 0;
port_power(sl811, 1);
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1533,7 +1533,7 @@ usbtest_ioctl (struct usb_interface *int
if (down_interruptible (&dev->sem))
return -ERESTARTSYS;
- if (intf->dev.power.power_state != PMSG_ON) {
+ if (intf->dev.power.power_state.event != PM_EVENT_ON) {
up (&dev->sem);
return -EHOSTUNREACH;
}
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2022,17 +2022,16 @@ static int atyfb_pci_suspend(struct pci_
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
-#ifdef CONFIG_PPC_PMAC
+#ifndef CONFIG_PPC_PMAC
/* HACK ALERT ! Once I find a proper way to say to each driver
* individually what will happen with it's PCI slot, I'll change
* that. On laptops, the AGP slot is just unclocked, so D2 is
* expected, while on desktops, the card is powered off
*/
- if (state >= 3)
- state = 2;
+ return 0;
#endif /* CONFIG_PPC_PMAC */
- if (state != 2 || state == pdev->dev.power.power_state)
+ if (state.event == pdev->dev.power.power_state.event)
return 0;
acquire_console_sem();
@@ -2071,12 +2070,12 @@ static int atyfb_pci_resume(struct pci_d
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
acquire_console_sem();
- if (pdev->dev.power.power_state == 2)
+ if (pdev->dev.power.power_state.event == 2)
aty_power_mgmt(0, par);
par->asleep = 0;
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2526,18 +2526,18 @@ int radeonfb_pci_suspend(struct pci_dev
struct radeonfb_info *rinfo = info->par;
int i;
- if (state == pdev->dev.power.power_state)
+ if (state.event == pdev->dev.power.power_state.event)
return 0;
printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
- pci_name(pdev), state);
+ pci_name(pdev), state.event);
/* For suspend-to-disk, we cheat here. We don't suspend anything and
* let fbcon continue drawing until we are all set. That shouldn't
* really cause any problem at this point, provided that the wakeup
* code knows that any state in memory may not match the HW
*/
- if (state != PM_SUSPEND_MEM)
+ if (state.event == PM_EVENT_FREEZE)
goto done;
acquire_console_sem();
@@ -2616,7 +2616,7 @@ int radeonfb_pci_resume(struct pci_dev *
struct radeonfb_info *rinfo = info->par;
int rc = 0;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
if (rinfo->no_schedule) {
@@ -2626,7 +2626,7 @@ int radeonfb_pci_resume(struct pci_dev *
acquire_console_sem();
printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
- pci_name(pdev), pdev->dev.power.power_state);
+ pci_name(pdev), pdev->dev.power.power_state.event);
if (pci_enable_device(pdev)) {
@@ -2637,7 +2637,7 @@ int radeonfb_pci_resume(struct pci_dev *
}
pci_set_master(pdev);
- if (pdev->dev.power.power_state == PM_SUSPEND_MEM) {
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
/* Wakeup chip. Check from config space if we were powered off
* (todo: additionally, check CLK_PIN_CNTL too)
*/
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1506,12 +1506,12 @@ static int i810fb_suspend(struct pci_dev
struct i810fb_par *par = (struct i810fb_par *) info->par;
int blank = 0, prev_state = par->cur_state;
- if (state == prev_state)
+ if (state.event == prev_state)
return 0;
- par->cur_state = state;
+ par->cur_state = state.event;
- switch (state) {
+ switch (state.event) {
case 1:
blank = VESA_VSYNC_SUSPEND;
break;
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -2113,7 +2113,7 @@ static int savagefb_suspend (struct pci_
printk(KERN_DEBUG "state: %u\n", state);
acquire_console_sem();
- fb_set_suspend(info, state);
+ fb_set_suspend(info, pci_choose_state(dev, state));
savage_disable_mmio(par);
release_console_sem();
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -201,7 +201,7 @@ struct cpufreq_driver {
/* optional */
int (*exit) (struct cpufreq_policy *policy);
- int (*suspend) (struct cpufreq_policy *policy, u32 state);
+ int (*suspend) (struct cpufreq_policy *policy, pm_message_t
pmsg);
int (*resume) (struct cpufreq_policy *policy);
struct freq_attr **attr;
};
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -186,7 +186,9 @@ extern int pm_suspend(suspend_state_t st
struct device;
-typedef u32 __bitwise pm_message_t;
+typedef struct pm_message {
+ int event;
+} pm_message_t;
/*
* There are 4 important states driver can be in:
@@ -207,9 +209,13 @@ typedef u32 __bitwise pm_message_t;
* or something similar soon.
*/
-#define PMSG_FREEZE ((__force pm_message_t) 3)
-#define PMSG_SUSPEND ((__force pm_message_t) 3)
-#define PMSG_ON ((__force pm_message_t) 0)
+#define PM_EVENT_ON 0
+#define PM_EVENT_FREEZE 1
+#define PM_EVENT_SUSPEND 2
+
+#define PMSG_FREEZE ({struct pm_message m; m.event = PM_EVENT_FREEZE; m; })
+#define PMSG_SUSPEND ({struct pm_message m; m.event = PM_EVENT_SUSPEND; m; })
+#define PMSG_ON ({struct pm_message m; m.event = PM_EVENT_ON;
m; })
struct dev_pm_info {
pm_message_t power_state;
--- a/sound/oss/cs46xx.c
+++ b/sound/oss/cs46xx.c
@@ -4174,7 +4174,7 @@ static int cs_ioctl_mixdev(struct inode
list_for_each(entry, &cs46xx_devs)
{
card = list_entry(entry, struct
cs_card, list);
- cs46xx_suspend(card, 0);
+ cs46xx_suspend(card, PMSG_ON);
}
}
@@ -5749,7 +5749,7 @@ static int cs46xx_pm_callback(struct pm_
case PM_SUSPEND:
CS_DBGOUT(CS_PM, 2, printk(KERN_INFO
"cs46xx: PM suspend request\n"));
- if(cs46xx_suspend(card, 0))
+ if(cs46xx_suspend(card, PMSG_SUSPEND))
{
CS_DBGOUT(CS_ERROR, 2, printk(KERN_INFO
"cs46xx: PM suspend request
refused\n"));
@@ -5779,7 +5779,7 @@ static int cs46xx_suspend_tbl(struct pci
struct cs_card *s = PCI_GET_DRIVER_DATA(pcidev);
CS_DBGOUT(CS_PM | CS_FUNCTION, 2,
printk(KERN_INFO "cs46xx: cs46xx_suspend_tbl request\n"));
- cs46xx_suspend(s, 0);
+ cs46xx_suspend(s, state);
return 0;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
