On Feb 18 2015 or thereabouts, jsanchezf wrote: > > So could you run "sudo hid-recorder /dev/hidraw*" while making some > > inputs on the touchpad? > > Moving my finger and pressing the buttons on the touchpad seemed to show no > events on hid-recorder. This is the full log for it: > http://pastebin.com/YqZfkvLy > > I just realised maybe you meant stylus input, so this is another log with > some stylus input on it: http://pastebin.com/WSCY6Zq0 >
Arf, it looks like the wacom driver ignores the debug interface. Can you re-run hid-recorder on all interfaces with the stock 3.19 kernel (or whichever you had that allowed the pen to work, but without my latest patches). Cheers, Benjamin > > > 2015-02-18 23:07 GMT+01:00 Benjamin Tissoires <benjamin.tissoi...@redhat.com > >: > > > On Feb 18 2015 or thereabouts, jsanchezf wrote: > > > Hello Benjamin > > > > > > Following your instructions I managed to compile and install the wacom > > > module properly (actually I had to run automake and autoconf to make it > > all > > > work but no problems after that). > > > > > > The stylus is working just fine now. Unfortunately the touch pad part > > > doesn't seem to be working at all, and Xorg isn't mapping it to an event > > > file like it used to. The stylus event file is not seeing any data when I > > > touch the pad either. > > > > > > By the way, I'm actually using the USB variant of the Bamboo Pad. > > > > > > > Yep, I know. That's why I asked you to test :) > > > > So could you run "sudo hid-recorder /dev/hidraw*" while making some > > inputs on the touchpad? > > > > I'd like to check if your touchpad is actually switched to the debug > > mode. > > > > Cheers, > > Benjamin > > > > > Looking at the log file from Xorg, though, I can see how it's properly > > > detecting the "Wacom USB Bamboo PAD Pen stylus" device and adding "Wacom > > > USB Bamboo PAD Pen touch" as an extended input device. Here's the full > > log: > > > http://pastebin.com/k3SqtQN5 > > > > > > I should mention I have no Xorg configuration done whatsoever besides the > > > monitor resolution setup (which is not really relevant > > > > > > > > > > > > 2015-02-17 20:27 GMT+01:00 Benjamin Tissoires < > > benjamin.tissoi...@redhat.com > > > >: > > > > > > > The stylus of this device works just fine out of the box. > > > > The touch is seen by default as a mouse with relative events and some > > > > gestures. > > > > Switching the default in raw mode allows us to retrieve the touch data > > > > and have a consistent user experience accross all the multitouch > > touchpads. > > > > > > > > Note that the buttons of this devices are reported through the touch > > > > interface. There is no 'Pad' interface. It seemed more natural to have > > > > the BTN_LEFT and BTN_RIGHT reported with the touch because they are > > > > placed under the touch interface and it looks like they belong to the > > > > touch part. > > > > > > > > Signed-off-by: Benjamin Tissoires <benjamin.tissoi...@redhat.com> > > > > --- > > > > > > > > Hi, > > > > > > > > several things before we can merge this: > > > > > > > > Josep, Frederic: > > > > Would you mind testing this patch with your Bamboo pads? I bought the > > > > wireless > > > > variant and the USB one has a different ProductID. Hopefully, it will > > go > > > > smoothly with the current patch. > > > > > > > > Peter, Ping, Jason: > > > > Given the nature of the device, I did not exported the 2 buttons as a > > > > separate > > > > pad device. > > > > Do you back me up with this choice? > > > > > > > > Jiri: > > > > As mentioned to Josep and Frederic, this has not been tested against > > the > > > > USB > > > > (wired) version of the device. So please wait at least for one > > tested-by > > > > before > > > > considering including this patch. > > > > > > > > Thanks everyone! > > > > Benjamin > > > > > > > > drivers/hid/wacom_sys.c | 23 ++++++++++++++++++ > > > > drivers/hid/wacom_wac.c | 62 > > > > +++++++++++++++++++++++++++++++++++++++++++++++++ > > > > drivers/hid/wacom_wac.h | 3 +++ > > > > 3 files changed, 88 insertions(+) > > > > > > > > diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c > > > > index e1ec192..ef4d147 100644 > > > > --- a/drivers/hid/wacom_sys.c > > > > +++ b/drivers/hid/wacom_sys.c > > > > @@ -410,6 +410,9 @@ static int wacom_query_tablet_data(struct > > hid_device > > > > *hdev, > > > > else if (features->type == WACOM_27QHDT) { > > > > return wacom_set_device_mode(hdev, 131, 3, 2); > > > > } > > > > + else if (features->type == BAMBOO_PAD) { > > > > + return wacom_set_device_mode(hdev, 2, 2, 3); > > > > + } > > > > } else if (features->device_type == BTN_TOOL_PEN) { > > > > if (features->type <= BAMBOO_PT && features->type != > > > > WIRELESS) { > > > > return wacom_set_device_mode(hdev, 2, 2, 2); > > > > @@ -1417,6 +1420,20 @@ static int wacom_probe(struct hid_device *hdev, > > > > goto fail_allocate_inputs; > > > > } > > > > > > > > + /* > > > > + * Bamboo Pad has a generic hid handling for the Pen, and we > > > > switch it > > > > + * into debug mode for the touch part. > > > > + * We ignore the other interfaces. > > > > + */ > > > > + if (features->type == BAMBOO_PAD) { > > > > + if (features->pktlen == WACOM_PKGLEN_PENABLED) { > > > > + features->type = HID_GENERIC; > > > > + } else if (features->pktlen != WACOM_PKGLEN_BP_TOUCH) { > > > > + error = -ENODEV; > > > > + goto fail_shared_data; > > > > + } > > > > + } > > > > + > > > > /* set the default size in case we do not get them from hid */ > > > > wacom_set_default_phy(features); > > > > > > > > @@ -1451,6 +1468,12 @@ static int wacom_probe(struct hid_device *hdev, > > > > features->y_max = 4096; > > > > } > > > > > > > > + /* > > > > + * Same thing for Bamboo PAD > > > > + */ > > > > + if (features->type == BAMBOO_PAD) > > > > + features->device_type = BTN_TOOL_FINGER; > > > > + > > > > if (hdev->bus == BUS_BLUETOOTH) > > > > features->quirks |= WACOM_QUIRK_BATTERY; > > > > > > > > diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c > > > > index 1a65079..8627581 100644 > > > > --- a/drivers/hid/wacom_wac.c > > > > +++ b/drivers/hid/wacom_wac.c > > > > @@ -1826,6 +1826,49 @@ static int wacom_bpt_irq(struct wacom_wac > > *wacom, > > > > size_t len) > > > > return 0; > > > > } > > > > > > > > +static int wacom_bamboo_pad_irq(struct wacom_wac *wacom, size_t len) > > > > +{ > > > > + struct input_dev *input = wacom->input; > > > > + unsigned char *data = wacom->data; > > > > + unsigned char *finger_data, prefix; > > > > + unsigned id; > > > > + int x, y; > > > > + bool valid; > > > > + > > > > + /* bit 2 in data[1] is set when there is touch information > > > > available */ > > > > + if ((len != WACOM_PKGLEN_BP_TOUCH) || > > > > + (data[0] != WACOM_REPORT_BP_TOUCH) || > > > > + !(data[1] & 0x02)) > > > > + return 0; > > > > + > > > > + prefix = data[9]; > > > > + > > > > + for (id = 0; id < wacom->features.touch_max; id++) { > > > > + valid = !!(prefix & BIT(id)) && > > > > + !wacom->shared->stylus_in_proximity; > > > > + > > > > + input_mt_slot(input, id); > > > > + input_mt_report_slot_state(input, MT_TOOL_FINGER, > > valid); > > > > + > > > > + if (!valid) > > > > + continue; > > > > + > > > > + finger_data = data + 10 + id * 3; > > > > + x = finger_data[0] | ((finger_data[1] & 0x0f) << 8); > > > > + y = (finger_data[2] << 4) | (finger_data[1] >> 4); > > > > + > > > > + input_report_abs(input, ABS_MT_POSITION_X, x); > > > > + input_report_abs(input, ABS_MT_POSITION_Y, y); > > > > + } > > > > + > > > > + input_mt_sync_frame(input); > > > > + > > > > + input_report_key(input, BTN_LEFT, prefix & 0x40); > > > > + input_report_key(input, BTN_RIGHT, prefix & 0x80); > > > > + > > > > + return 1; > > > > +} > > > > + > > > > static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) > > > > { > > > > unsigned char *data = wacom->data; > > > > @@ -1962,6 +2005,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, > > > > size_t len) > > > > sync = wacom_bpt_irq(wacom_wac, len); > > > > break; > > > > > > > > + case BAMBOO_PAD: > > > > + sync = wacom_bamboo_pad_irq(wacom_wac, len); > > > > + break; > > > > + > > > > case WIRELESS: > > > > sync = wacom_wireless_irq(wacom_wac, len); > > > > break; > > > > @@ -2300,6 +2347,13 @@ int > > wacom_setup_pentouch_input_capabilities(struct > > > > input_dev *input_dev, > > > > 0, 0); > > > > } > > > > break; > > > > + case BAMBOO_PAD: > > > > + __clear_bit(ABS_MISC, input_dev->absbit); > > > > + input_mt_init_slots(input_dev, features->touch_max, > > > > + INPUT_MT_POINTER); > > > > + __set_bit(BTN_LEFT, input_dev->keybit); > > > > + __set_bit(BTN_RIGHT, input_dev->keybit); > > > > + break; > > > > } > > > > return 0; > > > > } > > > > @@ -2953,6 +3007,12 @@ static const struct wacom_features > > > > wacom_features_0x30C = > > > > { "Wacom ISDv5 30C", .type = WACOM_24HDT, /* Touch */ > > > > .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30A, .touch_max = 10, > > > > .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; > > > > +static const struct wacom_features wacom_features_0x318 = > > > > + { "Wacom USB Bamboo PAD", 4095, 4095, /* Touch */ > > > > + .type = BAMBOO_PAD, 35, 48, .touch_max = 4 }; > > > > +static const struct wacom_features wacom_features_0x319 = > > > > + { "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */ > > > > + .type = BAMBOO_PAD, 35, 48, .touch_max = 4 }; > > > > static const struct wacom_features wacom_features_0x323 = > > > > { "Wacom Intuos P M", 21600, 13500, 1023, 31, > > > > INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, > > > > @@ -3101,6 +3161,8 @@ const struct hid_device_id wacom_ids[] = { > > > > { USB_DEVICE_WACOM(0x314) }, > > > > { USB_DEVICE_WACOM(0x315) }, > > > > { USB_DEVICE_WACOM(0x317) }, > > > > + { USB_DEVICE_WACOM(0x318) }, > > > > + { USB_DEVICE_WACOM(0x319) }, > > > > { USB_DEVICE_WACOM(0x323) }, > > > > { USB_DEVICE_WACOM(0x32A) }, > > > > { USB_DEVICE_WACOM(0x32B) }, > > > > diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h > > > > index 021ee1c..bf43e0f 100644 > > > > --- a/drivers/hid/wacom_wac.h > > > > +++ b/drivers/hid/wacom_wac.h > > > > @@ -33,6 +33,7 @@ > > > > #define WACOM_PKGLEN_MTTPC 40 > > > > #define WACOM_PKGLEN_DTUS 68 > > > > #define WACOM_PKGLEN_PENABLED 8 > > > > +#define WACOM_PKGLEN_BP_TOUCH 32 > > > > > > > > /* wacom data size per MT contact */ > > > > #define WACOM_BYTES_PER_MT_PACKET 11 > > > > @@ -67,6 +68,7 @@ > > > > #define WACOM_REPORT_24HDT 1 > > > > #define WACOM_REPORT_WL 128 > > > > #define WACOM_REPORT_USB 192 > > > > +#define WACOM_REPORT_BP_TOUCH 16 > > > > > > > > /* device quirks */ > > > > #define WACOM_QUIRK_MULTI_INPUT 0x0001 > > > > @@ -122,6 +124,7 @@ enum { > > > > BAMBOO_PT, > > > > WACOM_24HDT, > > > > WACOM_27QHDT, > > > > + BAMBOO_PAD, > > > > TABLETPC, /* add new TPC below */ > > > > TABLETPCE, > > > > TABLETPC2FG, > > > > -- > > > > 2.1.0 > > > > > > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
